HOW TO gbox in Dreambox

Aceasta pagina este un mic ajutor pentru utilizatorii Dreambox & Gbox.
pagina realizata de L_DM500s

Va poate ajuta si : [Only registered and activated users can see links. Click Here To Register...]

Aveti nevoie de:
Gbox - sunt citeva versiuni disponibile: 2.1b, 2.20, 2.22, 2.23, 2.24, 2.25... Recomand 2.1b sau 2.25 daca primiti <500 cartele virtuale.
DCC - [Only registered and activated users can see links. Click Here To Register...]
optional plugin G-Box Center



Instaleaza DCC in PC si seteaza comunicatia cu Dreambox-ul.
Acum poti incepe instalarea fisierelor in Dream.

copiaza fisierul gbox in dream in dir: var/bin.
Seteaza attributul 755 pentru acest fisier.
- daca ai si urmatoarele fisere copiaza-le si seteaza atributele 755 si pentru ele:
s2issuer.b
s2provid.b

[Only registered and activated users can see links. Click Here To Register...]

copiaza scriptul gbox_cam.sh in dream in dir: /var/script
Seteaza attributul 755 pentru acest fisier.

[Only registered and activated users can see links. Click Here To Register...]

acest script este folosit pentru lansarea in executie a gbox-ului.
aceasta este o lista a acestui script:

# start gbox_cam.sh listing
#!/bin/sh
########################################
###### Powered by The Gemini Team ######
### [Only registered and activated users can see links. Click Here To Register...] ###
########################################
# camid #
# 0000 = Commom Interface #
# 0001->0199 = for User Experiment #
# 0199 = Dccamd #
# 0200->0299 = Fbiss #
# 0300->0399 = Camd3 #
# 0400->0499 = Camx #
# 0500->0599 = Camx-radegast-cs #
# 0600->0699 = Evocamd #
# 0700->0799 = Evocamd-ronlad-cs #
# 0800->0899 = Mgcamd #
# 0900->0999 = Mgcamd-ronald-cs #
# 1000->1099 = Newcamd #
# 1100->1199 = Newcamd-ronald-cs #
# 1200->1299 = Newcamd-spider #
# 1300->1399 = Radegast #
# 1400->1499 = Ronald-cs #
# 1500->1599 = Scam #
# 1600->1699 = Scam-ronald-cs #
# 1700->1799 = Cardserver #
# 1800->1899 = Mgcamd with Cardserver #
# 9800->9899 = reserved #
# 9900->9999 = reserved #
########################################
CAMNAME="Gbox"
USERNAME=""
ZAPTIME=6
CAMID=970
DVBSET=1
INFOFILE="ecm.info"
# end


# This method cleans up /tmp folder of gbox files
remove_tmp ()
{
rm -rf /tmp/*info* /tmp/*gbox* /tmp/*online* /tmp/*share* /tmp/Newcs* /tmp/atack* /tmp/debug*
}

# This method starts Gbox
start_cam ()
{
/var/bin/gbox &
}

# This method stops Gbox and then calles the tmp cleanup method
stop_cam ()
{
touch /tmp/gbox.kill
/bin/prockill gbox
remove_tmp
}

case "$1" in
start)
echo "[SCRIPT] $1: $CAMNAME"
start_cam
;;
stop)
echo "[SCRIPT] $1: $CAMNAME"
stop_cam
;;
restart)
echo "Restarting $CAMNAME"
stop_cam
start_cam
;;
*)
"$0" stop
exit 1
;;
esac

exit 0
# end gbox_cam.sh listing
----------------------------

copiaza fisierele de config si key in dir: /var/keys

- fisiere de configuratie:
gbox_cfg
cwshare.cfg
softcam.cfg

rom02.b
rom02eep.b
rom02ram.b
rom03.b
rom03eep.b
rom03ram.b
rom07.b
rom07eep.b
rom07ram.b
rom10.b
rom10eep.b
rom10ram.b
rom11.b
rom11eep.b
rom11ram.b

- fisiere optionale cu key:
conax
irdeto
nagra
seca
via

- alte fisiere optionale:
ident.info - in acest fisier sunt datele operatorilor; respectiv codurile asignate cu numele lor pentru afisare usoara cu G-Box Center.
ignore.list - pentru a ignora anumiti operatori sau cartele vechi, false.
knowns.ini
priority.list
replace.list

[Only registered and activated users can see links. Click Here To Register...]

Acum va trebui sa repornesti Dreambox-ul.
Mergi in Blue Panel si selecteaza Gbox, apoi selecteaza Start/Restart Cam pentru a activa Gbox cam-ul.

Acum va trebui sa repornesti Dreambox-ul.
Mergi in Blue Panel si selecteaza Gbox, apoi selecteaza Start/Restart Cam pentru a activa Gbox cam-ul.


