OScam: Exemple de configurare

wambertos · 01-03-10, 02:12

Important: vizitati site-ul Wiki al proiectului oscam pt. a adapta fisierele postate mai jos la cerintele voastre.

Dupa cum deja se stie newcs a decedat insa oscam ia luat deja locul si e pe cale sa devina un adevarat "allrounder".
Este open source si se lucreaza la el intr-un ritm de-a dreptul infernal. Uneori e greu sa ti pasul cu dezvoltatorii. Ce astazi e valabil, maine este deja depasit.
Voi incerca (subliniez) sa tin pasul si sa dau o mina de ajutor celor ce se incumeta sa testeze acest cardserver/emu.
Va fi foarte greu,deoarece configurarea lui depinde de mai multi factori: card/cardreader, software, hardware si de preferintele fiecaruia.
Voi posta exemple de configurare a celor 3 fisiere indispensabile din totalul de 9 fisiere ce se folosesc la ora actuala.
Absoluta nevoie avem de fisierele: oscam.server, oscam.user si oscam.conf

Exemplu dat de mine arata configurarea oscam pt. ORF(0D95)--smartmouse/phoenix--Kathrein UFS 910
Oscam este legat la mbox prin newcamd.
Incepind cu svn1745 este nevoie de urmatoarea configurare pt. fisierul

oscam.conf

Code:

[global]
serverip            = 127.0.0.1
logfile             = stdout
cwlogdir            = 0
disablelog          = 0
disableuserfile     = 1
usrfileflag         = 0
clienttimeout       = 5000
fallbacktimeout     = 2000
clientmaxidle       = 120
cachedelay          = 0
bindwait            = 120
netprio             = 0
resolvedelay        = 30
unlockparental      = 0
nice                = -5
serialreadertimeout = 1500
maxlogsize          = 10
waitforcards        = 1
preferlocalcards    = 1

[monitor]
port                = 988
serverip            = 127.0.0.1
nocrypt             = 192.168.0.0-192.168.255.255
aulow               = 30
hideclient_to       = 0
monlevel            = 2

[newcamd]
port                = 12001@0D95:000004
serverip            = 127.0.0.1
k_ey                = 0102030405060708091011121314 # stergeti _  
allowed             = 127.0.0.1,192.168.0.0-192.168.255.255
keepalive           = 1

[dvbapi]
enabled             = 0
au                  = 1
boxtype             = ufs910
user                = anonymus

[webif]
httpport            = 88
httpuser            = oscamuser
httppwd             = parolata
httpcss             = /var/***s/blue.css
httptpl             = 
httpscript          = 
httprefresh         = 10
httpallowed         = 192.168.0.0-192.168.255.255
httphideidleclients = 0
httpreadonly        = 0

[anticasc]
enabled             = 0
numusers            = 0
sampletime          = 2
samples             = 10
penalty             = 0
aclogfile           = ./oscam_ac.log
denysamples         = 8
fakedelay           = 1000

Aveti aici un fisier optional ce schimba designul webif-ului.
Cei talentati pot modifica dupa gustul lor fisierul.
Ar fi frumos daca l-ar pune apoi la dispozitia tuturor!

easysurf.ro_webif.rar - 2.3 Kb

oscam.server

Code:

[reader]
label           = ORF
protocol        = mouse
detect          = CD
device          = /dev/ttyUSB0 
emmcache        = 1,3,2
caid            = 0D95
group           = 1
cardmhz         = 600
mhz             = 600
deprecated      = 1

oscam.user

Code:

[account]
user                = kathy
pwd                 = ufs
disabled            = 0
expdate             = 
group               = 1
hostname            = 127.0.0.1
uniq                = 0
sleep               = 0
monlevel            = 4
au                  = 1
services            = orf
caid                = 0D95&FFFF
betatunnel          = 
ident               = 0D95:000004
keepalive           = 1
numusers            = 0
penalty             = 0

Pentru a folosi din plin webif, avem nevoie de oscam.srvid care contine datele providerului(caid,srvid) decodat de cardul local.
Editati fisierul pt. cardul vostru pastrind acest format.
oscam.srvid

Code:

0D95:132f|ORF GOGUtal|ORF 1 HD 
0D95:1330|ORF GOGUtal|ORF 2 HD 
0D95:3332|ORF GOGUtal|Austria 9 TV
0D95:4E27|ORF GOGUtal|Puls 4 Austria 
0D95:32C9|ORF GOGUtal|ORF 1
0D95:32CA|ORF GOGUtal|ORF 2
0D95:32CB|ORF GOGUtal|ORF 2 Wien 
0D95:32CC|ORF GOGUtal|ORF 2 NiederÖsterreich 
0D95:32CD|ORF GOGUtal|ORF 2 Burgenland 
0D95:32CE|ORF GOGUtal|ORF 2 OberÖsterreich 
0D95:32CF|ORF GOGUtal|ORF 2 Salzburg 
0D95:32D0|ORF GOGUtal|ORF 2 Tirol 
0D95:32D1|ORF GOGUtal|ORF 2 Vorarlberg 
0D95:32D2|ORF GOGUtal|ORF 2 Steiermark 
0D95:32D3|ORF GOGUtal|ORF 2 Kärnten 
0D95:32D4|ORF GOGUtal|ATV+

Autocenzura forumului a modificat unele cuvinte care cu putina fantezie pot fi corectate in config.

