Server cccam pe router wl500g ...

**qwess** · 04-06-10, 16:17

Salut,
Ma tot chinui sa bag cardul de la tvr prin newcs1.67/cccam2.1.1 pe Kamikaze si nu reusesc deloc....

Code:

This is NewCS 1.67 RC1 [Build: 95] - the New CardServer by the Butter-team..
Compiled on Jul 14 2009 at 11:58:28
Reading Config file from /opt/var/etc/newcs.xml
TCP-log password is enabled, set to: NewCSpwd
level: internal
type: all
output: console,tcp
logger config: level 16777215 type 255 output 5
Console log options: level 16777215 type 255
TCP log options: level 1 type 255
[ 14:17:15 ] [ Box detect ] Box type 12 (OpenWRT Router)
[ 14:17:15 ] [ Config ] Pincode for device 0 (phoenix): 0000
[ 14:17:15 ] [ SID ] Adding SID FFF720 on Reader 0 (phoenix) - SO is: 0 [Allow]
[ 14:17:15 ] [ SID ] Adding SID 25900 on Reader 0 (phoenix) - SO is: 0 [Allow]
[ 14:17:15 ] [ SID ] Adding SID 25910 on Reader 0 (phoenix) - SO is: 0 [Allow]
[ 14:17:15 ] [ SID ] Adding SID 0000 on Reader 0 (phoenix) - SO is: 0 [Allow]
[ 14:17:15 ] [ Config ] /dev/usb/tts/0 ECM priority: round
[ 14:17:15 ] [ Newcamd ] Server name : newcs
[ 14:17:15 ] [ Newcamd ] Des key     : 0102030405060708091011121314
[ 14:17:15 ] [ Config ] Option <readers> not present for User: topex, NO reader control enabled
[ 14:17:15 ] [ Newcamd ] User 2: topex, Pass: topex, Host 192.168.2.5, Port: 34000, Au: On, Spider allowed: No, Sidoverride: No, level: 0
[ 14:17:15 ] [ httpd ] httpd-user: newcs, password: newcs, accesslevel: admin
[ 14:17:15 ] [ EMM Cache ] Initialising dynamic Cache
[ 14:17:15 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 2128
[ 14:17:15 ] Calibrating delay loops
[ 14:17:15 ] usleep(5) takes: 0 s 25 us
[ 14:17:15 ] usleep(10) takes: 0 s 29 us
[ 14:17:15 ] usleep(100) takes: 0 s 117 us
[ 14:17:15 ] usleep(500) takes: 0 s 516 us
[ 14:17:15 ] Allocation memory for 200 regular users
[ 14:17:15 ] [ Loader ] Starting Telnet on port 1001
[ 14:17:15 ] [ SockSrv ] Server thread started
[ 14:17:15 ] [ Loader ] Started HTTP-server on port: 8080
[ 14:17:15 ] [ Loader ] Reader type 2 on node /dev/usb/tts/0
[ 14:17:15 ] [ CardMan ] Reseting reader parameters
[ 14:17:15 ] [ Phoenix ] Opening device /dev/usb/tts/0
[ 14:17:16 ] [ Phoenix ] Setting Parity to: ODD
[ 14:17:16 ] [ Phoenix ] Setting 2 Stop bits on node /dev/usb/tts/0
[ 14:17:16 ] [ Phoenix ] Setting Baud to standard 9600
[ 14:17:16 ] [ Phoenix ] Normal RESET on node /dev/usb/tts/0
[ 14:17:18 ] [ Serial ] Read on fd 8 (len=12 timeout=5300ms)
[ 14:17:18 ] Phoenix_read:
0000: 03 11 e7 ff ff bc d7 ff 7c e9 f6 ff              ........|...

[ 14:17:18 ] [ CardMan ] Atr header is 3F 77 [INVERSE]
[ 14:17:18 ] [ ATR ] Data:
0000: 3f 77 18 00 00 c2 14 00 c1 68 90 00 00 00 00 00  ?w.......h......
0010: 00                                               .

[ 14:17:18 ] [ ATR ] T=0  1etu=8.68us  Guardtime:12etu  WWT:115200etu
[ 14:17:18 ] [ ATR ] Historical bytes: [C2] [14] [00] [C1] h [90] [00]
[ 14:17:18 ] [ Loader ] Init Viaccess card
[ 14:17:18 ] Card reader locked for reader phoenix [/dev/usb/tts/0]
[ 14:17:18 ] [ Phoenix ] Setting Parity to: ODD
[ 14:17:18 ] [ Phoenix ] Setting 2 Stop bits on node /dev/usb/tts/0
[ 14:17:18 ] [ Phoenix ] Setting Baud to standard 9600
[ 14:17:18 ] [ Viaccess ] Sending to Card: CAA4000000
[ 14:17:18 ] Phoenix_write:
0000: ca a4 00 00 00                                   .....

