Tvr hd

**qwess** · 07-04-10, 12:09

Configurat pentru TVR

MultiCAS 1.62D-A03
CCcam 2.1.4
Newcs 1.6.13(Reader intern)
#MgCamd 1.34d(ptr.actualizare card)

Chmod 755/ all
in meniu AzBox:MultiCAS-Splitter & CS/Client CCcam-load & save
Reboot Azbox
in cazul in care MultiCAS nu se conecteaza la CCcam:
telnet:/EMU/OpenXCAS/MultiCAS/emu_module

Download

**promes** · 02-06-10, 20:10

am un card de la satmedia (tVR HD)si nu reusesc in azbox hd premium sa il activez .Un ajutor mi-ar fi de folos

**melcug** · 09-06-10, 00:06

Am incarcat newcs 1.6.13 si mgcamd 1.34d de la qwess, am setat pe TVR1 pe 16E, am sunat la dep. tehnic de la TVR, le-am transmis seria, dar cartela nu se activeaza.

De la mgcamd primesc mesaje de genul:

Code:

[mg0] -> ECM to newcamd 127.0.0.1:20000
[ 19:54:42 ] [ Newcamd:20000 ] Command 80 from mgcamd len 107
[ 19:54:42 ] [ Newcamd:20000 ] ECM <- mgcamd len 107
[ 19:54:42 ] [ SID ] Checking for SID 0001 for Reader 0 (upper) - SO is: 0
[ 19:54:42 ] [ Newcamd:20000 ] Accepted SID 0001 on Reader 0 (upper) from mgcamd
[ 19:54:42 ] [ Card queue /dev/scard ] ECM added, sid 1, prio 2
[ 19:54:42 ] [ Card queue /dev/scard ] Ecm run, sid 1, prio 2, queue len: 1, max len: 1
[ 19:54:42 ] Viaccess ecm: xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
[ 19:54:42 ] Viaccess ecm: xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
[ 19:54:42 ] Viaccess ecm: xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
[ 19:54:42 ] Viaccess ecm: xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
[ 19:54:42 ] Viaccess ecm: xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
[ 19:54:42 ] Viaccess ecm: xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
[ 19:54:42 ] Viaccess ecm: xx xx xx xx xx xx xx xx xx xx 
[ 19:54:42 ] [ Viaccess ] provider 025900
[ 19:54:42 ] [ Viaccess ] Sending to Card: CA88000862
[ 19:54:42 ] [ azbox ] Delay is 8us
[ 19:54:42 ] write: CA 88 00 08 62
[ 19:54:42 ] [ azbox ] Timeout is 1000308us
[ 19:54:42 ] read: 88
[ 19:54:42 ] [ azbox ] Delay is 8us
[ 19:54:42 ] write: xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
[ 19:54:42 ] write: xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
[ 19:54:42 ] write: xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
[ 19:54:42 ] write: xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
[ 19:54:42 ] write: xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
[ 19:54:42 ] write: xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
[ 19:54:42 ] write: xx xx
[ 19:54:42 ] [ azbox ] Timeout is 1000308us
[ 19:54:42 ] read: 90 08
[ 19:54:42 ] [ Viaccess ] Status Word from Card: 9008
[ 19:54:42 ] [ 0500 ] Card ECM took: 0s 288729us
[ 19:54:42 ] [ Newcamd ] ECM -> mgcamd (NOT OK)
[ 19:54:42 ] [ SID ] Updating SID 0001 for Reader 0 (upper) bad - SO is: 0
[ 19:54:42 ] [ ECM Cache ] Adding dynamic Cache entry at 4
[ 19:54:42 ] [ ECM Cache ] Hits 158 Total 191
[mg0] newcamd route 127.0.0.1:20000 cant decode (300ms)

dar parca si ceva de genul EMM cache din cand in cand.

Cat timp pot incerca activarea cartelei dupa ce le-am transmis seria?
Aveti o configuratie dedicata activarii, functionala, pe care sa o impartasiti comunitatii de posesori de receptoare AZBox ... fara E2?