[Only registered and activated users can see links. Click Here To Register...]

Pentru ca Gbox-ul sa functioneze corect trebuie sa ai in dir: /var/keys anumite fisiere de configuratie:
gbox_cfg, softcam.cfg and cwshare.cfg ( cwshare.cfg -este important sa-l setezi cu datele tale ).

Aici este listingul gbox_cfg pe care poti sa-l copiezi si sa-l inserezi intr-un fisier text si apoi sa-l salvezi cu numele: gbox_cfg daca nu cumva il ai deja.

# start gbox config file

# Trace/Debug
# xx yz ; xx=00 no konsole output
# xx yz ; xx=01 konsole output
# xx yz ; y=0 debug output (don't use)
# xx yz ; y=1 no debug output
# xx yz ; z=0 ouput to konsole
# xx yz ; z=1 output to /var/tmp/debug.txt
# xx yz ; z=2 Output to UDP (to capture with gboxt)
Z: { 00 12 } 192.168.1.4 8024

# Task type
# 00 ** normal mode gbox mode (no season, use Multicam instead)
# 01 ** Season Emulation in a Irdeto allcam chid 0602 nonZ
# 10 ** Season Emulation in a Irdeto allcam chid 1702 nonZ
# 11 ** Season Emulation in a Irdeto allcam chid 1702 Z
# 12 ** Season Emulation in a Irdeto allcam chid 1722 Z
# 13 ** Season Emulation in a Irdeto allcam chid 1762 Z
# ** *1 Com port to use for season emulatiom (1 or 2)
# ** 0* Use CTS fur RST detection
# ** 1* Use DCD fur RST detection
# ** ** 9600 = Baudrate to be used (working only on dbox2)
W: { 00 00 } 9600

# gbox working mode
# 00 pure Emu
# 01 pure SoftCam (when card inside), Emu (when no card inside)
# 02 pure Net Client
# 03 Mixed mode !!!!! always use this !!!!!
G: { 03 }

# Display ECM messages on Konsole
# 00 don't show any ECM's
# 01 show only valid ECM's
# 02 show valid and bad ECM's with complete data display
C: { 01 }

# Display EMM messages on Konsole
# *0 don't show any EMM's
# *1 show only valid EMM's
# *2 show valid and bad EMM's with complete data display
# 1* Log any tier change on PW-Nagra-17xx cards into /var/keys/pwupdate.log
M: { 01 }

# AutoUpdate
# 00 is ignored (default)
# 01 enable AU
# 02 Auto AU !!!!! always use this !!!!!
A: { 02 }

# Key update
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
U: { 02 }

# Hash pids
# 00 hash all pids, DO NOT USE THIS OPTION, IT IS ONLY FOR TESTING STUFF
# 01 hash only pids with implemented algos and available keys !!!!! always use this !!!!!
H: { 01 }

# Key files folder
# 00 keyfiles in /var/keys
# 01 keyfiles in /var/tmp
T: { 00 }

# On Screen Display for the Multysystemcam on com1/com2
# 00 No OSD (default)
# 01 display Smartcard messages in Neutrino
# 02 display Smartcard messages in Neutrino new nhttpd format
# 03 display Smartcard messages in Enigma
# mypass (use user=root and pass=mypass for nhttpd)
O: { 03 } 192.168.1.2

# Logger and NET-mode UDP port Init
# 00 do not init UDP port
# 01 Init UDP port for IP, port, UDP
L: { 00 } 10.0.0.3 8017

# demux, multicam/comport configuration
# *x ** ; x = device nummber to be used (0= default)
# D* ** ; force use of /proc/bus/gtx for cw write operations
(in the dbox2 the gbox writes directly the CW's, 00 is the
recommended mode ! No drivers are required) use D* ** ONLY if
you have Problems. 0* ** should be prefered !!!
# F* ** ; write CW's in both devices (used for PVR in STB04xxx devices)
# ** y* ; y=0001b (0x1*) use slot1 as Multicam (only on STB04xxx)
# ** y* ; y=0010b (0x2*) use slot2 as Multicam (only on STB04xxx)
# ** y* ; y=0011b (0x3*) use slot1 and slot2 as Multicams (only on STB04xxx)
# ** *z ; z=0001b (0x*1) use com1 as Multicam
# ** *z ; z=0010b (0x*2) use com2 as Multicam
# ** *z ; z=0011b (0x*3) use com1 and com2 as Multicams
# ** yz ; yz=00110011b (0x33) use slot1+slot2+com1+com2 as Multicams
# ** *z ; z=0100b (0x*4) invert CTS detection on com1
# ** *z ; z=1000b (0x*8) invert CTS detection on com2
# example: yz = 0x0A = 00001010 (use com2 with inverted CTS detection line)
V: { F0 10 }

