Smartcard sid assign la Cccam 2.1.2

[marmex]

Nu stiu daca mai este un thread legat de aceasta problema.Am incercat la cardul
meu via si merge(numai cu cccam 2.1.2).Eu n-am probleme ca am 99% ecm OK la card dar am observat ca la conax si irdeto este varza.Cei cu aceste carduri au nok in prostie.Daca cineva cu card conax a incercat asa ceva poate aflam mai multe.Spre exemplu daca ai doar pachet basic nu-ti mai cer peersi ecm-uri de full card sau de alte pachete gen TVN sau DIGIALB , vorbesc de 1W.Am acest post si pe RDI dar nimic,poate aici a incercat cineva!
Astept pareri avizate!

[techcenter]

What is SID assign and how to configure ?
Below is the default information from CCcam.cfg for CCcam 2.1.2 { It will not work with older versions.

The purpose of this is to make sure your server only gets requests for sids that are valid to your card, thus reducing the number of bad ecms.

# Configure limited list of accepted sids for smartcard
# When omitted, all sids are allowed.
# (can work together with LOADBALANCE configuration, or for standalone cards)
#
# SMARTCARD SID ASSIGN : <device> <maxnumberofsids> { <sid1>, <sid2>, ... <sidn> }
#
# <device> is the reader devicenode
# <maxnumberofsids> limits the total number of sids assigned to the card (0 = use length of sid list)
# { <sid1>..<sidn> } lists the sids that are assigned to the smartcard, when omitted, <maxnumberofsids> is used to auto assign sids
#
# when <maxnumberofsids> is larger than the length of the sidlist, the remainder of the sids are auto assigned, till the list reaches <maxnumberofsids>
# Check entitlement output for realtime assignment list
#
# WARNING: when SMARTCARD SID ASSIGN config changes, restart is required before settings take effect
#
#example1: smartcard in device /dev/ttyUSB0 only handles requests for sids df3, df4, df5
#
# SMARTCARD SID ASSIGN : /dev/ttyUSB0 0 { 0df3,0df4,0df5 }
#
#example2: smartcard in device /dev/ttyUSB0 handles requests for max 5 sids, auto assigned in the order of occurance. A request for a 6th sid will be denied.
#
# SMARTCARD SID ASSIGN : /dev/ttyUSB0 5
#
#example3: smartcard in device /dev/ttyUSB0 handles requests for max 5 sids, 3 of which are df3, df4, df5, remaining 2 are auto assigned
#
# SMARTCARD SID ASSIGN : /dev/ttyUSB0 5 { 0df3,0df4,0df5 }

Here is an example that works with Sky UK FTV card

SMARTCARD SID ASSIGN : /dev/sci0 9 { 1d51,1e15,1e14,0f23,13ef,1e1e,1e1f,1e23,1e24 }

This is for the internal lower card reader of a Dreambox and it allows for 7 SIDS.

They are for the following channels
1d51 Five
1e15 Five
1e14 Five
0f23 Channel 4 HD
13ef Sky 3
1e1e Five US
1e1f Five US +1
1e23 Fiver
1e24 Fiver +1

The next option allows for 3 more SIDS to be auto assigned.

SMARTCARD SID ASSIGN : /dev/sci0 12 { 1d51,1e15,1e14,0f23,13ef,1e1e,1e1f,1e23,1e24 }

Another option is auto assign, if you know you have just 6 working channels for your card then you can let CCcam assign the SIDS for you.

SMARTCARD SID ASSIGN : /dev/sci0 6

Sursa aici

succesuri!

[aridan]

ecm-uri tot iti cer dar nu mai este intrebat cardul. raspunsul negativ este dat de cccam in 10ms si nu in 200ms. e bun pentru ca nu mai intreaba cardul degeaba si-l lasa sa dea doar ecm-uri utile.

[mondo]

Stie cineva cum trebuie setat SID ASSIGN pentru cardul de focus?

[bumbu]

Salut
@mondo

Aici ai exemple:

Free x Tv/ Dorcel/ French Love....... / Via/Smargo

SMARTCARD SID ASSIGN : /dev/ttyUSB2 0 { 0086, 0082, 21ad, 21b8, 3786, 3788, 378F, 378D, 378C }

HRT/ Via 2/3 /Smargo

SMARTCARD SID ASSIGN : /dev/ttyUSB3 0 { 2062, 206e, 206f }

Mtv Unlimited/ Conax /Smartmouse Bee

SMARTCARD SID ASSIGN : /dev/ttyS0 0 { 6FF3, 6FEE, 6FEF, 6FF1, 6FF0, 6FFF }

Pentru cartela de FOCUS, gasesti SIDS in cccam.chanellist, depinde de pachetul pe care il deschide cartela:

0B00:000000:000F "Focus Sat - Hustler TV [C 00]"
0B00:000000:0010 "Focus Sat - HBO Comedy [C 00]"

unde: 000F este sid pentru Hustler
0010 este sid pentru HBO

SMARTCARD SID ASSIGN : /dev/ttyUSB0 0 { 000F, 0010 }

Bafta

[mondo]

Multumesc @bumbu,

Cred ca m-am exprimat gresit.As fi vrut setarile gata facute (mura-n gura) de la cineva care a pus si a testat.Dar intre timp am facut eu unele pentru cardul de focus pachetul baza.Tot mai primesc cereri de ecm-uri insa am observat ca sunt foarte putine rateuri (nok-uri).Pentru cine are nevoie si vrea sa testeze :

SMARTCARD SID ASSIGN : /dev/sci0 0 { 0001,0002,0003,0004,0005,0006,0007,0008,0009,000A,000B,000C,000D,0015,0016,0017,0018,0019,001A,001B, 001C,001D,001E,001F,0020,0021,0024,0034,0035,0036,0037,0038,0039,003A,003B,003C,003F,0041,0042,0043, 03E9,03EA,03EB,03EC,03ED,03EF,03F0,03F1,03FC }