Multumesc anticipat.

**qwess** · 09-06-10, 10:52

incearca si acest config: modifica parametri "user")

Code:

<?xml version="1.0"?>

<newCSconfig>
    <readers name="AZBOX">
        <!-- <device>
            <name>Phoenix</name>
            <type>phoenix</type>
            <mhz>357</mhz>
            <node>/dev/ttyUSB0</node>
            <parity>odd</parity>
            <reset>normal</reset>
            <export>Yes</export>
            <enabled>Yes</enabled>
            <blocksa>No</blocksa>
            <blockua>No</blockua>
            <blockga>No</blockga>
            <boxkey></boxkey>
            <PTShandshake>Yes</PTShandshake>
            <carddetect>Yes</carddetect>
            <newcamd_port>34001</newcamd_port>
            <autosid>Yes</autosid>
            <Seca-PPV>No</Seca-PPV>
            <pincode></pincode>
            <priority>round</priority>
        </device> -->
    <!--     <device>
            <name>Smargo</name>
            <type>smartreader+</type>
            <mhz>357</mhz>
            <node>/dev/ttyUSB0</node>
            <parity>odd</parity>
            <reset>normal</reset>
            <export>Yes</export>
            <enabled>Yes</enabled>
            <blocksa>No</blocksa>
            <blockua>No</blockua>
            <blockga>No</blockga>
            <blockC0>yes</blockC0>
            <boxkey></boxkey>
            <PTShandshake>No</PTShandshake>
            <carddetect>Yes</carddetect>
            <newcamd_port>34002</newcamd_port>
            <autosid>Yes</autosid>
                <sid>
                    <allow>
                    <id></id>
                    <id></id>
                    <id></id>
                    <id></id>
                    </allow>
                    <deny>
                    </deny>
                </sid>
            <Seca-PPV>No</Seca-PPV>
            <pincode></pincode>
            <priority>round</priority>
        </device> -->
         <device>
            <name>upper</name>
            <type>azbox</type>
            <mhz>357</mhz> 
            <node>/dev/scard</node>
            <parity>odd</parity>
            <reset>normal</reset>
            <export>Yes</export>
            <enabled>Yes</enabled>
            <blocksa>No</blocksa>
            <blockua>No</blockua>
            <blockga>No</blockga>
            <blockC0>yes</blockC0>
            <crypto-special>No</crypto-special>
            <PTShandshake>No</PTShandshake>
            <carddetect>yes</carddetect>
            <newcamd_port>34000</newcamd_port>
            <autosid>Yes</autosid>
                <sid>
                    <allow>
                    <id>0001</id>
                    <id>0002</id>
                    <id>000f</id>
                    </allow>
                    <deny>
                    </deny>
                </sid>
            <Seca-PPV>no</Seca-PPV>
            <pincode>0000</pincode> # TVRCARD_VIA2.6
            <priority>round</priority>
        </device>
    </readers>
    <cache>
            <emm>20</emm>
            <ecm>-1</ecm>
    </cache>
    <httpd>
        <server><!-- http://ip.azbox:8080  -->
            <port>8080</port>
            <enabled>yes</enabled>
        </server>
        <user>
            <name>newcs</name>
            <password>newcs</password>
            <accesslevel>admin</accesslevel>
        </user>
    </httpd>
    <debug>
            <password>NewCSpwd</password>
             <mode>simple</mode>
             <darint39>sintoi51</darint39>
            <level>normal</level>
            <type>all</type>
            <output>console,tcp</output>
            <logfile>/DATA/hdb1/download/newcs.txt</logfile>
            <console_options>normal,init</console_options>
            <file_options>init,ecm</file_options>
            <udp_host></udp_host>
            <udp_port>9001</udp_port>
            <udp_options>normal,init</udp_options>
            <tcp_host></tcp_host>
            <tcp_port>1001</tcp_port>
            <tcp_password>azerty</tcp_password>
            <tcp_options>normal,init</tcp_options>
    </debug>
    <newcamdserver>
                <enabled>Yes</enabled>
                <name>newcs</name>
                <deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
            <user><!-- newcamd.list(mgcamd)     CWS = 127.0.0.1 34000 mgcamd mgcamd 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan newcs
                                                CWS_INCOMING_PORT = 12000   -->
                <status>access</status>
                <name>mgcamd</name>
                <password>mgcamd</password>