[ 14:17:18 ] [ Serial ] Write on fd 8 (len=5)
[ 14:17:18 ] [ Serial ] Read on fd 8 (len=5 timeout=1500ms)
[ 14:17:18 ] [ Serial ] Read on fd 8 (len=1 timeout=1300ms)
[ 14:17:18 ] Phoenix_read:
0000: 14                                               .

[ 14:17:18 ] [ Serial ] Read on fd 8 (len=2 timeout=1300ms)
[ 14:17:18 ] Phoenix_read:
0000: 00 c1                                            ..

[ 14:17:18 ] [ Viaccess ] Status Word from Card: 00C1
[ 14:17:18 ] Card reader unlocked for reader phoenix [/dev/usb/tts/0]
[ 14:17:18 ] [ Loader ] Card 0500 on port /dev/usb/tts/0 failed
[ 14:17:18 ] [ Card queue /dev/usb/tts/0 ] Starting...
[ 14:17:18 ] [ Loader ] Starting Newcamd Server on port 34000
[ 14:17:18 ] [ Newcamd ] Newcamd thread Server started on port 34000
newcamd: main loop
[ 14:17:18 ] [ NewCS ] Ready to GO! :)
root@OpenWrt:~# [ 14:17:22 ] [ Newcamd ] new connection from 192.168.2.5 on socket 10
[ 14:17:22 ] [ Newcamd:34000 ] Connection from 192.168.2.5
[ 14:17:22 ] [ Newcamd:34000 ] User topex logged in, client: CCcam
[ 14:17:22 ] [ Newcamd:34000 ] Connection topex to not-ready server!

si aici newcs.xml:

Code:

<newcsconfig>
    <readers name="Standard Phoenix on PC">
        <globals>
            <listening-ip>127.0.0.1</listening-ip>
        </globals> 
        <device>
            <name>phoenix</name>
            <type>phoenix</type>
            <mhz>357</mhz>
            <baud>9600</baud>
            <node>/dev/usb/tts/0</node>
            <parity>odd</parity>
            <reset>normal</reset>
            <export>yes</export>
            <enabled>yes</enabled>
            <blocksa>no</blocksa>
            <blockua>no</blockua>
            <blockga>no</blockga>
             <blockc0>yes</blockc0>
            <crypto-special>no</crypto-special>
            <PTShandshake>no</PTShandshake>
            <carddetect>yes</carddetect>
            <newcamd_port>34000</newcamd_port>
            <Seca-PPV>no</Seca-PPV>
            <pincode>0000</pincode>
            <protectedsid>
            <id></id>
            </protectedsid>
            <priority>round</priority>
            <autosid>yes</autosid>
            <sid>
            <allow>
            <id>fff720</id>
            <id>25900</id>
            <id>25910</id>
            </allow>
            </sid>
        </device>
       </readers>
        <radegastserver>
            <enabled>No</enabled>
            <port>0</port>
            <allow>all</allow>
        </radegastserver>
    <cache>
            <emm>20</emm>
            <ecm>-1</ecm>
    </cache>
       <httpd>
        <server>
            <port>8080</port>
            <enabled>yes</enabled>
        </server>
        <user>
            <name>newcs</name>
            <password>newcs</password>
            <accesslevel>admin</accesslevel>
        </user>
    </httpd>
    <debug>
            <password>NewCSpwd</password>
            <mode>simple</mode>
            <level>internal</level>
            <type>all</type>
            <output>console,tcp</output>
            <tcp_host>192.168.2.5</tcp_host>
            <tcp_port>1001</tcp_port>
            <tcp_options>normal,init</tcp_options>
    </debug>
       <newcamdserver>
            <enabled>Yes</enabled>
            <name>newcs</name>
            <deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
                <user>
            <status>access</status>
            <name>topex</name>
            <password>topex</password>
            <hostname>127.0.0.1</hostname>
            <port>34000</port>
            <au>on</au>
            <spider>off</spider>
            <sidoverride>off</sidoverride>
            <rate>3</rate>
        </user>   
    </newcamdserver>
</newcsconfig>

cu parity EVEN imi da cu unknow card, pe ODD imi vede cardul ca fiind Viacces dar doar atat, nu reusesc sa ma conectez cu cccam din router; mgcamd, multicas din receiver la newcs.

am schimbat aproape toti parametrii, dar nimic....sa inteleg ca newcs nu citeste bine cart.tvr pe acest kernel?
pentru cartela tvr am mai multe sanse cu oscam?
Merci,

**valerica** · 05-06-10, 09:33

Qwess , libs pentru smargo si config acestuia sunt OK ? Log-ul newcs arata ca nu ....
Ruleaza newcs 1.67 in azbox si conecteaza routerul/cccam la el . La mine merge perfect aceasta config. cu 1 hub si 2 cartele ; o mica deosebire : routerul e fritzbox cu patch onestep .

