Server cccam pe router wl500g ...

[resofty]

Enabling 3G/UMTS
http://josefsson.org/openwrt/dongle.html
Ce modem iti da la RDS?

[mark21]

ZTE Corporation MF 110

http://wwwen.zte.com.cn/en/products/...me=ZTE%20MF110

[stargate]

am pus newcs+cccam pe router ... cccam ruleaza , newcs apare la procese dar linia pe care o dau pentru cccam este offline .

cand pornesc newcs din putty imi arata asa :

root@OpenWrt:~# /opt/var/bin/./start_newcs
Reading Config file from /opt/var/etc/newcs.xml
[ 12:16:16 ] [ Box detect ] Box type 1
[ 12:16:16 ] [ Config ] Auto readers config enabled
[ 12:16:16 ] [ Config ] Devicetype in config must be wrong, defaulting to Phoeni x..
[ 12:16:16 ] [ Config ] Devicetype in config must be wrong, defaulting to Phoeni x..
[ 12:16:16 ] [ Config ] Option <cache> not present, defaulting EMM: 20, ECM: Dyn amic
[ NewCS ] Process ID is: 880
[ 12:16:16 ] [ NewCS ] Ready to GO!

setarile in newcs.xml sunt astea :

<?xml version="1.0"?>
<!-- This file was created by NewCS & CCcam Config Creator Written By B16MCC -->

<newcsconfig>
<readers name="phoenix">
<device>
<name>phoenix</name>
<type>phoenix</type>
<mhz>368</mhz>
<node>/dev/ttyUSB0</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<blockC0>Yes</blockC0>
<carddetect>no</carddetect>
<newcamd_port>15000</newcamd_port>
<autosid>Yes</autosid>
<pincode>1234</pincode>
<priority>round</priority>
</device>
</readers>
<radegastserver>
<enabled>no</enabled>
<port>10001</port>
<allow>
<hostname>localhost</hostname>
</allow>
</radegastserver>

<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>

<httpd>
<server>
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>
<name>admin</user>
<password>admin</password>
<accesslevel>admin</accesslevel>
</user>
</httpd>

<debug>
<password>NewCSpwd</password>
<mode>simple</mode>
<level>internal</level>
<type>all</type>
<output>console,tcp</output>
<tcp_port>1001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>

<newcamdserver>
<enabled>yes</enabled>
<name>NewCS</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>CCcam</name>
<password>CCcam</password>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>no</spider>
<cardlevel>1</cardlevel>
</user>
</newcamdserver>
</newcsconfig>

linia pe care o dau pentru cccam este :

N: 127.0.0.1 15000 CCcam CCcam 01 02 03 04 05 06 07 08 09 10 11 12 13 14

va rog daca ma poate ajuta cineva cu un sfat ... pun o vorba buna la Mos Craciun

[stargate]

cu ajutorul lui @resofty s-au mai rezolvat din probleme , la pornire din putty a newcs am acest mesaj

root@OpenWrt:~# /opt/var/bin/./start_newcs
This is NewCS 1.67 RC1 [Build: 95] - the New CardServer by the Butter-team..
Compiled on Jul 14 2009 at 11:58:28
Reading Config file from /opt/var/etc/newcs.xml
[ 09:20:03 ] [ Box detect ] Box type 12 (OpenWRT Router)
[ 09:20:03 ] [ Config ] /dev/usb/tts/0 ECM priority: round
[ 09:20:03 ] [ httpd ] httpd-user: admin, password: , accesslevel: stats
[ NewCS ] Process ID is: 4420
[ 09:20:06 ] [ NewCS ] Ready to GO!

fisierul newcs.xml este acesta :

<?xml version="1.0"?>
<!-- This file was created by NewCS & CCcam Config Creator Written By B16MCC -->

<newcsconfig>
<readers name="phoenix">
<device>
<name>phoenix</name>
<type>phoenix</type>
<mhz>357</mhz>
<node>/dev/usb/tts/0</node>
<parity>even</parity>
<reset>normal</reset>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>no</blocksa>
<blockua>no</blockua>
<blockga>no</blockga>
<blockc0>no</blockc0>
<Seca-PPV>no</Seca-PPV>
<PTShandshake>no</PTShandshake>
<crypto-special>no</crypto-special>
<carddetect>no</carddetect>
<newcamd_port>34000</newcamd_port>
<autosid>yes</autosid>
<priority>round</priority>
</device>
</readers>

<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>

<httpd>
<server>
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>
<name>newcs</user>
<password>newcs</password>
<accesslevel>admin</accesslevel>
</user>
</httpd>

<debug>
<password>NewCSpwd</password>
<mode>simple</mode>
<level>internal</level>
<type>all</type>
<output>console,tcp</output>
<tcp_port>1001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>

<newcamdserver>
<enabled>yes</enabled>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<name>newcs</name>
<user>
<name>dummy</name>
<password>dummy</password>
<au>on</au>
<allow>phoenix</allow>
</user>
</newcamdserver>
</newcsconfig>

cardul este vazut de catre newcs ...

probleme :

cccam nu vede linia data de catre newcs
N: 127.0.0.1 34000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14

si in browser nu ma pot conecta la newcs decat cu user daca bag si parola nu se conecteaza ...pur si simplu nu vrea cu parola si imi da "Access denied.." la multe chestii care se pot verifica din browser .

cu respect

[prodigy]

Remarc mai multe probleme aici, la prima vedere:
1. din logul acela de la Newcs NU SE VEDE CARDU DELOC, ar trebui sa iti arate ATR respond, key etc etc
2. Useru httpd, NU are access de admin, doar de stats.

