0.4 BETA build 0015
===================
-Added code for gbox protocol over TCP (TCP<->UDP / UDP<->TCP / TCP<->TCP). Read README.cwshare.txt.
-Few changes in code
[Only registered and activated users can see links. Click Here To Register...]
:band:
Printable View
0.4 BETA build 0015
===================
-Added code for gbox protocol over TCP (TCP<->UDP / UDP<->TCP / TCP<->TCP). Read README.cwshare.txt.
-Few changes in code
[Only registered and activated users can see links. Click Here To Register...]
:band:
0.4 BETA build 0016
-NOTICE: gbox support has been broken in this build, so dont try to connect to gbox/(old mbox) network, ain't gona work !!!!
-Remove mapping for N3 and some Conax providers.
-Fix problem with local card(s) priority( I hope ).
-Fix PMT parsing code, not showing some crypto systems.
NOTE: THIS BUILD IS HIGHLY EXPERIMENTAL!!
0.4 BETA build 0017
===================
-NOTICE: gbox support still broken !!!
-Fix few problems with new hello msgs.
-Added detection if peer goes offline but didnt send offline hello msg (mbox crashed or mbox kill-ed).
-Changed code for ECM filter(s).
0.4 BETA build 0018
===================
-NOTICE: gbox support still broken !!!
-Added W option in add.data file to request current dcw caches from one peer.If there is some dcw caches from that peer, new dcw_cache.info file will be created in tmp path.
-Fixed few problems with new hello msgs again [Only registered and activated users can see links. Click Here To Register...]).
-Better handling ECM filters
[Only registered and activated users can see links. Click Here To Register...]
0.4 BETA build 0019
===================
-NOTICE: gbox support still broken !!!
-Fix not showing online some peers.
File Name: mbox 0.4 PRE BETA build 0020
File Submitter: [Only registered and activated users can see links. Click Here To Register...]
File Submitted: 2 Feb 2009
File Category: [Only registered and activated users can see links. Click Here To Register...]
0.4 PRE BETA build 0020
=======================
-TCP peers/connection (TCP0/TCP1 in cwshare.cfg) now works only with mbox peers!
-Mbox peers will have 1.00 as version number.
-Mbox peers now must be in G line in cwshare.cfg,D line stay for old gboxx peers.
-Added R option in mbox.cfg.
-Added J option in mbox.cfg. You can change J option with add.data at any time.
-Added A option in mbox.cfg , needed for QBoxHD receivers.
-Added back gboxx connection/protocol.Gboxx peers cant connect to mbox peers and vice versa!!!!
-Mbox now starts as deamon(background process).
-Fixed HD channels.
-Fixed problem with duplicate boxids, now mbox keep only boxid that has lower distance.
-Added support for AzBOX receivers(binary-> mbox_module).Dont expect mbox to work as should, because current API for AzboX receivers has restrictions regarding ECM "pids" streaming.
[Only registered and activated users can see links. Click Here To Register...]
0.4 PRE BETA build 0021 versiunea 5
=======================
-Fix problem connecting to old mbox 016-019 versions.
-Fix problem with stack
-Fix problem with sending good ECM message to mbox ver. 0016-0019.
-Added H option in mbox.cfg for mapping provids.
-Few changes in code for local card priority, H option in cwshare.cfg.Now local card priority should work ok.
-Added code to check if same ECM is allready in ECM buffer for local card decoding over newcs.
ATENTIE:Liniile venite din gbox si mbox versiuni sub 0015 inclusiv sunt linii D iar cele venite din mbox 016 sau mai nou sunt linii G,avand aceeasi configuratie in stil "old gbox".:)
mbox 0.4 PRE BETA build 0021 REUPLOADED 6-th time
0.4 PRE BETA build 0021
=======================
-Fix problem connecting to old mbox 016-019 versions.
-Fix problem with stack
-Fix problem with sending good ECM message to mbox ver. 0016-0019.
-Added H option in mbox.cfg for mapping provids.
-Few changes in code for local card priority, H option in cwshare.cfg.Now local card priority should work ok.
-Added code to check if same ECM is allready in ECM buffer for local card decoding over newcs.
-Fix problem not setting CA pids after channel change for devices that use dvb api.Screen stay black.
-Fix problem sometimes mbox start hitting cached CW for same ECM all the time.Now it should be okey.
[Only registered and activated users can see links. Click Here To Register...]
Mbox 0.4 PRE BETA build 0021 REUPLOADED 7-th time
0.4 PRE BETA build 0021
=======================
-Fix problem connecting to old mbox 016-019 versions.
-Fix problem with stack
-Fix problem with sending good ECM message to mbox ver. 0016-0019.
-Added H option in mbox.cfg for mapping provids.
-Few changes in code for local card priority, H option in cwshare.cfg.Now local card priority should work ok.
-Added code to check if same ECM is allready in ECM buffer for local card decoding over newcs.
-Fix problem not setting CA pids after channel change for devices that use dvb api.Screen stay black.
-Fix problem sometimes mbox start hitting cached CW for same ECM all the time.Now it should be okey.
-Fix problem black screen if first DCW is from cache for devices that use dvb api.
