Cartela TVR in mbox+newcs

[zmeura]

Incearca sa adaugi lini E:
E: { 0032 }
E: { 0033 }
Eventual le pui pe rand si vezi cu care deschide.

[crizatu]

Nu vrea nici asa... ce-o avea? Ca a mers... m-am dat si eu putin pe alt receptor (pe alte posturi, n-am modificat nimic in config la dm500 si la ipbox) si cand m-am dat si eu inapoi pe tvr a luat-o razna

[zildan]

in 18.10.2008 scriam:

Aseara am pierdut ceva timp cu cardul de TVR si am reusit sa il pornesc pe Kathy cu Mbox si Newcs., acum e o problema rezolvata.
Pasii care trebuiesc facuti sunt urmatorii:

1. Newcs 1.60 beta (sigur aceasta versiune citeste cardul )

2. Linia C de forma
C:{ 127.0.0.1 port kathy kathy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 } { 10 } { 05005900:05025900 )

3. In cwshare.cfg
H: { 05025900; } ( cu versiunea Mbox 0.4 built 0013, dar se pare ca nu prea are efect)

4. In port.list se pun
G: { 05005910 }
G: { 0500F720 }
E: { 0031 }
E: { 0034 }
Spor la treaba!

Ultimele versiuni Newcs citesc cardul, asa ca prima parte (cea cu versiunea NewCS 1.60) se poate sari.

[crizatu]

Multumesc frumos tuturor, pana la urma am reinstalat imaginea pe DM500, am refacut toate setarile si a inceput sa mearga

[licapavel]

Revin si eu cu o mica "problemutza"
M-am inspirat din exemplele voastre, am primit si fisierele gata configurate de la cineva...Am asa:

<?xml version="1.0"?>
<newCSconfig>
    <readers name="Card Readers">
        <device>
            <name>upper</name>
            <type>azbox</type>
            <node>/dev/scard</node>
            <export>yes</export>
            <enabled>yes</enabled>
            <blocksa>no</blocksa>
            <blockua>no</blockua>
            <blockga>No</blockga>
            <newcamd_port>20000</newcamd_port>
            <autosid>yes</autosid>
            <carddetect>yes</carddetect>
            <priority>hard</priority>
            <PTShandshake>no</PTShandshake>
            <mhz>357</mhz>
            <boxkey>000000000000000000</boxkey>
            <rsa>000000000000000000000000000000000000000000</rsa>
        </device>
    </readers>
    <xmlserver>
        <enabled>0</enabled>
    </xmlserver>
    <radegastserver>
            <enabled>Yes</enabled>
            <port>16000</port>
            <allow>
                
            </allow>
    </radegastserver>
    <cache>
        <emm>10</emm>
        <ecm>-1</ecm>
    </cache>    
    <debug>
        <darint39>sintoi51</darint39>
        <level>internal</level>    
        <type>all</type>
        <output>console, tcp</output>
        <logfile>/tmp/newcs.txt</logfile>
        <console_options></console_options>
        <file_options></file_options>
        <udp_host>172.16.1.1</udp_host>
        <udp_port>9000</udp_port>
        <udp_options></udp_options>
        <tcp_port>1001</tcp_port>
        <tcp_options></tcp_options>
    </debug>
    <newcamdserver>
        <enabled>yes</enabled>
        <name>local</name>
        <deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
        <user>
            <name>azbox</name>
            <password>lica</password>
            <hostname>127.0.0.1</hostname>
            <port>12000</port>
        </user>
    </newcamd_server>
</newCSconfig>

Apoi in cwshare:

M: { lic........no-ip.info { ******** }}

C: { 127.0.0.1 20000 azbox lica 01 02 03 04 05 06 07 08 09 10 11 12 13 14 } { 10 } { 05005900:05025900 }
I: { 3 }
O: { 4000 2000 }
X: { 9 }
H: { 05025900 }

Iar in 20000.list am asa:

E: { 0031 }
E: { 0034 }
G: { 0500F720 }
G: { 05005910 }

Nu inteleg de ce imi merge doar TVR 1. Iar daca schimb pe TVR HD imi merge doar cateva secunde apoi se blocheaza.
In debug imi arata ca decodeaza la inceput apoi cand schimb se blocheaza si zice de "ReReading.tmp" Mie nu-mi genereaza acest fisier in /tmp/

*ECM: CA ID: 0x0500 Viaccess       (000000)     -> CA PID: 0x0032
[21:06:01] *ECM: CA ID: 0x0500 Viaccess       (000000)     -> CA PID: 0x0033
[21:06:01] *ECM: CA ID: 0x0500 Viaccess       (000000)     -> CA PID: 0x0034
[21:06:01] ==================================================================
[21:06:02] Searching CW cache for CaID 0x0502, pid 0x0032...no CW in cache 
[21:06:02] Searching CW cache for CaID 0x0502, pid 0x0033...no CW in cache 
[21:06:02] Searching CW cache for CaID 0x0502, pid 0x0034...no CW in cache 
[21:06:02] [NEWCAMD] Putting ECM ([DMX - 0]) (<-0) from local host, caid:0x0502, ecmpid:0x0034,sidpid:0x0001 in ECM buffer (1/10)
[21:06:02] [NEWCAMD] Sending ECM caid:0x0502, ecmpid:0x0034,  sidpid:0x0001 to (127.0.0.1:20000).
[21:06:02] [NEWCAMD] sent sequence id 0008 , received sequence id 0008
[21:06:02] [NEWCAMD] Control words received successfully (127.0.0.1:20000), time (300 ms).
[21:06:02] <-[DMX - 0] CW FOR ME :), from (127.0.0.1:20000) (<-0) (302 ms)
[21:06:02] ===== Viaccess ECM on CaID 0x0502, pid 0x0034 ====
[21:06:02] prov: 0D77
[21:06:02] CW0:  87 3C 38 FB 10 D5 CE B3 
[21:06:02] CW1:  1A A4 82 40 8C 53 07 E6 
[21:06:02] =================================================
[21:06:06] 
[21:06:06] [DMX - 0] ReReading pmt.tmp
[21:06:06] ==================================================================
[21:06:06] ==================================================================
[21:06:21] 
[21:06:21] [DMX - 0] ReReading pmt.tmp
[21:06:21] ==================================================================
[21:06:21] ==================================================================
[21:06:25] 
[21:06:25] [DMX - 0] ReReading pmt.tmp

ce pot sa fac sa-mi decodeze si TVR HD sau TVR2? Precizez ca am un AZBOX premium

[bade]

A facut cineva update acum in noiembrie cu newcs+mbox 04 la card? ca la mine nu mai vrea..........pana acum a mers brici........dar de ieri nu mai vrea...... trebuie neaparat sa pun gbox pentru update ?........

[zmeura]

Din ce stiu nici o versiune de mbox nu trimite emm catre newcs.Incearca cu gbox sau newcs+mgcamd.