# extra options to override default seting in case you expirience Problems,
# normaly these setings are not required.
#
# cpu, api, cw write method
#
# 00 auto
# 01 80X86
# 02 MPC823
# 03 IBM STB04xxx
# 00 auto
# 01 ibm
# 02 api2
# 03 api3
# 00 cw write style = use internal routine (only dbox2)
# 01 cw write style = CA_SET_DESCR type1 (dbox2, vdr)
# 02 cw write style = CA_SET_DESCR type2
# 03 cw write style = CA_SET_DESCR type3
# 04 cw write style = 16 byte /proc/bus/gtx
# 05 cw write style = 4096 byte /proc/bus/gtx, cw offset=0x04D0
# xx write cw in 1st device with index=xx
# yy write cw in 2nd device with index=yy
# 01 means with .index=0 (default)
# 02 means with .index=1
# 03 means with .index=0 and .index=1
# .. any bitwise combination ...
# FF means with all 8 indexes (0-7)
#J: { 01 00 00 01 01 }

# Files, folders, devices
# folder/device comment
#
#F: { 01 } /var/tmp/pmt.tmp // pmt file
#F: { 02 } /var/tmp/emm.info // key update log file
#F: { 03 } /var/tmp/ecm.info // ecm info file
#F: { 04 } /var/tmp/atack.txt // atack info file
#F: { 11 } /var/keys // folder for config files
#F: { 12 } /var/tmp // folder for temporary file
#F: { 13 } /var/keys // folder for keyfiles
#F: { 21 } /dev/dvb/card0/ca0 // ca device
#F: { 22 } /dev/dvb/card0/dvr0 // dvr device
F: { 23 } /dev/dvb/card0/demux0 // demux device
#F: { 31 } /dev/dvb/adapter0/ca1 // second ca device to write cw's (recording)
#F: { 41 } /dev/sci0 // STB04xxx slot1
#F: { 42 } /dev/sci1 // STB04xxx slot1
#F: { 43 } /dev/tts/0 // rs232 com1
#F: { 44 } /dev/tts/1 // rs232 com2

# For overclocking freaks, Clocking internal STB04xxx slots with:
# 1=7.80MHz 2=6.30MHz 3=5.25MHz 4=4.50MHz 5=3.94MHz 6=3.50MHz 7=3.15MHz
# Irdeto works fine on 7.8MHz, all other fine on 6.30MHz or 5.25MHz
# The Dream has not a clean clock signal, some cards that are sensitive will
# refuse to work even on 3.5MHz, thats why 3.15MHz is the default value there.
# On other STB04xxx recievers the same cards work with 6.30MHz
#
#F: { 51 } 02 // irdeto
#F: { 52 } 03 // seca
#F: { 53 } 03 // viaccess
#F: { 54 } 03 // nagra
#F: { 55 } 03 // crypto
#F: { 57 } 03 // conax
#F: { 58 } 03 // nds

# end gbox config file



Aici este listingul softcam.cfg pe care poti sa-l copiezi si sa-l inserezi intr-un fisier text si apoi sa-l salvezi cu numele: softcam.cfg daca nu cumva il ai deja.

# SoftCam EMM Log configuration
#
# Save EMM data
# 00 Don't save anything (default)
# 01 Save processed EMMs (/var/tmp/emmproc.bin)
# 02 Save rejected EMMs (/var/tmp/emmblock.bin)
# 03 Save both EMMs
L: { 00 }

# Check additional OSC Frequency !!! ONLY FOR DBOX2 !!!
# 00 No Check (default)
# >0 Check on, Value in KHz , example 8MHz=08000
F: { 00 }

# Check additional Baurate for ATR !!! ONLY FOR DBOX2 !!!
# 00 No Check (default)
# >0 Check on, Value in bit/s, example 81861
B: { 00 }

# Enable TPScrypt Support
# *0 TPScrypt off
# *1 TPScrypt on (default)
# 1* don't use PTS on Viaccess cards
# 2* don't use PTS on Cryptoworks cards
# 3* don't use PTS on Viaccess and Cryptoworks cards
Y: { 01 }

# Empty RS232 buffer before writing
# 00 No reset
# 01 Reset Buffer (default)
E: { 01 }

# SoftCam Blocker/Filter definition
#
# 00 = Allow EMM (default for all)
# 01 = Block EMM addressed to:
# all card
# | shared address/provider
# | | unique address/hex_serial
# ----------------------------------
I: { 00 00 00 } Irdeto All SA UA
V: { 00 00 00 } Via - SA UA
S: { 00 00 00 } Seca - SA UA
N: { 00 00 00 } Nagra All SA UA
C: { 00 00 00 } Crypto All SA UA
O: { 00 00 00 } Conax - SA UA
D: { 00 00 00 } NDS All SA UA

