Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 2 of 4 FirstFirst 1234 LastLast
Results 16 to 30 of 51

Thread: E2 by the ripper

  1. #16
    Standard RSP member
    Join Date
    27 Jul 2007
    Posts
    25
    Mentioned
    0 Post(s)
    Rep Power
    0

    Default E2_1.0.21_elite_premium

    am lansat azup si nu se conecteaza la azbox am incercat sa pun Firmware - rev. 0.9.3877 si nimic acelasi mesaji RESCUE MODE?

  2. #17
    Golden Member qwess's Avatar
    Join Date
    26 Oct 2009
    Location
    Walachia / Paname
    Posts
    823
    Mentioned
    2 Post(s)
    Rep Power
    60

    Default

    verifica IP din VFD, configuratia router-azbox(cred ca e necesar DHCP-legat in LAN),
    daca utilizezi vista sau W7 reinstaleaza in mod compatibilitate XP, run as..,verifica starea firewall fata de AZUP.
    Dupa repornire cu E2 pe USB, ar trebui sa intre in recovery mode.
    Odata conectat AzUp poti incerca cu acelasi patch.bin E2.
    BaFTA!




    Azbox HD with OpenSPA 3.0 powered by OSCam
    UE46F8000 powered by SamyGO_OSCam





  3. #18
    Standard RSP member
    Join Date
    01 Jan 2008
    Posts
    98
    Mentioned
    0 Post(s)
    Rep Power
    60

    Default Procedura recuperare

    Am trecut pe un post anterior procedura de recuperare cu jtag a unui Azbox omorit de Enigma!
    Daca a instalat careva versiunea ultima de Enigma si poate sa ne spuna si noua daca merge si tunerul de satelit?

  4. #19
    Standard RSP member
    Join Date
    27 Jul 2007
    Posts
    25
    Mentioned
    0 Post(s)
    Rep Power
    0

    Talking E2_1.0.21_elite_premium

    gata am reusit sa il fac erea din vina mea iesise mufa de net din el si nu se conecta AZUP am instalat e2 acum fac probe sa vad cum merge

  5. #20
    Golden Member qwess's Avatar
    Join Date
    26 Oct 2009
    Location
    Walachia / Paname
    Posts
    823
    Mentioned
    2 Post(s)
    Rep Power
    60

    Default

    Quote Originally Posted by radu67 View Post
    Am trecut pe un post anterior procedura de recuperare cu jtag a unui Azbox omorit de Enigma!
    Daca a instalat careva versiunea ultima de Enigma si poate sa ne spuna si noua daca merge si tunerul de satelit?
    Parca cele de Premium+, nu erau "gata".




    Azbox HD with OpenSPA 3.0 powered by OSCam
    UE46F8000 powered by SamyGO_OSCam





  6. #21
    Standard RSP member
    Join Date
    27 Jul 2007
    Posts
    25
    Mentioned
    0 Post(s)
    Rep Power
    0

    Angry E2_1.0.21_elite_premium

    am pus e2 pe un azbox premium se pare ca tuneru merge am dat scan la 19e apar toate canalele dar nu am imagine pe nicun canal

  7. #22
    Standard RSP member iceman's Avatar
    Join Date
    13 Sep 2007
    Location
    Cluj-Napoca
    Posts
    30
    Mentioned
    0 Post(s)
    Rep Power
    0

    Default

    Este vorba doar de o versiune "beta", finalizata prin 02.09. O versiune functionala, cu drivere incluse, se va lansa in perioada urmatoare. Este o chestiune de zile sau saptamani, in funcţie de cum merg lucrurile. Sa speram ca de Craciun putem renunta pentru totdeauna la firware-ul Opensat, care multora le-a scos peri albi.