                <hostname>127.0.0.1</hostname>
                <port></port>
                <au>on</au>
                <spider>No</spider>
                <allow>upper</allow>
                <sidoverride>off</sidoverride>
                <rate>2</rate>
                <cardlevel>1</cardlevel>
            </user>
            <user><!-- newcamd.cfg(multicas)   N: 127.0.0.1 34000 mgcamd mgcamd 01 02 03 04 05 06 07 08 09 10 11 12 13 14
                    editeaza .\EMU\PLUGINS\MultiCAS\splitterdata.txt: CCCAM_NEWCAMD_WORK_TOGETHER = 1  -->
                <status>access</status>
                <name>multicas</name>
                <password>multicas</password>
                <hostname>127.0.0.1</hostname>
                <port></port>
                <au>on</au>
                <spider>No</spider>
                <sidoverride>off</sidoverride>
                <allow>upper</allow>
                <rate>2</rate>
                <cardlevel>1</cardlevel>
            </user>
            <user><!-- N: "IP_azbox" 34000 mgcamd mgcamd 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256 #TVR 16°E -->
                <status>access</status>
                <name>cccam</name>
                <password>cccam</password>
                <hostname>enteryourcccamIP</hostname>
                <port>34000</port>
                <au>on</au>
                <spider>No</spider>
                <sidoverride>on</sidoverride>
                <allow>upper</allow>
                <rate>2</rate>
                <cardlevel>1</cardlevel>
            </user>  -->
            <!-- <user>
                <status>access</status>
                <name></name>
                <password></password>
                <hostname></hostname>
                <port></port>
                <au>on</au>
                <spider>No</spider>
                <sidoverride>on</sidoverride>
                <allow>upper</allow>
                <rate>2</rate>
            </user>  -->
            <!-- <user>
                <status>access</status>
                <name></name>
                <password></password>
                <hostname></hostname>
                <port></port>
                <au>on</au>
                <spider>No</spider>
                <sidoverride>on</sidoverride>
                <allow>upper</allow>
                <rate>2</rate>
            </user> -->
            <!--user>
                <status>access</status>
                <name></name>
                <password></password>
                <hostname></hostname>
                <port></port>
                <au>on</au>
                <spider>No</spider>
                <sidoverride>on</sidoverride>
                <allow>Upper</allow>
                <rate>2</rate>
            </user>  -->
            <!--user>
                <name></name>
                <password></password>
                <hostname></hostname>
                <port></port>
                <au>on</au>
                <sidoverride>off</sidoverride>
                <spider>yes</spider>  
                <rate>0</rate>
                <allow>upper</allow>
            </user>  -->
    </newcamdserver>
<!--    <chameleon2>
                <server>
                        <port>1234</port>
                        <enabled>yes</enabled>
                        <realm>myShares.AZ</realm>
                </server>
                <peer>  
                        <hostname>192.168.2.5</hostname>
                        <port>2345</port>
                        <name>topex</name>
                        <password>topex</password>
                        <realm>myShares.Tp</realm>
                </peer>
                <user>
                        <name>azbox</name>
                        <password>azbox</password>
                        <realm>myShares.AZ</realm>
                </user>
        <virtualcards>
            <builtin>no</builtin>
            <vc>
                <caid>0000</caid>
                <provider>0000000</provider>
            </vc>
            <dvc>
                <caid>0001</caid>
                <provider>0000000</provider>
            </dvc>
        </virtualcards>
        </chameleon2>  -->
</newCSconfig>

killall newcs
killall mgcamd
start 2 sesiuni telnet:

in sesiune1:
/EMU/OpenXCAS/newcs/newcs

in sesiune2:
/EMU/OpenXCAS/mgcamd/mgcamd

joacate la parity mode cu : "even" "odd" "none" , dupa modificari omori/pornesti procesele din nou.
sterge canalele/rescaneaza TP cu frecventele TVR(omite daca sunt actualizate)
-vezi log newcs
baFTA