# Timeout Definitions
#
T: { 00 02 01 } ATR timeout (normal*X), instruction timeout (normal*X)

# com1/com2 delays, all delays to be entered in decimal !
#
# Do NOT touch !!!!!!!!!!!!!!!!!!
# all timings should be 0, change only if you have problems.
T: { 01 00000 000 } Irdeto : byte delay (1e-6 s), instruction delay (1e-3 s)
T: { 02 00000 000 } Seca
T: { 03 00000 000 } Viaccess
T: { 04 00000 000 } Nagra
T: { 05 00000 000 } CryptoWorks
T: { 06 00000 000 } Geldkarte
T: { 07 00000 000 } Conax
T: { 08 00000 000 } NDS

# Use Crypto card bug to decode any CW, no matter of chid
#
# Cxxx configuration (is aktiv for the provider only if a config line is present)
# (ECM sample to be used to get the cw's with Cxxx)
#
# Provider provider chid - that is present on the card for that provider
# || || || ||
# UPC-Astra
8: { 8D } A4 4C 00 00 2E 20 00 2B 83 01 8D 8C 03 20 01 00 8E 02 00 00 C5 01 00 DB 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 DF 08 00 00 00 00 00 00 00 00
# Digiturk
8: { C1 } A4 4C 00 00 31 28 00 2E 83 01 C1 8C 03 89 19 19 8E 02 00 00 8F 01 A9 91 01 55 DB 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 DF 08 00 00 00 00 00 00 00 00


# Use constant CW's for
# caid pid CW0 ... CW1 ...
0: { 09 61 2E E5 { F0 07 84 7B F2 24 E9 FF 00 00 00 00 00 00 00 00 }
0: { 09 61 C3 57 { 86 FA 87 07 33 F2 AF D4 00 00 00 00 00 00 00 00 }
0: { 26 00 03 EB { 2D 4E 53 CE 6A 42 5F 0B 2D 4E 53 CE 6A 42 5F 0B }
0: { 26 00 03 E9 { 2D 4E 53 CE 6A 42 5F 0B 2D 4E 53 CE 6A 42 5F 0B }
0: { 26 00 03 EA { 2D 4E 53 CE 6A 42 5F 0B 2D 4E 53 CE 6A 42 5F 0B }
0: { 26 00 03 EC { 2D 4E 53 CE 6A 42 5F 0B 2D 4E 53 CE 6A 42 5F 0B }
0: { 26 00 03 ED { 2D 4E 53 CE 6A 42 5F 0B 2D 4E 53 CE 6A 42 5F 0B }
0: { 26 00 03 EE { 2D 4E 53 CE 6A 42 5F 0B 2D 4E 53 CE 6A 42 5F 0B }
0: { 26 00 03 EF { 2D 4E 53 CE 6A 42 5F 0B 2D 4E 53 CE 6A 42 5F 0B }
0: { 26 00 03 F0 { 2D 4E 53 CE 6A 42 5F 0B 2D 4E 53 CE 6A 42 5F 0B }
0: { 26 00 00 01 { 10 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00 }
0: { 26 00 00 04 { 18 AA 00 00 C2 D3 28 00 18 AA 00 C2 C2 D3 28 00 }
0: { 26 00 00 03 { B9 8A C0 00 DE 11 03 00 B9 8A C0 00 DE 11 03 00 }
0: { 26 00 00 05 { AB CD EF 67 FE DC BA 94 AB CD EF 67 FE DC BA 94 }
0: { 26 00 1F 06 { 11 11 11 33 11 11 11 33 11 11 11 33 11 11 11 33 }
0: { 26 00 00 63 { 13 24 35 6C AC BD EF 58 13 24 35 6C AC BD EF 58 }
0: { 26 00 00 06 { 10 10 10 30 10 10 10 30 10 10 10 30 10 10 10 30 }
0: { 26 00 00 07 { 1A 2B 3C 00 4D 5E 6F 00 1A 2B 3C 00 4D 5E 6F 00 }
0: { 26 00 00 67 { DB A5 45 00 FD E3 62 00 DB A5 45 00 FD E3 62 00 }
#MINSK TV 53E
#0: { 26 00 00 01 { 10 09 19 32 36 24 62 BC 10 09 19 32 36 24 62 BC }
#ENTV 22W
#0: { 26 00 00 04 { 11 00 00 00 00 00 00 00 11 00 00 00 00 00 00 00 }
#TV7 INDO 108E
#0: { 26 00 00 04 { 44 C4 DE 00 7B 94 32 00 44 C4 DE 00 7B 94 32 00 }



Acum despre fisierul cwshare.cfg :

in linia M: va trebui sa introduci numele tau[Only registered and activated users can see links. Click Here To Register...] ( sau adresa de Internet IP ) apoi parola ta din 8 caractere in format HEX ( adica: cifre 0-9 si litere A-F ).