    .
    Last edited by delta2k2; 22-09-10 at 10:33. Reason: Regula 12 : Quote inutil
    Cluj-Napoca
    --------------------------------------------------
    AzBox HD Premium, HDD Western Digital Caviar Green 750 GB, conservă Hyundai HSS 3169,
    Antenă toroidală T90 12 LNB (Astra 1, Astra 2, Astra 3, Astra 4, HB, W2, Thor, Amos, Eurobird 9, Badr, Hellas, Turksat)

  8. #23
    Golden Member istvan's Avatar
    Join Date
    14 Feb 2007
    Location
    Baia Mare
    Posts
    396
    Mentioned
    2 Post(s)
    Rep Power
    65

    Default AzBox HD Web Interface v 1.0 by DDamir

    AzBox HD Web Interface v 1.0 by DDamir
    Attached Files Attached Files
    RSP-TEAM

  9. #24
    Golden Member istvan's Avatar
    Join Date
    14 Feb 2007
    Location
    Baia Mare
    Posts
    396
    Mentioned
    2 Post(s)
    Rep Power
    65

    Default DVB driver od The_Rippera

    I uploaded new em8634dvb.ko file. Pls replace old one from /lib/modules/2.6.22.19-19-the_ripper/extra/.

    There is bootup file too, replace it from /etc/init.d, so you can activate showiframe bootlogo.

    Reboot pls.

    I started writing down changes.txt for DVB driver.
    Attached Files Attached Files
    RSP-TEAM

  10. #25
    Golden Member qwess's Avatar
    Join Date
    26 Oct 2009
    Location
    Walachia / Paname
    Posts
    823
    Mentioned
    2 Post(s)
    Rep Power
    60
    Last edited by istvan; 15-10-10 at 16:51.




    Azbox HD with OpenSPA 3.0 powered by OSCam
    UE46F8000 powered by SamyGO_OSCam





  11. #26
    Golden Member qwess's Avatar
    Join Date
    26 Oct 2009
    Location
    Walachia / Paname
    Posts
    823
    Mentioned
    2 Post(s)
    Rep Power
    60

    Default new version of Enigma 2 by the_ripper and team

    doar pentru Elite/Premium


    What is new ?

    - FTA SD and HD channels working. ( DD 2.0 , AC3 working by HDMI tested on Einsfestival HD )
    - New IR driver ( few more mapped buttons e.g Info button, Audio selection is Check button on RCU )
    - Fixed Section filters and PID selection.
    - Added part of CA system
    - Multimedia support for MPEG2 , MPEG4 ( XviD ), h264, and various audio support.
    - Please read ReadMe file if You want also to install additional things to get working Multimedia by Media Player in E2.
    - If You have Full HD TV , You can set resolution by editing bootup file located in :
    /etc/init.d
    Find line :
    Code:
    # Elite and Premium
    below You will see line insmode ...

    and replace existing insmode line with this one :
    Code:
    insmod /lib/modules/2.6.22.19-19-the_ripper/extra/em8634dvb.ko options="-analog -f PAL_BG -digital -f HDMI_1080p50 -hdmi_chip SiI9030 0 14 15 100 0"
    Few tips :
    Before loading Enigma 2 , move Your dish to some satellite ( Astra 19.2 e is good because of FTA HD channels ), as on E2 currently we didnt fix DiseQc bug ( We will fix it when we finish Premium+ driver ).
    Try to use Simple configuration in Tuner Configuration, e.g choose satellite on which position currently You are.

    README for MULTIMEDIA :
    First download 2 .so filles attached to this post and put them in :
    /usr/lib/gstreamer-0.10 directory, and after that follow procedure below :

    Code:
    If You want also to test Multimedia on AzBox Enigma 2 media player , You have to install 3 IPK files located in this archive :
    
    gst-plugin-asf_0.10.16-r0.0_mipsel.ipk
    gst-plugin-avi_0.10.25-r0.0_mipsel.ipk
    gst-plugin-dvbmediasink-dbg_0.10+cvs20101006-r0_dm800.ipk
    
    working formats:
    audio: mpeg, aac, ac3, dts, wma (but not pro), pcm (not all ?)
    video: mpeg2, mpeg4 (xvid), h264 (only show singe frames)
    
