VizCam v.0.8

[horatyu]

deja a aparut versiunea a 4-a

easysurf.ro_vizcamV0.4_sh4.zip - 195.3 Kb

vizcam is based on oscam and is compiled....

- only for sh4-boxes
- only with dvb-api support
- only one conf needed

see in the vizcam.conf and add your f-line from the cccam-server

- show Label (from) in ecm-info
- internal changes

[mario08]

Este aparuta de 1-2 zile , cu versiunea asta ma chinui eu si nu am reusit sa vad nimic
Nu prea concide ce mi-a scris Mihaip aici : http://www.sateliti.info/showthread....100#post124100
Am copiat asa cum am gasit in locatile/fisierele respective si dat 755 la toate fisierele din arhiva descarcata ( sant 3 fisiere - 1 este in folderul camscript )
User si pass fiind la server , nu am gasit sect. de cardreader in vizcam.conf , cel puti la vers. aceasta a 4-tra
Rog frumos daca se doreste de catre cineva careia ii functioneaza sa scrie pas cu pas , am intalnit si alta varianta de completare pe sat-universe la fisierul vizcam.conf

Pun mai jos fisierul vizcam.conf cu modificarile pe care le-am facut eu :

[global]
logfile = stdout
#logfile = /tmp/vizcam.log ###log output to file###
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 160
bindwait = 120
resolvedelay = 30
nice = -10
serialreadertimeout = 1500
maxlogsize = 3200

####### nur hier account-daten von cccamserver eintragen #######
[reader]
label = Server - aici se trece domeniu - xxx.dyndns.org/tv
protocol = cccam
device = 192.168.1.111,12155 - aici se trece ip-ul dreamului cu portul 12000
account = test,pass - aici se trece user-ul/pass-ul folosit la serverul cccam sau cele folosite in linia F: din serverul cccam
group = 1
cccversion = 2.0.11 - aici se trece vers. de cccam
cccbuild = 2892 - acest build poate ramne indiferent de vers. de cccam trecuta mai sus , sau este valabil numai la vers. 2.0.11 , la alte vers. ce se scrie in locul build-ului respectiv
###############################################################

[dvbapi]
enabled = 1
au = 0
boxtype = dbox2 - aici se scrie ufs910
user = viz - aici se scrie anonim
priority = 0D05:000004,0d22:000004

[account]
user = viz
pwd = viz
group = 1,2
monlevel = 2
au = 1
services = hdplus,skyfullhd,skyhd,skybuli,skysport,skyextra,skyfilm,mtvunlimited,orfcw,srgswiss,arenafamily,are naxxl,xxx,xxxseca,nds,nds1
betatunnel = 1833.007E:1702,1833.007F:1702,1833.0080:1702,1833.0081:1702,1833.0082:1702,1833.0083:1702,1833.0084: 1702
keepalive = 1

[hdplus]
caid=1830
srvid=EF10,EF11,EF74,EF75,EF76,277E

[skyfullhd]
caid=1702,1833
srvid=0084,0081,007e,0080,0083,0082,007F,000A,0001,000B,002b,0009,0029,001b,002a,000e,0044,003e,18b2 ,000d,000C,0034,0017,0008,0204,0014,0024,0032,4462,4461,003c,0298,0043,0010,0206,0016,0203,003f,001d ,3397,3398,0045,0018,0042,0022,0019,001a,700a,001c,0013,3393,3394,003d,6ff1,00df,0011,00dd,00de,00fd ,014d,0143,0139,012f,0125,011b,0107,0111,016b,0175,0035,3331,00a8,3395,7009,6fff,0015,0201,0159,0163 ,016d,0046,00fb,0105,010f,0119,0123,012d,0137,0141,014b,0106,0110,011a,0124,012e,0138,0142,014c,0156 ,0160,00fc,0096,0097,0098,0099,009A,009B,009C