* Important parola ta trebuie sa fie unica, deci sa nu se mai regaseasca in alta linie D. Nu faceti confuzie intre aceasta parola si parola [Only registered and activated users can see links. Click Here To Register...] , dreambox, sau router.
* Prin [Only registered and activated users can see links. Click Here To Register...] iti vei asigna numelui tau adresa de internet IP, asfel incit daca IP-ul tau internet se schimba vei actualiza [Only registered and activated users can see links. Click Here To Register...]-ul cu noul IP.

in linia D: vei introduce detaliile partenerului de share: nume dyndns, portul tau UDP, portul lui UDP, parola lui si parametrii de share.

* Portul tau UDP va trebui sa fie directionat catre IP-ul intern al dreambox-ului;
pentru aceasta va trebui sa folosesti Router si sa-l configurezi ca pachetele UDP care ajung pe portul dorit ( yyyy ) catre IP-ul tau de internet
sa fie directionate catre acelasi port UDP ( yyyy ) spre IP-ul local al dreambox-ului.

Cum sa construiesti linia ta D sa o poti da altor parteneri:

D: { numele_tau_dydns_sau_ip { xxxx yyyy { parola_ta { local_card_dist virtual_card_dist }}}}

in xxxx partenerul tau de share va introduce portul lui, las-o necompletata, ca si xxxx.
yyyy - este portul tau UDP.
parola_ta = parola din linia M.
local_card_dist = A5 aceasta este distanta la care vrei ca sa fie vizibil cardul tau local, A este pentru cartele speciale NDS, de ex: SKY UK/IT.
virtual_card_dist = A5 aceasta este distanta la care vrei sa fie vizibile cardurile tele virtuale care iti vin de la parteneri, A este pentru cartele speciale NDS, de ex: SKY UK/IT.

* Atentie sa nu confunzi linia ta D care o dai prietenilor tai cu liniile tale D din cwshare.cfg

* Atentie sa nu faci publice liniile tele D&M sau liniile D din cwshare

# start cwshare.cfg config file

# allow maximum 06 share level for recieved card data
I: { 06 }

# 01 repeat EMM's
# 00 consider every EMM only once
# 01 restart pid on overflow
# 1* reset ENX on every channel change
# *1 check/reset ENX freezes on FTA
# *2 check/reset ENX freezes on PayTV
# *3 check/reset ENX freezes on FTA and PayTV
# 00 write nothing in atack.txt
# 01 write into atack.txt: password is wrong
# 02 write into atack.txt: ID unknown
# 04 write into atack.txt: IP is wrong
# 08 write into atack.txt: port is worng
# 10 write into atack.txt: share.stat
# 20 create online.log for online/offline logging
# 3F write everything. (combine bits for other combinations)
# 4000 send ecm again after 4 Seconds if no reply.
# 6000 resync decode after 6 Seconds if net decode failed
N: { 00 01 03 1F 4000 6000 }

# Send ECM's at maximum 5 cards (please use this as default)
X: { 05 }

# Send ECM's in any case to these card ID's, even they are more then X:
# some examples ...
#G: { 17020000 1234 }
#G: { 0B000000 ABCD }
#G: { 05021510 AB34 }
#G: { 0D03A000 A234 }

# For W: please read the cwshare.txt, here only some examples
# use card 1 only for the following pids
#W: { 01 02 02 } 1022 100A 100B 102B 1009 101D 1029 1014 1011 101B
# don't use card 2 for the following pids
#W: { 02 03 03 } 1008 1016

# S: is the same as W:, just using the SID instead of the ECMPID

# cwshare.cfg --- dbox1 --- Internet und Lokales Netzt
#
# password
M: { mydbox2.homeip.net { AA242456 }}

# Internet Friends port range password cod
D: { friend1.homeip.net { 8010 8010 { B142AB11 { 5 5 }}}}
D: { friend2.homelinux.net { 8010 8010 { 81BFF901 { 5 5 }}}}

# other local boxes
D: { 192.168.0.51 { 8020 8020 { AB333441 { 5 5 }}}}
D: { 192.168.0.52 { 8020 8020 { BA334B24 { 5 5 }}}}

# end cwshare.cfg config file
G-Box Center este un utilitar care iti afiseaza informatii despre partenerii de share si cartelele virtuale

[Only registered and activated users can see links. Click Here To Register...]

Fereastra cu status-ul liniilor D, ver gbox, adresa IP... selecteaza o linie si apasa OK pentru a avea mai multe informatii

[Only registered and activated users can see links. Click Here To Register...]

