Incubuscam pt ipbox 91&9xx&9000

04/01/2009, V0.55
- fixed some little bugs on DGStations api interface
- added multi descrambling support for DGStations HD original firmwares (PIP, timeshift, recording channels, second tuner support)
- added version sigma to be used with AzBox HD
I've been noticed about many peoples not able to view some channels, don't forget to edit your prio file. Editing that file will give you the ability to chose the right pid wich the cam should be select (if you will not edit it, the cam will use the first pid and then try to use other pids, but this will take much more time to be able to see something)

ai testat? merge ok?sau are probleme...mai multe linii aceapta?

nu accepta mai multe linii, merge dual decoding

mai multe linii , cate ar fii maximul acceptate ?
peste 40 sau sub 30 de linii?

pe incubus nu merge momentan decat 1 linie. poti fi doar client de cccam

vad ca si pe AzBox HD se poate pune?

va rog precizati toate receiverele care merg cu incubus..

ceva la max 200 e , e compatibil? optibox, humax, etc...sa se poata lega la un server cccam..

merci

Scrie in read me ce suporta:
available for processor types: sh4 (tested only on Cuberevo, Cuberevo mini, kathrein ufs910 with e2), sigma (azboxhd)

Use the e2 version on kathrein with enigma 2 on board, the other version (*.sh4) on ipbox 9000/900 with dgstation firmwares
Use the sigma version on azbox hd firmwares

Si nu stiu daca ati observat, dar deschide tvr hd

Am o problema cu incubus inca de la prima varianta. Ma mir cu nu o mai are nimeni. La pornirea receiverului (Ipbox 910) cu incubus default canalele se vad cateva secunde dupa care crapa si trebuie sa dau restart cam. Apoi merge ok. Asa e normal?

Incubuscamd 0.70 released


07/02/2009, V0.70
- added auto-reconnection on servers (if lost connection previously)
- fixed a bug that caused the lost of cws
- added multi-server support for cccam (you can connect as a client to more than one server, this is a beta try, seems almost stable but it could have many bugs)
- fixed nagra providers (nagra3 and nagra2) interpretation (now they should work on cccam protocol, but i've not tested it so please report if you find bugs)
- fixed biss over cccam protocol
- added possibility to get emu shared data by server on cccam protocol (see config file)
- added logs information from console and into file (see config file)
- changed a bit the config file

Consider this version as a BETA one, i don't think it's really stable as i can think.
GBOX protocol is not fully supported in this version, I will fix it in the next release.


[Only registered and activated users can see links. Click Here To Register...]

12/03/1956, V0.75
- fixed auto-reconnection on servers
- fixed multi-server connections
- fixed many bugs on memory that caused cam's crashes
- fixed timeshift
- fixed audio change selection wich cause the stop of video/audio on original dgs firmware
GBOX protocol still not fully supported (i can't test it but i think it shouldn't work in this version)

[Only registered and activated users can see links. Click Here To Register...]

incubusCamd, cam daemon.v 0.80
---------------------------------------------------------------------------------

Available for processor types: sh4 (tested only on Cuberevo family receivers)

Use the e2 version on cuberevo with enigma 2 on board, the other version (*.sh4) on ipbox 9000/900 with dgstation firmwares
Use the sigma version on azbox hd firmwares

Card client for protocols: cccam, gbox, newcamd 5.20, newcamd 5.25, radegast old, radegast new, aroureos

Emulators for: Seca 1, Seca 2, Viaccess 1, Viaccess 2, Viaccess 2.3, Viaccess 2.4, Conax, Cryptoworks, Tps Crypt 1, Tps Crypt 2, Tps Crypt 3, Biss, Constant CW

.conf and .prio files can be inserted in the /var/bin directory, or in /etc, or in /var/keys
SoftCam.Key must be inserted in the /var/keys directory

----------------
History:

24/10/1917, V0.80
- added caids tunneling (check the config file to know how to set them, used for example with PremiereHD card on betacrypt)
- fixed cryptoworks provider id recognition
- gbox protocol multiserver added
- newcamd fixes for multiserver
- radegast fixes for multiserver
- aroureos fixes for multiserver
- added test version of internal emu (see config file to know how to enable it)

[Only registered and activated users can see links. Click Here To Register...]

V0.82
- second try fixing caids tunneling (with PremiereHD card on betacrypt, i can't test it so, i don't know if it works or not)
- first try fixing caid 0603 (same as premierehd, i can't test it, please report if it works or not)
- fixed long ecm bugs
- full support for C**AM 2.1.0 protocol
- many minor fixes for stability (hope this version will be better than last on)



[Only registered and activated users can see links. Click Here To Register...]

e adevarat ca pe ultimele var de incubus merge multi server?
cate?
si cum? (eu am incercat, dar daca era o linie cazuta dura o mie de ani sa se con la urmatoarea), de fapt cred ca se conecteaza decat la una si dacas nu e ok trece la urmatoarea

poti conecta cate servere doresti. merge foarte bine, s-ar putea sa ai greseli la configurare

Just two questions to those who have tested incubuscamd v0.82:
* Does it really work with CCcam 2.1.0 protocol
* Does Premiere HD work?

Thanks!

1. yes, it does work with cccam 2.1.0
2. Premiere HD works just fine :))

Pai mai oameni buni ...cu raspunsuri in doi peri ...cine poate sa inteleaga ceva ! Daca DA ...cum ! ce setari trebuie facute ... exemple ...si poate facem cu totii un pas inainte ! raspunsul in doi peri este mai rau decat tacerea !!!

Eu am incecat asa :

- SIF 031 flash
- incubus 082 sh40 enigma
- in incubusCamd.conf am facut urmatoarele declaratii

decoder_type=1
card_server_url_0=cccam://myuser:mypasswd@servername.homelinux.com:12000


... si din pacate nu decodeaza ... de ce ...uite asta ar fi un raspuns interesant !!!

[Prov:000000:CaID:0000]

decoder_type=1
card_server_url_0=cccam://myuser:mypasswd@servername.homelinux.com:12000
card_server_url_1=cccam://myuser22:mypasswd22@servername22.homelinux.com:12000
card_server_url_2=cccam://myuser333:mypasswd333@servername333.homelinux.com:12000



[Servers]


card_server_url=cccam://myuser:mypasswd@servername.homelinux.com:12000
card_server_url=cccam://myuser22:mypasswd22@servername22.homelinux.com:12000
card_server_url=cccam://myuser333:mypasswd333@servername333.homelinux.com:12000



[CaIDTunnel]

1833:1702:000000:0082 # this one should tunnel premiereHD nagra3 into betacrypt cards
1833:1702:000000:0081 # this one should tunnel premiereHD nagra3 into betacrypt cards

Oho ! un raspuns simplu, direct si usor ...ca un fulg de zapada ! raspuns care a imprastiat ceatza ! Tnks !