IPBOX 910 HD repair

[boom]

i have problem with my box , i put wrong flash software and now my reciver dead

how to fix to boot again ?


please help

[otheitis]

It is impossible to put software from other ipbox model in your ipbox.So you can not put software for ipbox 9000 in 900 or 910....Maybe it is a problem with bootloader.Try to installed DGS r9580 if you can not then send your ipbox in your local dealer.Jtag you can not do in ipbox.

[boom]

i try install beckup software and when it's goo to boothing it's write ER9

When i press of/on on the front panel only flash and then nothig no booting or usb update

when i connect to putty with rs 232 and start nothing read on putt

or it's totaly dead or i can fix this problem ?

[Snow]

with hyperterminal type all the command above it should restart



setenv bootargs "console=ttyAS1,115200 panic=3 root=/dev/mtdblock3 bigphysarea=1500 ip=$ipaddr:$serverip:$gateway:$netmask quiet";setenv bootcmd "bootm a0060000";saveenv;boot

then put last uboot or good image for your box

[boom]

thanks my frend i will try this .

regards