Aici poti vedea cite cartele iti vin si de la ce distanta, teoretic distanta mai mica inseamna o viteza de raspuns mai buna

[Only registered and activated users can see links. Click Here To Register...]

Daca o cartela are Level 0 nu va mai fi redistribuita mai departe, cartelele cu Level 1 vor fi redistribuite o singura data, Level 2 de doua ori pina vor ajunge la level 0... etc

[Only registered and activated users can see links. Click Here To Register...]

Aici este afisat ce provideri pot fi accesati si cite cartele sunt in retea pentru fiecare provider

[Only registered and activated users can see links. Click Here To Register...]

Cum sa instalezi manual G-Box Center:

copiaza egboxcenterd in /var/bin si seteaza atributul 755
copiaza urmatoarele fisiere in /var/tuxbox/plugins
egboxcenter.cfg
egboxcenter.so -seteaza atributul 755

Apoi mergi in Blue Panel - Plugins si selecteaza G-Box Center pentru a-l porni

[Only registered and activated users can see links. Click Here To Register...]

Tips

* Daca vei avea atacuri de genul bad port o cauza poate fi faptul ca folosesti v 2.20-2.25 si primesti >1024 carduri. Foloseste PC log-er pentru a verifica aceasta problema.
Pentru a corecta eroarea ai doua optiuni:
instaleaza gbox v 2.1b sau
coboara valoarea parametrului I la 04 sau 03 astfel I: { 03 } si verifica parametrul X sa nu fie prea mare; valoarea narmala este X: { 05 }

* Daca in linia ta M vei introduce adresa ta sub forma de IP atunci nu poti avea in liniile D nume cu dyndns, doar IP-uri.

* Aici ai lista mea ident & ignore.
verifica cit de multe catele virtuale ai inainte si dupa ce instalezi ignore-ul; aceasta lista va ignora cardurile vechi sau false din retea.
[Only registered and activated users can see links. Click Here To Register...]

Instaleaza in dir: /var/keys si reporneste gbox-ul.

Multumiri speciale lui;
[Only registered and activated users can see links. Click Here To Register...]
pentru ca ne-a pus la dispozitie acest link;
[Only registered and activated users can see links. Click Here To Register...]

de unde am extras materialul de mai sus si nu in ultimul rand multumiri autorului;L_DM500s pe care din pacate nu am avut posibilitatea de a il contacta pentru a avea acordul publicarii acestui material,sper ca va intelege ca materialul acesta este de un real folos intregii lumi satelitare,inca o data multumiri!

e unul iti multumesc;am mai invatat ceva mai mult decat stiam eu.si felicitari!!!

Quote:

---

Originally Posted by sergiu [Only registered and activated users can see links. Click Here To Register...]

e unul iti multumesc;am mai invatat ceva mai mult decat stiam eu.si felicitari!!!

---

Multumesc,dar nu am facut mare lucru decat sa postez un material facut de altii in speranta ca va ajuta pe toti membri acestui forum care utilizeaza receivere cu linux printre care si eu.:)

:clap: :clap: :clap: :clap: :clap: :clap:
:gathering: :gathering: :gathering:
:drinks: :drinks: :drinks: :drinks: :drinks:
Perfect trebuia pus si aici oricum e de mare ajutor pentru toti utilizatorii!!!

Aceasta pagina este un mic ajutor pentru utilizatorii Dreambox & Gbox.
pagina realizata de L_DM500s.


Aici vei invata despre scripturi GBOX



Ce am facut pentru a imbunatati gbox-ul ptr mine:
Am realizat citeva script-uri care imi permit sa selectez distanta de unde gbox-ul primeste cartelele

[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]

aceasta poate fi util daca ai citeva servere bune la distanta mica dar si alte citeva cartele interesante la distanta mare si pe care vei dori sa le folosesti din cind in cind.

Poti folosi Auto-Cam pentru a automatiza procesul si a selecta automat scriptul corect dependent de distanta cardului ptr operator

[Only registered and activated users can see links. Click Here To Register...]

Idea este sa ai citeva fisiere cwshare_cfg configurate cu diferite linii I ( si X daca este necesar ):
Cu un text editor copy/paste si salveaza fisierul cu numele corect.
Copiaza scripturile in /var/script si seteaza atributul 755.
Copiaza toate fisierele cwshare in dir keys.
Reporneste DM-ul si apoi in Blue Panel vei putea vedea toate scripturile.

