N3 in phoenix pe pc cu linux

[sosozah]

Mai departe nu vrea sa mearga nicicum. Am incercat si la 6 Mhz, se comporta la fel ca la 3.57, dupa cele 3 rinduri Keyman nu mai face nimic.
Am inceput sa am dubii in privinta beka si resea. Cu jkeys si def pentru n3, trebuie sa pun la IRD model HNS 1160 sau pe neagra3? Ca obtin coduri diferite.

[zmeura]

Cum apare in ultima fereastra e bine,a initilizat cardul si e in regula.Nu vad sa se fi logat ca user cineva si sa nu fie mai departe problema,la linia N.

[sosozah]

Nu ar trebui sa mai apara citeva rinduri de genul:
[ 23:48:08 ] [ Nagra ] using rsa key from config.
[ 23:48:09 ] [ Loader ] Card 1801 on port /dev/sci0 ready
[ 23:48:09 ] [ Loader ] Starting Newcamd Server on port 20000
[ 23:48:09 ] [ Loader ] Starting Radegast Server on port 16000
[ 23:48:09 ] [ NewCS ] Ready to GO!
[ 23:48:09 ] [ Newcamd ] Newcamd thread Server started on port 20000
newcamd: main loop
?
Asa am gasit pe net si tot asteptam sa primesc si eu mesajele astea. Am facut de proba un server newcs pe windows si reactioneaza la fel ca cel pe linux.

[sosozah]

Am gasit greseala: nu stiu de unde am luat newcs ca, desi cautam v 1.67, era o versiune mai veche si probabil nu stia sa se descurce cu N3.
Acum functioneaza:
21:15:11 ] [ Nagra ] using rsa key from config.
[ 21:15:11 ] [ Loader ] Card 1801 on port /dev/ttyS0 ready
[ 21:15:11 ] [ Loader ] Starting Newcamd Server on port 34000
[ 21:15:11 ] [ Newcamd ] Newcamd thread Server started on port 34000
[ 21:15:11 ] [ Newcamd:34000 ] Connection from 127.0.0.1
[ 21:15:11 ] [ Newcamd:34000 ] Can't decrypt client msg, rejecting!
[ 21:15:11 ] [ Newcamd:34000 ] User user_local logout
[ 21:15:11 ] [ Loader ] Starting Radegast Server on port 18000
[ 21:15:11 ] [ NewCS ] Ready to GO!
[ 21:16:37 ] [ SockSrv ] New connection from 127.0.0.1 on socket 9
[ 21:18:43 ] [ Nagra ] using rsa key from config.
[ 21:20:43 ] [ Nagra ] using rsa key from config.
[ 21:22:49 ] [ Nagra ] using rsa key from config.

[airboy]

Imi explica si mie, cineva mai patit, de ce face asa? :


Pe boxa i386, cu newcs.xml initializeaza frumos cardul, dupa care, la final zice asa:

[ 21:15:11 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0
...
[ 21:15:11 ] [ Loader ] Card 1801 on port /dev/ttyUSB0 ready

Pana aici OK, daca pun cititorul cu card cu tot pe Openwrt (Router Topex), cu acelasi adaptor USB la serial:

[ 10:32:32 ] [ Loader ] Init Nagra card
[ 10:32:32 ] [ Phoenix ] Setting Parity to: ODD
[ 10:32:32 ] [ Phoenix ] Setting 1 Stop bit on node /dev/usb/tts/0
[ 10:32:32 ] [ Phoenix ] Setting Baud to standard 115200
[ 10:32:32 ] [ Loader ] Card 1800 on port /dev/ttyS0 failed
si o ia de la capat cu initializarea, informatiile legate de card ( ATR ) le afiseaza (Nagra 2, RevAC6...), dar nu-l initializeaza.
E vorba de acelasi newcs.xml, bineinteles, modificat configurl pentru portul serial.
Idei?

[airboy]

Un log curat si complet, mai sus pusesem din amintiri: Rog pareri!

[ 16:01:08 ] [ Loader ] Reader type 2 on node /dev/usb/tts/0
[ 16:01:08 ] [ Phoenix ] Opening device /dev/usb/tts/0
[ 16:01:08 ] [ Phoenix ] Setting Parity to: ODD
[ 16:01:08 ] [ Phoenix ] Setting 2 Stop bits on node /dev/usb/tts/0
[ 16:01:08 ] [ Phoenix ] Setting Baud to standard 9600
[ 16:01:09 ] [ Phoenix ] Normal RESET on node /dev/usb/tts/0
[ 16:01:11 ] [ ATR ] T=1 1etu=8.68us Guardtime:11etu CWT:139etu BWT:15371etu WWT:153600etu
[ 16:01:11 ] [ ATR ] Historical bytes: D N A S P 1 1 0 R e v A C 6
[ 16:01:11 ] [ Loader ] Init Nagra card
[ 16:01:11 ] [ Phoenix ] Setting Parity to: ODD
[ 16:01:11 ] [ Phoenix ] Setting 2 Stop bits on node /dev/usb/tts/0
[ 16:01:11 ] [ Phoenix ] Setting Baud to standard 115200
[ 16:01:11 ] [ Loader ] Card 1800 on port /dev/usb/tts/0 failed
[ 16:01:11 ] [ Loader ] Starting Newcamd Server on port 9997
[ 16:01:11 ] [ Newcamd ] Newcamd thread Server started on port 9997