webcam on dd-wrt?

[goldsat]

sau asa :

root@DD-WRT:/dev# /opt/var/bin/./w3camd -v -p 8999 -s 640x480 -h 192.168.10.1 -d
/dev/video
main thread pid = 1574
bind 192.168.10.1:8999 to file descriptor 3
incoming connection..
serving connection, (childs=1)
w3camd.c: no. of childs changed: childs=1
/dev/video: No such file or directory
w3camd.c: can't init v4l
server_thread() state=0

[zappa]

Cine poate sa puna pe upload w3camd compilat ptr router?
Am gasit doar versiunea necompilata si nu am cum sa o compilez.
Multumesc.

[prodigy]

ia de mai jos, atasat

[zappa]

sau asa :

root@DD-WRT:/dev# /opt/var/bin/./w3camd -v -p 8999 -s 640x480 -h 192.168.10.1 -d
/dev/video
main thread pid = 1574
bind 192.168.10.1:8999 to file descriptor 3
incoming connection..
serving connection, (childs=1)
w3camd.c: no. of childs changed: childs=1
/dev/video: No such file or directory
w3camd.c: can't init v4l
server_thread() state=0

Se pare ca am ajuns in acelasi punct ca si tine. Ai rezolvat? Posibil sa lipseasca niste librarii.

@prodigy - multumesc.

[prodigy]

In primul rand, la -d ai scris gresit , device-u de camera de obicei se incarca in /dev/v4l/video0 din cite imi aduc eu aminte...deci comanda ar fii:

root@DD-WRT:/dev# /opt/var/bin/./w3camd -v -p 8999 -s 640x480 -h 192.168.10.1 -d
/dev/v4l/video0

[zappa]

Scuze....am dat replay si n-am verificat comanda. Device-ul de camera se incarca in /dev/v4l/video0 sau in /dev/video0 in cazul in care s-a facut un link catre el ( ln -s /dev/v4l/video0 /dev/video0 ). Cand accesez http://192.168.1.1:8999 vad ca se aprinde ledul de la webcam....imi apare eroarea in putty si apoi se stinge (ledul) fara sa vad nimic in pagina de web.

[fery21]

Eu am asa :

root@OpenWrt:~# lsusb
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
Bus 001 Device 002: ID 0781:5151 SanDisk Corp. Cruzer Micro 256/512MB Flash Driv                    e
Bus 001 Device 003: ID 03eb:0902 Atmel Corp.
Bus 001 Device 004: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port
Bus 001 Device 005: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port
Bus 001 Device 007: ID 0ac8:0323 Z-Star Microelectronics Corp. Luxya WC-1200 USB                     2.0 Webcam

mai departe nu ma descurc am citit

opkg update
opkg install kmod-videodev (root@OpenWrt:~# opkg install kmod-videodev
Collected errors:
 * Cannot find package kmod-videodev.)
apoi se face insmod la videodev.o
se verifica sa fie incarcata prin comanda lsmod
apoi se face insmod la spca5xx.o si la lsmod arata asa

root@OpenWrt:~# /opt/var/bin/./w3camd -v -p 8999 -s 640x480 -h 192.168.10.1 -d
/opt/var/bin/./w3camd: option requires an argument -- d
Usage: /opt/var/bin/./w3camd [-v] [-p #] [-h host] [-s #x#] [-m #] [-i #] [-d device]
root@OpenWrt:~# dmesg | grep usb
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb.c: new USB bus registered, assigned bus number 1
usb.c: new USB bus registered, assigned bus number 2
usb.c: USB device 2 (vend/prod 0x781/0x5151) is not claimed by any active driver.
usb.c: registered new driver usb-storage
usb.c: USB device 4 (vend/prod 0x67b/0x2303) is not claimed by any active driver.
usb.c: USB device 5 (vend/prod 0x67b/0x2303) is not claimed by any active driver.
usb.c: USB device not accepting new address=6 (error=-145)
usb.c: USB device not accepting new address=7 (error=-145)
usb.c: registered new driver serial
usbserial.c: USB Serial support registered for Generic
usbserial.c: USB Serial Driver core v1.4
usbserial.c: USB Serial support registered for PL-2303
usbserial.c: PL-2303 converter detected
usbserial.c: PL-2303 converter now attached to ttyUSB0 (or usb/tts/0 for devfs)

[zappa]

Pai nu ai instalat "kmod-videodev". Probabil nu se numeste asa pachetul. Incearca sa il instalezi cu ajutorul interfetei web. Nu ai specificat ce firmware ai ca sa iti spun exact unde sa cauti.

[fery21]

OpenWrt Firmware
Kamikaze (r16206)
Load: 0.77 0.35 0.13
Hostname: OpenWrt

Am instalat kmod-video-core