Am folosit 3 fisiere de configurare aproape identice, exceptie este parametrul de distanta I: { 0N }

cwsharb2.cfg are I: { 02 }
cwsharb3.cfg are I: { 03 }
cwsharb4.cfg are I: { 04 }

Atentie fisierul meu gbox este redenumit in gbox_21b deoarece foloesc si ver. gbox_225 cu alt script.

daca vei dori sa folosesti ambele versiuni de gbox: 2.1b &2.25 este necesara o versiune modificata a lui gbox_21b.

Atentie la linia rosie, aceasta linie va copia cwshare-ul corespunzator si va realiza schimbarea.

Acesa este scriptul ptr Gbox21b distanta 2.

file: gbox_21b2_cam.sh
###########################################################################
CAMNAME="Gbox21b dist2"
USERNAME=
ZAPTIME=6
CAMID=002
DVBSET=1
INFOFILE="ecm.info"

# This method cleans up /tmp folder of gbox files
remove_tmp ()
{
rm -rf /tmp/*info* /tmp/*gbox* /tmp/*online* /tmp/*share* /tmp/Newcs* /tmp/atack* /tmp/debug*
}

# This method starts cardserver_6.1 > CS2Gbox > Gbox (That order)
start_cam ()
{
cp -f /var/keys/cwsharb2.cfg /var/keys/cwshare.cfg
/var/bin/gbox_21b &
}

# This method stops newcs cs2gbox and gbox and then calles the tmp cleanup method
stop_cam ()
{
touch /tmp/gbox_21b.kill
/bin/prockill gbox_21b
remove_tmp
}

case "$1" in
start)
echo "[SCRIPT] $1: $CAMNAME"
start_cam
;;
stop)
echo "[SCRIPT] $1: $CAMNAME"
stop_cam
;;
restart)
echo "Restarting $CAMNAME"
stop_cam
start_cam
;;
*)
"$0" stop
exit 1
;;
esac

exit 0
###########################################################################

Acesa este scriptul ptr Gbox21b distanta 3:

file: gbox_21b3_cam.sh
###########################################################################
CAMNAME="Gbox21b dist2"
USERNAME=
ZAPTIME=6
CAMID=002
DVBSET=1
INFOFILE="ecm.info"

# This method cleans up /tmp folder of gbox files
remove_tmp ()
{
rm -rf /tmp/*info* /tmp/*gbox* /tmp/*online* /tmp/*share* /tmp/Newcs* /tmp/atack* /tmp/debug*
}

# This method starts cardserver_6.1 > CS2Gbox > Gbox (That order)
start_cam ()
{
cp -f /var/keys/cwsharb3.cfg /var/keys/cwshare.cfg
/var/bin/gbox_21b &
}

# This method stops newcs cs2gbox and gbox and then calles the tmp cleanup method
stop_cam ()
{
touch /tmp/gbox_21b.kill
/bin/prockill gbox_21b
remove_tmp
}

case "$1" in
start)
echo "[SCRIPT] $1: $CAMNAME"
start_cam
;;
stop)
echo "[SCRIPT] $1: $CAMNAME"
stop_cam
;;
restart)
echo "Restarting $CAMNAME"
stop_cam
start_cam
;;
*)
"$0" stop
exit 1
;;
esac

exit 0
###########################################################################

Acesa este scriptul ptr Gbox21b distanta 4:

file: gbox_21b4_cam.sh
###########################################################################
CAMNAME="Gbox21b dist2"
USERNAME=
ZAPTIME=6
CAMID=002
DVBSET=1
INFOFILE="ecm.info"

# This method cleans up /tmp folder of gbox files
remove_tmp ()
{
rm -rf /tmp/*info* /tmp/*gbox* /tmp/*online* /tmp/*share* /tmp/Newcs* /tmp/atack* /tmp/debug*
}

# This method starts cardserver_6.1 > CS2Gbox > Gbox (That order)
start_cam ()
{
cp -f /var/keys/cwsharb4.cfg /var/keys/cwshare.cfg
/var/bin/gbox_21b &
}

# This method stops newcs cs2gbox and gbox and then calles the tmp cleanup method
stop_cam ()
{
touch /tmp/gbox_21b.kill
/bin/prockill gbox_21b
remove_tmp
}

case "$1" in
start)
echo "[SCRIPT] $1: $CAMNAME"
start_cam
;;
stop)
echo "[SCRIPT] $1: $CAMNAME"
stop_cam
;;
restart)
echo "Restarting $CAMNAME"
stop_cam
start_cam
;;
*)
"$0" stop
exit 1
;;
esac

exit 0

###########################################################################



Am realizat o alta versiune de scripturi.

Pentru a folosi aceasta versiune inlocuieste in scripturile anterioare linia rosie cu liniile noi.
In aceasta noua versiune vei avea doar un singur fisier cwshare.cfg si parametrul I si X va fi inlocuit in functie de datele din fiecare script.
Aceasta este mult mai usor deoarece nu va trebui sa modifici fiecare fiser cfg dupa o mica schimbare.