[mtvunlimited]
caid=0B00
srvid=6FF3,6FEE,6FEF,6FF1,6FF0,6FFF

[orfcw]
caid=0D05
srvid=132F,1330,3332,32C9,32CA,32CB,32CC,32CD,32CE,32CF,32D0,32D1,32D2,32D3,32D4,4E27

[srgswiss]
caid=0500
srvid=36B3,36B2,36B8,36B9,0385,038B,03DE


[arenaxxl]
caid=0D22
srvid=0045,001B,003F,6FF1,6FEE,6FEF,003D,003E,0042,001D,3391,3392,3393,3394,3395,3396,3397,3398,3399 ,339A,339C,4461,4462,3335,4F7C,0046

[xxx]
caid=0500
srvid=4285,3786,3788,1251,0086,0082,21B8,378F,378D,378C,36B4,36B6,36B3,36B7,36B5,36B2,36B1,36B8,3792

[xxxseca]
caid=0100
srvid=4F62,4F55


[nds]
caid=09C4
srvid=007F,0080

[BigBrother]
caid = 1702
srvid = 000F


Am trecut cum am facut eu , acum daca este ceva gresit , rog frumos a se modifica unde si cu ce trebuie pt. a functiona

Linia F: din serverul de cccam ( dm ) este identica cu ceea folosita in cazul incubusului , ma refer ca idee si distante/carduri

Multumesc anticipat de info

[wambertos]

[global]
logfile             = stdout
clienttimeout       = 5000
fallbacktimeout     = 2500
clientmaxidle       = 120
cachedelay          = 160
bindwait            = 120
resolvedelay        = 30
nice                = -10
serialreadertimeout = 1500
maxlogsize          = 3200

####### nur hier account-daten von cccamserver eintragen(traducere: numai in acest loc se pun datele de conectare la serverul de CCcam) #######
[reader]
label      = Fritzbox  aici se pune orice                    
protocol   = cccam     
device     = 192.168.xxx.xxx,1xxxx  datele serverului la care ne conectam         
account    = user,pass  din linia F:                 
group      = 1
cccversion = 2.0.11
cccbuild   = 2892
###############################################################

[dvbapi]
enabled             = 1
au                  = 0
boxtype             = ufs910   pt receptoare SH4
user                = viz
priority            = 0D95:000004,0B00:000000  de astea am eu nevoie

[account]
user                = viz
pwd                 = viz
group               = 1,2
#uniq                = 0
#sleep               = 0
monlevel            = 2
au                  = 1
services            = hdplus,skyfullhd,skyhd,skybuli,skysport,skyextra,skyfilm,mtvunlimited,orfcw,srgswiss,arenafamily,arenaxxl,xxx,xxxseca,nds,nds1
betatunnel          = 1833.007E:1702,1833.007F:1702,1833.0080:1702,1833.0081:1702,1833.0082:1702,1833.0083:1702,1833.0084:1702
keepalive           = 1
#numusers            = 0
#penalty             = 0

[zildan]

Ca sa mearga "original" trebuie sa existe o corespondenta intre versinea si build-ul de la cccam
Valorile posibile sunt urmatoarele:

#cccversion = 2.0.11
#cccbuild = 2892

#cccversion = 2.1.1
#cccbuild = 2971

#cccversion = 2.1.2
#cccbuild = 3094

#cccversion = 2.1.3
#cccbuild = 3165

#cccversion = 2.1.4
#cccbuild = 3191

Evident fara #.

[caruga]

Hi

Is it possible to connect to cccam as a client with vizcam?

[dbhungry]

I am not sure if you can have a good translation of our friends posts, in this thread, but for a short answer to your question, yes, vizcam works as cccam client for sh4 receivers. Kathrein UFS910 is one of them, but this is something that everybody already knows, and vizcam being a child of oscam only for sh4 processors it is obvious.

We will try in the next days, as we have more experience with this emu, to gather all the settings and translate them in English for international support. Keep in touch @caruga

[caruga]

Ok thanks to reply.