**neutrin** · 05-06-10, 12:20

Sunt chiar impresionat de Asus WL-500g Premium v2. Cred că a fost cea mai bună investiţie din ultimii 2 ani. Rulez in momentul ăsta pe el 24 h/7 zile un server cccam, un server mbox, client de torrent (rtorrent, cu un hard disc conectat la router pe USB şi cu screen ca să-l ţină in background) şi unrar (dezarhivez nişte filme luate cu rtorrent pt a le transfera pe IPBox, din nou cu screen), mă uit la S** Ci**ma 1 HD prin cccam şi iată ce zice top (am şters ceea ce nu trebuie să se vadă

):

Code:

Mem: 27692K used, 616K free, 0K shrd, 1192K buff, 19452K cached
CPU:  20% usr  78% sys   0% nice   1% idle   0% io   0% irq   0% softirq
Load average: 4.25 4.12 3.66
  PID  PPID USER     STAT   VSZ %MEM %CPU COMMAND
 3907  3906 root     R     5876  21%  21% unrar x /mnt/data/**********
   43     1 root     RW       0   0%   5% [usb-storage-0]
 1027  1014 root     R     116m 422%   2% rtorrent -n -O import=/mnt/home/root/
 1072  1067 root     S     2964  10%   2% /opt/mbox/mbox-2.4.openwrt /opt/mbox/
 1089  1045 root     S    30680 108%   1% /opt/cccam/CCcam.mipsel -fnvq -C /opt
 4296  4005 root     R     1672   6%   1% top 
   10     1 root     SW       0   0%   1% [mtdblockd]
    4     1 root     SW       0   0%   1% [kswapd]
  660     1 root     S     1512   5%   1% wland 
  136     1 root     S     1512   5%   1% resetbutton 
 1086  1045 root     S    30680 108%   0% /opt/cccam/CCcam.mipsel -fnvq -C /opt
 1005     1 root     SW       0   0%   0% [kjournald]
 1096  1045 root     S    30680 108%   0% /opt/cccam/CCcam.mipsel -fnvq -C /opt
 4003   271 root     S     1936   7%   0% dropbear -b /tmp/loginprompt -r /tmp/
23187     1 root     S     1136   4%   0% dnsmasq --conf-file=/tmp/dnsmasq.conf
    3     1 root     RWN      0   0%   0% [ksoftirqd_CPU0]
 1085  1045 root     S    30680 108%   0% /opt/cccam/CCcam.mipsel -fnvq -C /opt
 1044     1 root     S    30680 108%   0% /opt/cccam/CCcam.mipsel -fnvq -C /opt
 2104  1045 root     S    30680 108%   0% /opt/cccam/CCcam.mipsel -fnvq -C /opt
 1046  1045 root     S    30680 108%   0% /opt/cccam/CCcam.mipsel -fnvq -C /opt

Swap utilization:

Code:

root@ASUS:~# cat /proc/swaps 
Filename            Type        Size    Used    Priority
/dev/scsi/host0/bus0/target0/lun0/part2 partition    257032    13024    -1

Chiar cu download la viteză maximă şi nu-mi afectează card sharingul! Am avut uptime peste 30 de zile cu el (acum vreo 10 zile a picat curentul, altfel era mai mult). Sunt impresionat! Şi am mai găsit un avantaj: dacă mi se blochează IPBox-ul (la cit il butonez, săracul, i se intimplă cam o dată la 2-3 zile), cccam şi mbox rămin online.

**qwess** · 05-06-10, 18:27

Originally Posted by valerica

Qwess , libs pentru smargo si config acestuia sunt OK ? Log-ul newcs arata ca nu ....
Ruleaza newcs 1.67 in azbox si conecteaza routerul/cccam la el . La mine merge perfect aceasta config. cu 1 hub si 2 cartele ; o mica deosebire : routerul e fritzbox cu patch onestep .

Asa am rulat pana acum, newcs 1.6.13 in azbox(cititor intern) si cccam 2.1.1 in router, ieri am trecut pe 1.67 in azbox prin smargo, testand cu succes chameleon2 intre cele 2newcs(router-azbox).
Vroiam sa trec atat ccc cat si readerul pe router.

Thread: Server cccam pe router wl500g ...

Thread Tools

Display

Hybrid View

Posting Permissions