[stargate]

cu ajutorul lui @resofty ... mare om , mare caracter ... am resusit sa leg newcs de cccam si sa mearga ok , in schimb nu am priceput cum fac sa mai dau inca o linie N pentru un alt cccam . cum trebuie modificat aici sau unde trebuie modificat :

<newcamdserver>
<enabled>yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user><name>dummy</name><password>dummy</password><au>on</au></user>
</newcamdserver>

multumesc

[zmeura]

Hai sa le aranjam putin,mai intai.deci ai asa:

<newcamdserver>
<enabled>yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>dummy</name>
<password>dummy</password>
<au>on</au>
</user>
</newcamdserver>

Sa ne uitam peste newcs-default.xml putin sa vedem ce ne spune legat de serverul newcamd:

<newcamdserver>
<!-- valid value for enabled are:
Yes, No - Enable or Disable newcamd server. -->
<enabled>Yes</enabled>
<!-- valid value for name are:
Any name - Used to identify server to remote clients,
if the remote client isnt newcamd, this field have no purpouse. -->
<name>newcs</name>
<!-- valid value for deskey are:
any 14x2 numbers - Used to encrypt the communication between
the client and the server. -->
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<!-- Notes about users:
The first user doesnt have au without beeing it set to on (unlike newcamd cardserver).
You can add as many user-sections as you want, just put them under eachother. -->
<user>
<!-- valid value for userfile are:
Any username you'd like - Used for client to logon (its case sensitive). -->
<name>dummy</name>
<!-- valid value for password are:
Any password you'd like - Used for client to logon (its case sensitive). -->
<password>dummy</password>
<!-- valid value for hostname are:
IP-address or DNS-name - Used for reverse login to the client. -->
<hostname>localhost</hostname>
<!-- valid value for port are:
0-65535 - Which port reverse login to the client. -->
<port>12000</port>
<!-- valid value for au are:
On,Off - Wheather the client are allowed to send EMM to the server. -->
<au>on</au>
<!-- valid value for sidoverride are:
On,Off - Wheather the client are allowed to override the SID-filter. -->
<sidoverride>off</sidoverride>
<!-- valid value for readers are device name,
if one <allow> present, other readers will be disabled! -->
<readers>
<allow>Phoenix on Com1</allow>
</readers>
<!-- valid value for spider are:
Yes,No - Wheather the client are allowed to be newcamd Cardspider. -->
<spider>No</spider>
<!-- valid value for rate are:
1-60 - number of seconds between each ecm -->
<rate>2</rate>
<!-- valid value for cardlevel are:
1 - If its set Mgcamd will use all cards over the same port. -->
<cardlevel>1</cardlevel>
</user>
</newcamdserver>

Mult de citit dar nu-i nimic.
Deci avem asa:

<newcamdserver>
<enabled>yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user1>
....
....
....
</user1>
<user2>
....
....
....
</user2>
</newcamdserver>

si tot asa putem adauga useri mai departe,toti avand comun acela deskey (primele linii pana la primul user tin de setarea general a serverului newcamd,fiind comune pentru toti userii,cred ca se poate face separat alt server newcamd cu deskey diferit si userii lui),dar pentru fiecare user avem user,parola,ip sau adresa dns plus port (e bine sa le pui pentru siguranta) dar si:
-au on sau off daca vrei sa primesti EMM pentru update de la respectivul peer
-sidoverride pentru a permite respectivului user sa treaca peste lista de sid-uri din newcs
-readers pentru setarea accesului la cititoare
-spider daca dorim sau nu ca userul sa fie sa nu newcamd Cardspider
-rate pentru a seta la cate secunde poate cere acel user un nou ECM (bun pentru a limita cererile din partea userilor,astfel putem proteja cardul)
-cardlevel este legat doar de mgcamd si NU are legatura cu reshare
La versiuni mai noi de newcs putem regasi si alte optiuni,acestea le aveam eu in exemplul folosit.Daca nu stiti ce face o linie nu o folositi,pentru ca inseamna ca nu va e utila.

Acum punctual pentru tine putem folosi ceva de genul asta,cat mai simplu:

<newcamdserver>
<enabled>yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>dummy</name>
<password>dummy</password>
<hostname>ip-ul primului receptor</hostname>
<port>portul pus in newcs la reader</port>
<au>on</au>
</user>
<user>
<name>dummy2</name>
<password>dummy2</password>
<hostname>ip-ul celui de al doilea receptor sau adresa dyndns</hostname>
<port>portul pus in newcs la reader</port>
<au>off</au> (aici e totusi in functie de ce vrei)
<rate>2</rate> (daca dai cuiva linia pune cel putin 2 ca sa nu iti traga de card prea tare)
</user>
</newcamdserver>

Sterge ce e in paranteze si pune IP si port unde trebuie,apoi compune linia N pentru cel de al doilea cu IP,port,user,password si ce mai e necesar in ea.
Bun de citit pentru toti cei care vor sa dea linii din newcs.Posibil sa mai fie si alte setari utile,dar ce e mai sus e de baza,simplu si usor.