- Acesa este scriptul ptr Gbox21b distanta 2 -
sed -e "s/I: { 0.*/I: { 02 }/" /var/keys/cwshare.cfg > /var/keys/cwshartmp.cfg
sed -e "s/X: { 0.*/X: { 05 }/" /var/keys/cwshartmp.cfg > /var/keys/cwshare.cfg
- Acesa este scriptul ptr Gbox21b distanta 3 -
sed -e "s/I: { 0.*/I: { 03 }/" /var/keys/cwshare.cfg > /var/keys/cwshartmp.cfg
sed -e "s/X: { 0.*/X: { 05 }/" /var/keys/cwshartmp.cfg > /var/keys/cwshare.cfg
- Acesa este scriptul ptr Gbox21b distanta 4 -
sed -e "s/I: { 0.*/I: { 04 }/" /var/keys/cwshare.cfg > /var/keys/cwshartmp.cfg
sed -e "s/X: { 0.*/X: { 05 }/" /var/keys/cwshartmp.cfg > /var/keys/cwshare.cfg

~ multumim autorilor care au realizat gbox sw pentru efort ~

Un tutorial interesant ptr acei care vor sa vada filmele de pe pc pe tv prin dreambox: [Only registered and activated users can see links. Click Here To Register...]

Am pus IP static,sa speram ca asa voi putea porni Gbox-ul mai incerc inca o data duminica.

Quote:

---

Originally Posted by spaniolul [Only registered and activated users can see links. Click Here To Register...]

Am pus IP static,sa speram ca asa voi putea porni Gbox-ul mai incerc inca o data duminica.

---

Interesant ,te-a costat ceva acest ip fix? De unde ai net?

Quote:

---

Originally Posted by gelu_dh [Only registered and activated users can see links. Click Here To Register...]

Interesant ,te-a costat ceva acest ip fix? De unde ai net?

---

Nu costa nimic,doar 2E la RTC

Quote:

---

Originally Posted by spaniolul [Only registered and activated users can see links. Click Here To Register...]

Nu costa nimic,doar 2E la RTC

---

Da asa am si eu credeam ca ai net din alta parte.La mine a durat 20 ore cca pana l-am obtinut.Am inteles ca alti operatori nu ofera ip fix,o fi adevarat?

Quote:

---

Originally Posted by spaniolul [Only registered and activated users can see links. Click Here To Register...]

Am pus IP static,sa speram ca asa voi putea porni Gbox-ul mai incerc inca o data duminica.

---

Daca faci un cont la no-ip sau dyndns (acesta din urma cu mari probleme) nu ai nici o treaba cu IP-ul ca e dynamic.Gbox trebuie sa porneasca.Deci,nu asta e problema ta.

Care este limita maxima de peers si cartele la gbox 2.1 B ? Sa stiu cand sa ma apuc de facut curatenie prin cwshare.

250 insa nu-ti recomanda atatia. o sa-ti mearga prost. eu ajunsesem la 160 si se misca foarte prost, de cand stau in jurul a o 100, totul e perfect. totul e sa-ti propui un numar de carduri ptr fiecare pachet (ex: max=7 carduri) si sa verifici sa mentii aceasta suma.
numarul cardurilor in varianta 2.1b fara patch ajung la 1024 (25), varianta cu patch permite mai multe. insa, daca ai un ignore list foarte bun si la zi, ai sa vezi ca stai undeva pe la 600 de carduri.
pe langa asta conteaza cum iti setezi si liniile x si i

va rog sa ma scuzati...dar nu reusesc sa verific sa vad daca gbox pe care l-am pus are atributul 755....

este cineva destul de rabdator sa-mi zica cum sa-l fac

cu stima
myky

Cu DCC te conectezi la receptor si in /var/bin dai click dreapta pe gbox_2.1b si acolo ai optiunea Attributes,dai click si setezi atribut 755.

...sau intrii telnet in folserul /var/bin si tastezi ls. Se va afisa continutul folderului si daca are atributul 755 se va afisa in culoarea verde fisierul.

pentru mmm1967 :



:

mmm1967 nu ai ce umbla la gbox_cfg ci doar la cwshare.cfg din var/key :
I: { 02 }
N: { 00 00 01 30 1000 2000 }
X: { 09 } W: { 01 01 01 } 1FFF
M: { host_meu { parola_mea_hexadecimal }}

D: { host_de_la_care_primesti { portulmeu5563 6000_portul_lui { parola_hostului_de la care primesti_in hexadecimal { A2 A2 }}}}
iar in var/bin sa dai atribut 755 gbox-ului mai departe cred ca stii ( aceasta setare se face in var/key in cwshare.cfg