Note de testare ...
Koala se afla in teste de cca. o luna ! timp in care a aparut o noua revizie de firmware si doua revizii CAS+EMU.
Dupa cum spuneam deja , Koala este un sistem deschis cu doua nivele de interfata: nivelul user ( al utilizatorului exclusiv de meniu ) ,
nivelul expert ( al specialistului care-si inregistreaza propriile emulatoare). Cele doua nivele de interfata sint mult mai bine servite de
ultima revizie de FW in sensul ca meniul are o fereastra care permite activarea tuturor componentelor : CAS+EMU built-in si addon-uri
expert. Intre componentele built-in se gasesc : Keditor ( un editor al tabelei de keys ) , XcamConfigura ( configurator al conexiunii la
serverul de sharing , Mcas ( multicas in context de sharing ) , XcamClient ( client de sharing CCcam, NewCamd ). Am folosit pentru
testare urmatoarele emulatoare : MgCamd ( EMU + client CCcam) , incubusCamd ( client CCcam ) si OctaCam ( client CCcam ).
Receptorul Koala este nivelul "light" al familiei din care face parte si Octagon SF 1018 ( HD twin tunner ) fapt pentru care emulatoarele
si componentele built-in sint comune. Orice emu compatibil .sh40 , asa cum sint cele care functioneaza pe softul DGS pentru IPBOX ,
vor functiona si aici.
Evident am verificat cum functioneaza play-ul de .AVI ( XVID ) ... merge la FIX ! daca setati ca limba de meniu si subtitle limba romana
... filmul curge lin ..cu subtitrati ( .srt) in romaneste cu diacritice !
Sistemul multicas este din cele mai bune vazuta de mine ... cardurile testate fiind Focus, Akta si TVR ...au pornit fara surprize !
Performantele de sharing sint la nivelul celor ale lui MgCamd ... merge bine cu servere de versiuni egale sau inferioare CCcam 2.1.2 !
Pentru cei care vor avea posibilitatea de a testa Koala !
a) emulatoare si alte executabile /var/bin
b) fisiere de configurare ( MgCamd,incubus,octacam) /var/keys
c) softcam.key in /var/keys
d) configurare emu built-in /var/etc/cadrclient.conf
Acesta din urma este un caz special ... cu o sintaxa aparte ... merita sa aruncati o privire !
#
# Comment lines can start with # or ;
#
# every client line starts with the client name, followed by some arguments:
# 'hostname' is the name of the server
# 'port' is the port on the server
# 'emm' is a flag to allow EMM transfers to the server
# (0=disabled 1=enabled)
# 'caid' (optional) caid on which this client should work
# 'mask' (optional) mask for caid e.g. caid=1700 mask=FF00 would allow
# anything between 1700 & 17FF.
# Default is 1700 & FF00. If only caid is given mask is FFFF.
# You may give multiple caid/mask values comma separated
# (e.g. 1702,1722,0d0c/ff00).
# 'username' is the login username
# 'password' is the login password
#
# radegast client
radegast:hostname:port:emm/caid/mask
#
# aroureos client
# 'hexbase'
# 'hexserial' card data for which EMM updates should be send
aroureos:hostname:port:emm/caid/mask:hexbase:hexserial
#
# camd33 client (tcp protocol)
# 'aeskey' is the AES key (32bytes), disable encryption if missing
camd33:hostname:port:emm/caid/mask:username:password:aeskey
#
# camd35 client (udp protocol)
camd35:hostname:port:emm/caid/mask:username:password
#
# cardd client
cardd:hostname:port:emm/caid/mask:username:password
#
# buffy client
# 'aeskey' is the AES key (32bytes), disable encryption if missing
buffy:hostname:port:emm:username:password:aeskey
#
# newcamd client
# 'cfgkey' is the config key (28bytes)
#newcamd:127.0.0.1:32000:0/caid/mask:username:password:cfgKey
#newcamd:192.168.10.107:32000:0/0000/0000:dummy:dummy:0102030405060708091011121314
#newcamd:127.0.0.1:32000:0/0000/0000:dummy:dummy:0102030405060708091011121314
#
# gbox client
#
# NOTE: hostname & port will be ignore. GBOX must be runnning on the local
# machine. For convinience you should choose localhost:8004
gbox:hostname:port:emm/caid/mask
#
# cccam client (via LD_PRE_LOAD wrapper)
#
# NOTE: hostname will be ignore. CCcam must be runnning on the local machine
# 'socket' is the name of the camd socket file. For multiple cards add %d
# into the string. This will be replaced with the number 0-3.
# e.g. /var/emu/chroot%d/tmp/camd.socket
# cccam:hostname:port:emm/caid/mask:socket
#
# (the real) cccam client
#
# NOTE: this is a real client. You don't need to have CCcam running on local
# machine.
# cccam2:hostname:port:emm/caid/mask:username:pass
#
cccam2:myserver.homelinux.com:12000:0/0/FFFF:tatamishu:password
Cred ca deja exista e2 pentru acest aparat.
Sunt curios ce si cum cu OctaCam.
Sh40, AML, prime focus 1,5m si altele ...
DA - exista deja o implementare Enigma2 pe stick ! pe care nu o agreez deoarece necesita inlocuirea din mers a
bootloaderului Flash cu cel pt. USB ( stick sau Hdd ) ! dar se pare ca se lucreaza deja la versiunea Flash si evident
bootloaderul care stie tot ce trebuie !
OctaCam este o implementare de client CCcam , multiserver , sintaxa ca la CCcam , ca stabilitate parca un pic sub
MgCamd ! mic ...mic..de tot ...57Kb !!!
Last edited by MihaiP; 15-02-10 at 23:35.
Rectificare ! nu exista inca ... o implementare Enigma2 pe Optibox Koala ! dintr-o confuzie regretabila ( care m-a costat ! )
... am confundat cele doua receptoare frati ...Octagon 1018 si 1008 ! ... Octagon 1008 este echivalentul Koala si nu are
inca E2 ! Costul ? hmm ... ca la oricare experiment ...am ucis bootloaderul ! asa ca sint in silentio stampa ...o saptamina !
P.S. Pe forumul HD Freaks ... moderatorul sectiunii SF 1008 spune ca in 3-4 saptamini va exista si o versiune E2 pentru Koala !
probabil ca la acel moment va fi chiar Flash !
Last edited by MihaiP; 17-02-10 at 19:28.
Posting Permissions
Reply With Quote