**melcug** · 09-06-10, 21:02

Desi numai aveam nici o speranta, de dimineata, inainte sa plec cu treaba, am pornit AZBox-ul si l-am setat pe TVR1. Pana acum doua minute (19:52) ramasese pe TVR1, l-am resetat si apoi l-am pus pe TVR HD fara speranta ca se va reactiva cartela. Mentionez ca nu am facut nici o modificare de soft sau de configuratie fata de cele din ziua trecuta.
Si ... minune (m-am si speriat cand am auzit sunetul de la TV deoarece era cam liniste in casa). S-a luminat.

Inca nu am intrat in el (telnet) sa vad pana cand este facuta activarea. Sunt prea bucuros. Trebuie sa fac loc pentru bere in frigider pentru ca mai sunt doua zile pana la inceperea Campionatelor Mondiale din Africa de Sud.

Salutare si la mai mare!

PS. Imi pierdusem speranta sa mai vad ceva de la CM in HD pentru ca magarii de la RDS au codat programele HD pe DVB-C cu doar cateva zile mai devreme ... tactica de marketing sa mai vanda si ei "jdemii" de decodoare inainte de 11 iunie.

crisz · 10-06-10, 11:32

Salutare, ma bag si eu in seama

Sa inteleg ca merge fara modificari configuratia lui qwess :

NewCS/CCcam/MultiCAS
Configurat pentru TVR

MultiCAS 1.62D-A03
CCcam 2.1.4
Newcs 1.6.13(Reader intern)
#MgCamd 1.34d(ptr.actualizare card)

Chmod 755/ all
in meniu AzBox:MultiCAS-Splitter & CS/Client CCcam-load & save
Reboot Azbox
in cazul in care MultiCAS nu se conecteaza la CCcam:
telnet:/EMU/OpenXCAS/MultiCAS/emu_module

Nu de alta dar am si eu aceeasi problema AZbox Hd si card TVR neactivat pina acum

Numai bine

**melcug** · 10-06-10, 15:57

Din arhiva trimisa de quess te intereseaza doar newcs si mgcamd din directorul OpenXCAS. Dupa copiere, editezi module.seq in care singurele module fara # sa fie newcs si mgcamd, chmod 755 pe executabilele newcs si mgcamd si apoi restart. Manipularea fisierelor o poti face cu MaZ 3.0.

Dai telefon la dep. tehnic de la TVR si ceri reactivarea cartelei si le transmiti seria.

Seteaza pe TVR1, dar poti si pe TVR HD la 16E - asa a mers la mine (rescaneaza TP de la 11557 V, 29950, 3/4).

Salutare si succes!

PS. La mine activarea este pana pe 26.08.2010.

**qwess** · 10-06-10, 22:22

Originally Posted by crisz

.....

Sa inteleg ca merge fara modificari configuratia lui qwess :

NewCS/CCcam/MultiCAS
Configurat pentru TVR
.....