[Only registered and activated users can see links. Click Here To Register...]
0.4 PRE BETA build 0021 8-th time
=======================
-Fix problem connecting to old mbox 016-019 versions.
-Fix problem with stack
-Fix problem with sending good ECM message to mbox ver. 0016-0019.
-Added H option in mbox.cfg for mapping provids.
-Few changes in code for local card priority, H option in cwshare.cfg.Now local card priority should work ok.
-Added code to check if same ECM is allready in ECM buffer for local card decoding over newcs.
-Fix problem not setting CA pids after channel change for devices that use dvb api.Screen stay black.
-Fix problem sometimes mbox start hitting cached CW for same ECM all the time.Now it should be okey.
-Fix problem black screen if first DCW is from cache for devices that use dvb api.
-Fix problem with black screen if using local card for decoding over newcs for devices that use dvb api.
0.4 BETA build 0022
=======================
-Added mbox.prio file for adding priority system selection.Put the file in "K line-mbox.cfg" path directory.If no dcw arrived after several ECM send, mbox will reread PMT without using priority list.
Mbox 0.4 BETA build 0022 3 REUPLOAD
Quote:
-Added mbox.prio file for adding priority system selection.Put the file in "K line-mbox.cfg" path directory.If no dcw arrived after several ECM send, mbox will reread PMT without using priority list.
-Fix bug resharing cards from gboxx and mbox peers to each other.
-Few small changes in code.
-Fix problem mbox hangs after hello message.
-Fix problem repetition of CaID 0x1702 ...found CW in cache on Premier channels.
-Changed priority code ,so now you can use P line with or without sid pid.P line with sid pid has priority over P line without sid pid.
-Changed how much ecm/sid pids can be loaded from port.list file, from 150 to 500 pids.
0.4 BETA build 0023
=======================
-Fix problem with returning wrong boxid in (cached) DCW message.
-Few changes in cache code.
-Few changes in code for cards reshare.
-Added support for SSSP protocol, S line in mbox.cfg, tested only on Windows OS, on Linux OS still doesnt work!!.
-Added support for triple dragon receiver(set D on 5 in mbox.cfg).
-Few changes in code for Qbox HD receiver(set D on 6 and A on 1 in mbox.cfg).
-Information in stat.info file is just for mbox peers!!.
-Added mapping , from 1815 to 1801 in H line (mbox.cfg).
[Only registered and activated users can see links. Click Here To Register...]
0.4 BETA build 0023
=======================
-Fix problem with returning wrong boxid in (cached) DCW message.
-Few changes in cache code.
-Few changes in code for cards reshare.
-Added support for SSSP protocol, S line in mbox.cfg, tested only on Windows OS, on Linux OS still doesnt work!!.
-Added support for triple dragon receiver(set D on 5 in mbox.cfg).
-Few changes in code for Qbox HD receiver(set D on 6 and A on 1 in mbox.cfg).
-Information in stat.info file is just for mbox peers!!.
-Added mapping , from 1815 to 1801 in H line (mbox.cfg).
-Few changes in sssp code, affect just mbox.exe file.
[Only registered and activated users can see links. Click Here To Register...]
0.4 BETA build 0023
=======================
-Fix problem with returning wrong boxid in (cached) DCW message.
-Few changes in cache code.
-Few changes in code for cards reshare.
-Added support for SSSP protocol, S line in mbox.cfg, tested only on Windows OS, on Linux OS still doesnt work!!.
-Added support for triple dragon receiver(set D on 5 in mbox.cfg).
-Few changes in code for Qbox HD receiver(set D on 6 and A on 1 in mbox.cfg).
-Information in stat.info file is just for mbox peers!!.
-Added mapping , from 1815 to 1801 in H line (mbox.cfg).
-Few changes in sssp code, affect just mbox.exe file.
-Fix problem mapping 1815 to 1801, add mapping from 1822 to 1801.
-Few changes.
[Only registered and activated users can see links. Click Here To Register...]
0.4 BETA build 0023
=======================
-Fix problem with returning wrong boxid in (cached) DCW message.
-Few changes in cache code.
-Few changes in code for cards reshare.
-Added support for SSSP protocol, S line in mbox.cfg, tested only on Windows OS, on Linux OS still doesnt work!!.
-Added support for triple dragon receiver(set D on 5 in mbox.cfg).
-Few changes in code for Qbox HD receiver(set D on 6 and A on 1 in mbox.cfg).
-Information in stat.info file is just for mbox peers!!.
-Added mapping , from 1815 to 1801 in H line (mbox.cfg).
-Few changes in sssp code, affect just mbox.exe file.
-Fix problem mapping 1815 to 1801, add mapping from 1822 to 1801.
-Few changes.
-From now gboxx and mbox protocol is seperated. They are compiled in seperated files(mbox with only gboxx is in "mboxg" folder). For mbox protocol G line stay for peer.
-Added SSSP code for Linux OS, it wasnt tested!!.
[Only registered and activated users can see links. Click Here To Register...]
Mda se pare ca si-au bagat piciorul si in mbox.
Prin separarea din nou a mboxului de gbox ce mare realizare sa facut ??