    IPK Installation procedure :
    Transfer 3 *.ilk files to /tmp folder of Your AzBox and run this commands, one by one :
    
    ipkg install /tmp/gst-plugin-asf_0.10.16-r0.0_mipsel.ipk
    ipkg install /tmp/gst-plugin-avi_0.10.25-r0.0_mipsel.ipk
    ipkg install /tmp/gst-plugin-dvbmediasink-dbg_0.10+cvs20101006-r0_dm800.ipk
    
    If You cant use ipkg install, use command opkg install or ipkg-extract .
    If You see error while installing .ipk files, that is ok, dont worry about it, but dont forgett to transfer 2 .so files attached to my post in addons.zip archive to directory :
    /usr/lib/gstreamer-0.10

    Last edited by qwess; 20-10-10 at 15:38.




    Azbox HD with OpenSPA 3.0 powered by OSCam
    UE46F8000 powered by SamyGO_OSCam





  12. #27
    Golden Member qwess's Avatar
    Join Date
    26 Oct 2009
    Location
    Walachia / Paname
    Posts
    823
    Mentioned
    2 Post(s)
    Rep Power
    60

    Default

    Metoda alternativa de instalare E2
    patch.bin in fat32 usb pen, update boot menu, press update, then reboot, then open azup and press "update" with usb stick STILL in azbox hd, using IP that shows in VDF.
    then after update goes to 100%, remove usb and reboot.
    all should go well to 100% in VDF display.


    Wireless for Premium and Premium+

    Thanks to joseba for providing and compiling driver !

    Download archive, unzip it, and transfer whole folder wlan by FTP to /tmp folder on Your receiver

    Connect to Your receiver by telnet and execute this commands :

    mkdir -p /etc/Wireless/RT61STA

    cd /tmp

    cp /tmp/wlan/rt2561.bin /etc/Wireless/RT61STA/

    cp /tmp/wlan/rt2561s.bin /etc/Wireless/RT61STA/

    cp /tmp/wlan/rt2661.bin /etc/Wireless/RT61STA/

    cp /tmp/wlan/rt61sta.dat /etc/Wireless/RT61STA/rt61sta.dat

    dos2unix /etc/Wireless/RT61STA/rt61sta.dat

    cd /lib/modules/2.6.22.19-19-the_ripper/kernel/

    mkdir drivers

    cd drivers

    mkdir net

    cd net

    mkdir wireless

    cp /tmp/wlan/rt61.ko /lib/modules/2.6.22.19-19-the_ripper/kernel/drivers/net/wireless

    modprobe rt61.ko

    cd /tmp

    wget http://oozoon-dreamboxupdate.de/open...-r5_mipsel.ipk

    ipkg install wireless-tools_29-r5_mipsel.ipk ( If error appear dont worry )

    ifconfig ra0 192.168.1.22 up ( my gateway is 192.168.1.1, so i put ifconfig ra0 192.168.1.22 up )

    iwlist ra0 scanning ( this will list available networks in your range )

    output will be something like this :

    Code:
    root@AZBox:/tmp# iwlist ra0 scanning
    ra0       Scan completed :
              Cell 01 - Address: 00:0C:21:16:DD:2A
                        Mode:Managed
                        ESSID:"HomeLan"
                        Channel:6
                        Encryption key:on
                        Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
                                  11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
                                  48 Mb/s; 54 Mb/s
                        Quality:82/100  Signal level:-57 dBm  Noise level:-111 dBm
                        IE: IEEE 802.11i/WPA2 Version 1
                            Group Cipher : TKIP
                            Pairwise Ciphers (1) : TKIP
                            Authentication Suites (1) : PSK
    iwconfig ra0 essid HomeLan

    iwconfig ra0 mode Managed

    iwconfig ra0 channel 6 ( as my network broadcast on channel 6, in Your case choose what is appropriate for Your network ).

    iwconfig ra0 key s:mywpakey (mywpakey will be your network key ).