---------- Post added at 21:20 ---------- Previous post was at 20:07 ----------

Adaug si linia C: din cwshare.cfg al mbox-ului, prin care oscam se leaga la mbox:

mbox
cwshare.cfg

Code:

 C: { 127.0.0.1 12001 kathy ufs 01 02 03 04 05 06 07 08 09 10 11 12 13 14 } { 10 } { 0D950004:0D950400 } # ORF-ICE 0D95

---------- Post added at 22:14 ---------- Previous post was at 21:20 ----------

La ora actuala se pot configura toate fisierele(din cite stiu eu), mai putin oscam.server(reader), prin webif !

Un exemplu cind avem 2 cardreadere externe, in acest caz Smargo configurate insa in mouse-modus
si nu in smartreader-modus, cu card TVR si MTV Unlimited, legate tot la mbox prin newcamd.
Preluati config din postul de sus unde inlocuiti in oscam.conf doar newcamd:

Code:

[newcamd]
port                = 12000@0B00:000000;12001@0500:025900
serverip            = 127.0.0.1
***                 = 0102030405060708091011121314
allowed             = 127.0.0.1,192.168.0.0-192.168.255.255
keepalive           = 1

In fisierul oscam.server trebuie configurate 2 reader pt. ce le 2 carduri:
In cazul in care folositi smargo in smartreader-modus, folositi:
protocol = smartreader
device = 001:004(in cazul acesta)
deactivati smargopatch = 0

Numarul bus(001) si device (004,005) il aflati prin webif/Readers/Scan USB sau in telnet prin comanda: lsusb

Code:

[reader]
label        = MTV
protocol     = mouse
detect       = CD
#device       = 001:004
device       = /dev/ttyUSB0
emmcache     = 1,3,2
caid         = 0B00
group        = 1
smargopatch  = 1
fallback     = 1
deprecated   = 1

[reader]
label        = TVR
protocol     = mouse
detect       = CD
#device       = 001:005
device       = /dev/ttyUSB1
emmcache     = 1,3,2
caid         = 0500
group        = 1
smargopatch  = 1
fallback     = 1
deprecated   = 1

oscam.user
Configuratie cu un singur user.
Daca vreti sa dati cuiva linie direct din oscam, aici se adauga inca un user.

Code:

[account]
user                = numele
pwd                 = parola
disabled            = 0
expdate             = 
group               = 1
hostname            = 
uniq                = 0
sleep               = 0
monlevel            = 4
au                  = 1
services            = 
caid                = 0B00&FFFF,0500&FFFF
betatunnel          = 
ident               = 0B00:000000;0500:025900
keepalive           = 1
numusers            = 0
penalty             = 0

oscam.srvid

Code:

0B00:6FF0|MTV Unlimited|VH-1 
0B00:6FF1|MTV Unlimited|VH-1 Classic 
0B00:6FEE|MTV Unlimited|MTV Hits 
0B00:6FEF|MTV Unlimited|MTV Dance 
0B00:6FF3|MTV Unlimited|MTV TWO 

0500:0001|TVR RO|TVR 1
0500:0002|TVR RO|TVR 2
0500:000F|TVR RO|TVR HD

mbox
cwshare.cfg

Code:

C: { 127.0.0.1 12000 numele parola 01 02 03 04 05 06 07 08 09 10 11 12 13 14 } { 40 } { 0B000000:0B000000 } # MTV
C: { 127.0.0.1 12001 numele parola 01 02 03 04 05 06 07 08 09 10 11 12 13 14 } { 40 } { 05005900:05025900 } # TVR

La newcamd unde apar stelutzele ***, puneti in locul lor k e y , fara pauze

---------- Post added at 22:34 ---------- Previous post was at 22:14 ----------

Cunoscut fiind faptul ca mbox nu face au, ne folosim foarte simplu de mgcamd fara a modifica ceva in oscam.
Se adauga in cazul in care aveti un Kathrein,in newcamd.list :

Code:

CWS = 127.0.0.1 12001 numele parola 01 02 03 04 05 06 07 08 09 10 11 12 13 14

In cazul unui DM avem 2 fisiere unde se adauga linia de sus: newcamd.conf si newcamd.list

Daca avem 2 carduri adaugam liniile in felul urmator:

Code:

CWS_MULTIPLE = 127.0.0.1 12000:12001 numele parola 01 02 03 04 05 06 07 08 09 10 11 12 13 14

mg_cfg

A: { 01 }
G: { 01 }

---------- Post added at 00:12 ---------- Previous post was at 22:34 ----------

2 exemple de webif design ca sa aveti o idee cum arata. AM postat mai sus un rar ce contine cele 2 designuri.

blue.css

black.css

Thread: OScam: Exemple de configurare

Thread Tools

Display

Threaded View

OScam: Exemple de configurare

Posting Permissions