problema acces router

[milumil]

Deci:
Routerul se da moca de un provider de internet,nu stiu ce soft are dar , da ip cu 172.16.x.x
Procedura standard de resset nu functioneaza, nici la pagina login nu se poate ajunge.
Am inteles ca se poate interveni numai pe porul 22 ,bineinteles cu user si passoword care nu le stiu.
Se poate schimba softul cumva?
Are 4MB flash si 16 MB ram.
Mai are si portul 53 deschis

[zappa]

Cauta la openwrt sau dd-wrt cum se poate pune soft pe el. De putut se poate sigur. Dar daca schimbi firmware-ul nu pierzi garantia?

http://dd-wrt.com/wiki/index.php/WGR614_v8
http://www.dd-wrt.com/site/support/router-database

Netgear WGR614 v8 Router details Additional information
Chipset Broadcom5354 Initial flashing requieres special file!
DD-WRT Wiki: WGR614 V8 / WGR614L

RAM 16 MB
FLASH 4 MB

[milumil]

Am gasit ceva aici dar nu inteleg pasul 1.
link:http://www.myopenrouter.com/article/...llation-Guide/


Installing DD-WRT From a Serial Console to the WGR614L

1.
Run minicom/hyper terminal from a Linux/Windows machine. Configure the baud rate and the device properly and connect the serial console to your PC
.
2.
Connect your PC to the LAN port of 614L with a straight cable and assign a IP in the '192.168.1' subnet (I am assuming that the default router IP is 192.168.1.1).
3.
Press ctrl+C and reboot the router. Router will now give you the CFE prompt.
4.
From the CFE prompt run the TFTP server bu running 'tftpd' command.
5.
Upload the 'chk' image downloaded from 'myopenrouter' using the following command -
'tftp -m binary 192.168.1.1 -c put dd-wrt.v24-9281_mor_NEWD_SF_mini.chk'
6.
Now the image will be written to the router flash and will be rebooted automatically after successful write.

[fery21]

http://www.myopenrouter.com/article/...nsole-Windows/