    Result is when i ping it from my pc :

    MickeySa:~ mickey$ ping 192.168.1.22
    PING 192.168.1.22 (192.168.1.22): 56 data bytes
    64 bytes from 192.168.1.22: icmp_seq=0 ttl=64 time=5.569 ms
    64 bytes from 192.168.1.22: icmp_seq=1 ttl=64 time=3.591 ms
    64 bytes from 192.168.1.22: icmp_seq=2 ttl=64 time=1.501 ms
    64 bytes from 192.168.1.22: icmp_seq=3 ttl=64 time=1.637 ms
    64 bytes from 192.168.1.22: icmp_seq=4 ttl=64 time=1.649 ms
    64 bytes from 192.168.1.22: icmp_seq=5 ttl=64 time=1.738 ms
    64 bytes from 192.168.1.22: icmp_seq=6 ttl=64 time=1.533 ms
    64 bytes from 192.168.1.22: icmp_seq=7 ttl=64 time=1.795 ms
    64 bytes from 192.168.1.22: icmp_seq=8 ttl=64 time=1.754 ms
    64 bytes from 192.168.1.22: icmp_seq=9 ttl=64 time=1.649 ms

    Thats all, soon GUI version.

    This procedure works also with Elite model, which have WiFi stick with this RT chipset
    ************************
    pentru teste cu CCcam folositi mipsel pentru DM.
    ************************
    control media: hdb1
    = HDD
    ************************






    Azbox HD with OpenSPA 3.0 powered by OSCam
    UE46F8000 powered by SamyGO_OSCam





  13. #28
    Golden Member qwess's Avatar
    Join Date
    26 Oct 2009
    Location
    Walachia / Paname
    Posts
    823
    Mentioned
    2 Post(s)
    Rep Power
    60

    Default CA support Fully Fixed.

    for scrambled channels:
    new driver em8634dvb.ko attached ...
    It is necessary to unpack the new file and FTP to transfer the location

    lib/modules/2.6.22.19-19-the_ripper/extra




    Azbox HD with OpenSPA 3.0 powered by OSCam
    UE46F8000 powered by SamyGO_OSCam





  14. #29
    Golden Member istvan's Avatar
    Join Date
    14 Feb 2007
    Location
    Baia Mare
    Posts
    396
    Mentioned
    2 Post(s)
    Rep Power
    65

    Default

    azbox hd elite ENIGMA2 CCCAM FAST ZAPPING

    http://www.youtube.com/watch?v=odL0X7-f9eM
    RSP-TEAM

  15. #30
    Golden Member qwess's Avatar
    Join Date
    26 Oct 2009
    Location
    Walachia / Paname
    Posts
    823
    Mentioned
    2 Post(s)
    Rep Power
    60

    Default

    Da , se misca bine, avand in vedere ca e o versiune alpha.
    Unele blocari, cateva green screen dar sa nu cerem prea mult in momentul de fata.
    Testat cu cccam214, mgcamd135a, si oscam 093080
    cu mgcamd a decodat 2 canale dupa care s-a blocat, cccam ruleaza destul de bine,dar cu unele blocari pe HD, insa cu oscam merge mult mai stabil+zapp mai bun.
    In media player mai e foarte mult de munca, ....nu a rulat nimic din contentul meu din HDD(doar mp3).-sper sa ajunga la nivelul fw.OpenSAT, altfel....nu vad rostul E2 pe azbox.
    Scanarea e foarte lenta,insa puteti incarca cu Dreamset(fw.Enigma2 ver4).
    pentru a testa canalele codate nu uitati sa inlocuiti driverul postat mai sus(chmod755+reboot).
    **La incarcarea cu vechea versiune AZUP am avut o eroare de instalare-am dezinstalat si instalat versiunea prezenta in arhiva E2_Update_1.0.25.rar, si totul a mers OK.

    inapoi la 4890!
    Last edited by qwess; 22-10-10 at 10:32. Reason: adaugare




    Azbox HD with OpenSPA 3.0 powered by OSCam
    UE46F8000 powered by SamyGO_OSCam





Page 2 of 4 FirstFirst 1234 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •