RSP E2 Sfinx Edition E2 RSPv3.98 TDT VER1749

[proteus]

Ciudat este ca raspunde la ping prin telnet (KCC) si in RSP. In schimb nu pot sa descarc nici un emu - imi spune sa verific setarile de retea

Dupa cum am sugerat mai sus, ai verificat din Kathrein daca ai acces la DNS? Ce iti zice "ping www.google.com"? Incearca apoi sa dai un ping direct la un IP public si vezi ce se intampla (de ex. da un ping la Google de pe calculatorul tau ca sa vezi un IP public). Nu spun ca sigur e problema DNS, dar e una din explicatiile posibile.

[mave]

O alta metoda de a instala mgcamd mai exista in afara de download din RSP panel ?

[zildan]

Vezi ca imaginea RSP pune automat ruteru ca DNS server.
Trebuie sa setezi DNS manual din meniul e2.

[mave]

Mai nou se pare ca merge pe net - lucru verificat cu google map, download de settings si restul din RSP panel. Ce nu pot descarca (check your network setting ) este partea de EMU...

[kastilio]

Daca activez Newcs, la urmatorul reboot am urmatorul mesaj de eroare:


insmod: cannot insert '/lib/modules/usbserial.ko': Cannot allocate memory
insmod: cannot insert '/lib/modules/pl2303.ko': Cannot allocate memory
This is NewCS 1.65 - the New CardServer by the Butter-team..
Compiled on Jan 19 2009 at 17:58:37
Reading Config file from /var/keys/newcs.xml
TCP-log password is enabled, set to: NewCSpwd
TCP-log set to simple mode
level: none
type: init
output: console,tcp
logger config: level 1 type 3 output 5
Console log options: level 1 type 3
TCP log options: level 1 type 3
[ 20:00:00 ] [ Box detect ] Box type 9 (Kathrein (ST) HD Box)
[ 20:00:00 ] [ Config ] Option <blockc0> for device 0 (Phoenix Interface) not present, defaulting to NO
[ 20:00:00 ] [ Config ] Value in <ipk> for device 0 (Phoenix Interface) is INVALID, skipping...
[ 20:00:00 ] [ Config ] Value in <ucpk> for device 0 (Phoenix Interface) is INVALID, skipping...
[ 20:00:00 ] [ Config ] Pincode for device 0 (Phoenix Interface): 0000
[ 20:00:00 ] [ Config ] /dev/ttyUSB0 ECM priority: round
[ 20:00:00 ] [ EMM Cache ] Initialising dynamic Cache
[ 20:00:00 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 541
[ 20:00:00 ] [ Loader ] Starting Telnet on port 1001
[ 20:00:00 ] [ Loader ] Reader type 2 on node /dev/ttyUSB0
[ 20:00:00 ] [ Phoenix ] Opening device /dev/ttyUSB0
[ 20:00:00 ] [ Phoenix ] Could not get device /dev/ttyUSB0
[ 20:00:00 ] [ Loader ] Reset failed ...
[ 20:00:00 ] [ Loader ] Starting Newcamd Server on port 12001
[ 20:00:00 ] [ NewCS ] Ready to GO!
[ 20:00:00 ] [ Newcamd ] Newcamd thread Server started on port 12001
newcamd: main loop
[ 20:00:00 ] [ Loader ] Reader type 2 on node /dev/ttyUSB0
[ 20:00:00 ] [ Phoenix ] Opening device /dev/ttyUSB0
[ 20:00:00 ] [ Phoenix ] Could not get device /dev/ttyUSB0
[ 20:00:00 ] [ Loader ] Reset failed ...

Ar mai trebui setat ceva?

[Tez]

Se poate seta cumva luminozitatea VFD-ului ?

Ma intereseaza in special in standby.

[zildan]

Nu e inca implementat, sper sa am timp si de asta, e relativ usor de facut.

[maahes]

hi zildan

love this image

this is my 1st time i've triedd installing on usb with barry allen

i have aaf 2.0e in flash and installed ba/baboot

then sfinx

seems everything is ok untill i prees blue button i get a green screen every time and box restarts

how can i solve this?

[dbhungry]

Unfortunately the blue button TV/radio feature have been removed. The image was compiled without disabling that key. All you have to do is to take care not to use the blue key.

[bennyblitz]

Hi. Thx fot this Image.

It's possible to set the EPG to Save all Data when I shutdown my Kathrein. (Sky Germany, Cyfra+ ). Each time i start my Box, the EPG-List is empty.

[apoklyps3]

setarea lumnozitatii VFD-ului e o idee buna. ar fi ideal daca s-ar putea seta si formatul ora/data/zi in stand-by.
nu stiu daca se poate face si ca streamingul sa mearga cu recieverul in soft stand-by.

[giol]

Unfortunately the blue button TV/radio feature have been removed. The image was compiled without disabling that key. All you have to do is to take care not to use the blue key.

I am using rsp sfinx 3.98 (great work by the way) and the BLUE button works correctly , i use it every day to switch to radio .

[maahes]

giol, how is that possible when dbhungry said it wasnt compiled in this image???

what is your setup like? what do you have in flash? and what version ba/baboot you using?

[baqer]

hi can any help my to run emu manager (start/stop emu)?
if i am press this key rsp image showing menu fantastic exits, because no menufile cams.cfg

thanks

[zildan]

Check space on stick!