Modifici atributele dupa copiere, schimbi "emu_module"(il faci exec cu 755)cu cel de la ultima versiune de multicas, editezi/actualizezi "openxcas.conf":

Code:

[module]
name = MultiCAS
daemon = emu_module
version = 1.62D-B11
INFO = /tmp/ccc_ecm.info
REFRESH = 2

activezi pluginurile dupa cum vrei.
pentru activare incepi cu mgcamd+newcs
dupa activarea card. activezi multicas-dez.mgcamd
sau poti rula multicas+ccc+newcs
--sunt deja cofigurate--
actualizezi .xml:

Code:

<?xml version="1.0"?>
<!--  config pentru newcs 1.6.13 -- cititor intern AzboxHD
mgcamd+newcs; multicas+newcs; cccam+newcs(hop1); multicas+multicas+newcs  -->
<newCSconfig>
    <readers name="AZBOX">
         <device>
            <name>upper</name>
            <type>azbox</type>
            <mhz>357</mhz> 
            <node>/dev/scard</node>
            <parity>even</parity>
            <reset>normal</reset>
            <export>Yes</export>
            <enabled>Yes</enabled>
            <blocksa>No</blocksa>
            <blockua>No</blockua>
            <blockga>No</blockga>
            <blockC0>yes</blockC0>
            <crypto-special>No</crypto-special>
            <PTShandshake>No</PTShandshake>
            <carddetect>yes</carddetect>
            <newcamd_port>20000</newcamd_port>
            <autosid>Yes</autosid>
                <sid>
                    <allow>
                    <id>0001</id>
                    <id>0002</id>
                    <id>000f</id>
                    </allow>
                    <deny>
                    </deny>
                </sid>
            <Seca-PPV>no</Seca-PPV>
            <pincode>0000</pincode> # TVRCARD_VIA2.6
            <priority>round</priority>
        </device>
    </readers>
    <cache>
            <emm>20</emm>
            <ecm>-1</ecm>
    </cache>
    <httpd>
        <server><!-- http://ip.azbox:8080  -->
            <port>8080</port>
            <enabled>yes</enabled>
        </server>
        <user>
            <name>newcs</name>
            <password>newcs</password>
            <accesslevel>admin</accesslevel>
        </user>
    </httpd>
    <debug>
            <password>NewCSpwd</password>
             <mode>simple</mode>
             <darint39>sintoi51</darint39>
            <level>normal</level>
            <type>all</type>
            <output>console,tcp</output>
            <logfile>/DATA/hdb1/download/newcs.txt</logfile>
            <console_options>normal,init</console_options>
            <file_options>init,ecm</file_options>
            <udp_host></udp_host>
            <udp_port>9001</udp_port>
            <udp_options>normal,init</udp_options>
            <tcp_host></tcp_host>
            <tcp_port>1001</tcp_port>
            <tcp_password>azerty</tcp_password>
            <tcp_options>normal,init</tcp_options>
    </debug>
    <newcamdserver>
                <enabled>Yes</enabled>
                <name>newcs</name>
                <deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
            <user>
                <status>access</status>
                <name>mgcamd</name>
                <password>mgcamd</password>
                <hostname>127.0.0.1</hostname>
                <port>20000</port>
                <au>on</au>
                <spider>No</spider>
                <allow>upper</allow>
                <sidoverride>off</sidoverride>
                <rate>2</rate>
                <cardlevel></cardlevel>
            </user>
            <user>
                <status>access</status>
                <name>multicas</name>
                <password>multicas</password>
                <hostname>127.0.0.1</hostname>
                <port>20000</port>
                <au>on</au>
                <spider>No</spider>
                <allow>upper</allow>
                <sidoverride>off</sidoverride>
                <rate>2</rate>
                <cardlevel></cardlevel>
            </user>
            <user>
                <status>access</status>
                <name>cccam</name>
                <password>cccam</password>
                <hostname>127.0.0.1</hostname>
                <port>20000</port>
                <au>on</au>
                <spider>No</spider>
                <allow>upper</allow>
                <sidoverride>off</sidoverride>
                <rate>2</rate>
                <cardlevel></cardlevel>
            </user>
    </newcamdserver>
</newCSconfig>

pentru smargo folosesti configul din postul #44(+ modificarile de rigoare) cu newcs 1.67.

Thread: Tvr hd

Thread Tools

Display

Hybrid View

NewCS/CCcam/MultiCAS

card tvr hd

Tvr hd

Tvr hd

Salut

Tvr hd

Posting Permissions