Howto Setup SkyIT 093b Card with Ubuntu / Debian +

[me1960]

How To Setup SkyIT 093b Card with Ubuntu / Debian + OSCAM + SMARGO + CCCAM

Thanks @ markformosa

'' This is a step by step guide how to get your SkyIT NDS3 093b card back up and running. With Ubuntu or Debian and with a Smargo Reader.

Some linux skills and CCcam experience is needed here as I am not going in detail on how to use these.

In Ubuntu / Debian :

1. Stop your CCcam server session and leave it down.

2. Make sure your CCcam is not setup running at system startup, OSCAM needs to run first.

3. Make sure your CCcam is not trying to open your Smargo usb port. Place a # in front of your CCcam line where you activate your reader.

4. Download the latest version of OSCAM. Currently I have tested with 0.99.4.528svn-i686

5. Copy and set chmod 755 rights the above oscam binary file. I placed file in /usr/local/bin/

6. In /usr/local/etc/ create 3 files as follows: oscam.conf oscam.server oscam.user with the below data within it:

for oscam.conf:


[global]
nice = -19
WaitForCards = 1
[monitor]
port = 988
aulow = 120
monlevel = 0
[newcamd]
key = 0102030405060708091011121314
port = 34000@093b:000000

for oscam.server:


[reader]
Label = SkyItalia
Protocol = mouse
Detect = cd
Device = /dev/ttyUSB0
mhz = 357
EMMCache = 1,1,2
Group = 1
CAID = 093B
BoxID = place your boxID here, I have not tested without it

for oscam.user:


[account]
user = user
pwd = pass
group = 1
uniq = 1
caid = 093b
ident = 093b:000000
AU = SkyItalia
monlevel = 0

7. Now Simply shutdown your linux server. Power off motherboard so SMARGO reader has no power then turn server back on.

8. When server is up, run oscam from /usr/local/bin/ like this: ./oscamfile -b

9. Check file located in /var/log/oscam.log this should give you good news.

10. Place N line in CCcam.cfg

N: 127.0.0.1 34000 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
11. Run your CCcam and test. ''

[boxer]

can you have more than 1 user?

[siemens]

Incercand de 2 zile sa ajut un prieten cu Sky It in Oscam, m-am cam impotmolit si doar poporul de pe sateliti ma mai scoate afara.

Problema e in felul urmator:
- card sky it 002 adica 093b
- debian
- infinity unlimited
- ultimul oscam

Setari:

oscam.conf

GNU nano 2.0.7 FiĹier: oscam.conf

#
# main configuration
#


[global]
nice = -1
WaitForCards  = 1
#ClientTimeout = 5
#LogFile = stdout
#Level = 15
#CacheDelay = 120
#httpport = 83
# monitor

[monitor]
port = 988
aulow = 120
monlevel = 0

# protocols
#[camd35]
#Port = 3333

[newcamd]
key = 0102030405060708091011121314
port = 34000@093b:000000

oscam.server

[reader]
Label = SkyItalia
Protocol = mouse
Detect = cd
Device = /dev/ttyUSB0
Customspeed = 0
Mhz = 357
Cachenano = 56
BlockNano = 02,4E,4F,50,51,53
EMMCache = 0,1,2
Group = 1
CAID = 093B
#BoxID = 14 91 47 AE

oscam.user

[account]
user = user
pwd = pass
group = 1
uniq = 1
caid = 093b
ident = 093b:000000
AU = SkyItalia
monlevel = 0

si un ultim log

-------------------------------------------------------------------------------
>> OSCam <<  cardserver started at Tue Jan 26 23:27:32 2010
-------------------------------------------------------------------------------
2010/01/26 23:27:32   3008 s   version=0.99.4svn, build #1373S, system=i686-pc-linux, nice=-1
2010/01/26 23:27:32   3008 s   max. clients=509, client max. idle=120 sec
2010/01/26 23:27:32   3008 s   max. logsize=unlimited
2010/01/26 23:27:32   3008 s   client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2010/01/26 23:27:32   3008 s   shared memory initialized (size=4184176, id=32769)
2010/01/26 23:27:32   3008 s   auth size=4744
2010/01/26 23:27:32   3008 s   Cannot open file "/usr/local/etc/oscam.services" (errno=2)
2010/01/26 23:27:32   3008 s   userdb reloaded: 0 accounts freed, 1 accounts loaded, 0 expired, 0 disabled
2010/01/26 23:27:32   3008 s   signal handling initialized (type=sysv)
2010/01/26 23:27:32   3008 s   can't open file "/usr/local/etc/oscam.srvid" (err=2), no service-id's loaded
2010/01/26 23:27:32   3009 s   monitor: initialized (fd=6, port=988)
2010/01/26 23:27:32   3009 s   camd 3.3x: disabled
2010/01/26 23:27:32   3009 s   camd 3.5x: disabled
2010/01/26 23:27:32   3009 s   cs378x: disabled
2010/01/26 23:27:32   3009 s   newcamd: initialized (fd=7, port=34000, crypted)
2010/01/26 23:27:32   3009 s   CAID: 093B
2010/01/26 23:27:32   3009 s   provid #0: 000000
2010/01/26 23:27:32   3009 s   radegast: disabled
2010/01/26 23:27:32   3009 s   resolver thread started
2010/01/26 23:27:32   3009 s   logger started (pid=3012)
2010/01/26 23:27:32   3009 s   resolver started (pid=3013, delay=30 sec)
2010/01/26 23:27:32   3009 s   http started (pid=3014)
2010/01/26 23:27:32   3014 h   HTTP Server listening on port 0
2010/01/26 23:27:32   3009 s   reader started (pid=3015, device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2010/01/26 23:27:32   3009 s   Waiting for local card init ....
2010/01/26 23:27:35   3015 r03 card detected
2010/01/26 23:27:40   3015 r03 ATR: 3F FD 13 25 02 50 80 0F 33 B0 13 69 FF 4A 50 D0 80 00 49 54 03
2010/01/26 23:27:41   3015 r03 Type: Videoguard Sky Italia new (093B)
2010/01/26 23:27:43   3015 r03 card system not supported
2010/01/26 23:27:43   3015 r03 card initializing error
2010/01/26 23:27:43   3009 s   Init for all local cards done !
2010/01/26 23:27:43   3009 s   anti cascading disabled
2010/01/26 23:27:47   3009 s   client(1) connect from 127.0.0.1 (pid=3120, pipfd=13)
2010/01/26 23:27:47   3120 c01 encrypted newcamd:34000-client 127.0.0.1 granted (user, au=skyitalia)
2010/01/26 23:27:47   3120 c01 user user authenticated successfully (using client 4343)
2010/01/26 23:27:47   3120 c01 AU wont be used on this port -> disable AU

Ce setari sa modific, ce alte setari sa folosesc? Orice solutie e bine venita.