Configurarea cardului N3 cu CCcam + Oscam

Printable View

Show 20 post(s) from this thread on one page

20-01-10, 16:06
sateros

Configurarea cardului N3 cu CCcam + Oscam

oscam.server

[reader]
label = Digitv
protocol = internal
detect = CD
device = /dev/sci0
group = 1
emmcache = 1,3,2
mhz = 368
ReconnectTimeout = 20
DisableServerFilter = 1
n3_boxkey = xxxxxxx <- boxkey
n3_rsakey = xxxxxxxxx <- rsakey

oscam.conf

[global]
Nice = -1
LogFile = stdout
MaxLogSize = 102400
Sleep = 0
FallbackTimeout = 2
ClientTimeout = 5
ClientMaxIdle = 120
CacheDelay = 150
WaitForCards = 1
PreferLocalCards = 1

[newcamd]
key = 0102030405060708091011121314
port = 15000@1802:002101,002111,000000

oscam.user

[account]
user = user
pwd = pass
group = 1
uniq = 0
caid = 1802

in CCcam.cfg

N: 127.0.0.1 15000 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
20-01-10, 16:35
delta2k2

Ai avut cum sa testezi si AU la card ?

Pentru n2 este suficient sa modifici doar liniile cu n3 si linia cu CAID ?

.
06-03-10, 00:23
iulian.n

comfigurarea cardului N3 cu cccam+Oscam

sal am un card digi full 1880 N3 lam comfig an oscam0.99.4+cccam 2.1.3

dar se antrerupe foarte des pe programe de la digi

as ruga daca poate cineva sa ma ajute

am urmatoarea comfigurare an oscam

var/tuxbox/comfig

oscam.comfig

[global]
Nice = -1
LogFile = stdout
MaxLogSize = 102400
Sleep = 0
FallbackTimeout = 2
ClientTimeout = 5
ClientMaxIdle = 120
CacheDelay = 150
WaitForCards = 1
PreferLocalCards = 1

[newcamd]
key = 0102030405060708091011121314
port = 15000@1880:000000

[cs357x]
Port = 10001

oscam server

[reader]
label = Digitv
protocol = internal
detect = CD
device = /dev/sci0
group = 1
emmcache = 1,3,2
mhz = 357
ReconnectTimeout = 20
DisableServerFilter = 1
n3_boxkey = xxxxxxxxxxx
n3_rsakey = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

oscam.user

[account]
user = N3
pwd = N3
group = 1
uniq = 0
caid = 1880

si an cccam cfg urmatoarea linie

L: 127.0.0.1 10001 N3 N3 1880 000000 ***

am un dreambox 500

rog daca cineva poate sa ma ajute sa mearga fara antrerupri cardu digi n3 caid 1880

multumesc mult

---------- Post added at 21:23 ---------- Previous post was at 21:01 ----------

sal am un card digi full n3 caid 1880 an oscam0.99.4+cccam2.1.3

problema este ca tot se antrerupe , ramane imaginea blocata cateva secunde apoi merge iar si tot asa foarte des pe programele digi

rog daca cineva ma poate ajuta

am un dm 500 si urmatoarea comfig oscam

oscam.comfig

[global]
Nice = -1
LogFile = stdout
MaxLogSize = 102400
Sleep = 0
FallbackTimeout = 2
ClientTimeout = 5
ClientMaxIdle = 120
CacheDelay = 150
WaitForCards = 1
PreferLocalCards = 1

[newcamd]
key = 0102030405060708091011121314
port = 15000@1880:000000

[cs357x]
Port = 10001

oscam.server

[reader]
label = Digitv
protocol = internal
detect = CD
device = /dev/sci0
group = 1
emmcache = 1,3,2
mhz = 357
ReconnectTimeout = 20
DisableServerFilter = 1
n3_boxkey = xxxxxx

n3_rsakey = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

oscam.user

[account]
user = N3
pwd = N3
group = 1
uniq = 0
caid = 1880

si an cccam cfg urmatoarea linie

L: 127.0.0.1 10001 N3 N3 1880 000000 256

as ruga daca cineva poate sa ma ajute sa nu se mai opreasca imaginea

doresc orice comfig numai sa mearga , am anteles ca ar merge bine an sbox daca cineva ami poate trimite cum sa comfig an sbox digi n3 1880

multumes mult
06-03-10, 01:26
Diablo1

sal

de ce iti dai linie L: ?
stergeo si probeaza cu N:

N: 127.0.0.1 15000 N3 N3 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
06-03-10, 13:57
iulian.n

comfigurarea cardului N3 cu cccam+Oscam

sal am probit cu linia

N: 127.0.0.1 15000 N3 N3 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

LINIA ESTE ACTIVA , AMI VEDE CARDU PE LINIE 1880:0 DAR NU DESCHIDE NICI UN PROGRAM DIGI CU LINIA L DESCHIDE DAR SE INTRERUP PROGRAMELE FOARTE DES SI STAU CATEVA SECUNDE APOI IAR PLEACA SI TOT ASA

CARE AR FI PROBLEMA ??

MENTIONEZ MERG CU OSCAM 0.99.4/CCCAM 2.1.3 COMFIG LA OSCAM ESTE POSTATA MAI JOS

MULTUMESC
11-03-10, 23:15
kangoo

Salutare,

Ma poate ajuta cineva la configurarea oscam-ccam pt un card digi galben. De doua zile incerc insa nu reusesc.

Multumesc pt orice ajutor.
15-03-10, 22:12
kangoo

Am revenit la problema mea. Am un card galben de DIGI si un dm800. Pe configuratia newcs+mgcamd cardul merge. De cateva zile incerc sa pun cardul pe oscam+cccam dar nu merge. Folosesc oscam 0.99.4 cu urmatoarea configuratie:

oscam.conf

Quote:

[global]
LogFile = stdout
MaxLogSize = 102400
Sleep = 0
FallbackTimeout = 2
ClientTimeout = 5
ClientMaxIdle = 120
CacheDelay = 150
WaitForCards = 1
PreferLocalCards = 1
# logging, nu e necesar, dar e bine sa vezi ce face oscam.

pidfile = /var/run/oscam.pid
logfile = /var/log/oscam.log
usrfile = /var/log/oscamuser.log
cwlogdir = /var/log/cw

[monitor]
Port = 988
NoCrypt = 192.168.1.1-192.168.1.250
AULow = 120
MonLevel = 2

[newcamd]
key = 0102030405060708091011121314
port = 15000@1880:000000

oscam. server

Quote:

#
#readerconfiguration
#
[reader]
label=Digitv
protocol=internal
detect=CD
device=/dev/sci0
group=1
emmcache=1,3,2
mhz=600
cardmhz=600
CAID=1880:000000
ReconnectTimeout=20
DisableServerFilter=1
n3_boxkey=xxxxxxxxxxxxxxxxxx
n3_rsakey=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

oscam.user

Quote:

[account]
user = user
pwd = password
group = 1
uniq = 0
caid = 1880

In fisierul oscam.log imi apare urmatoarele:

Quote:

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Mon Mar 15 20:55:38 2010
-------------------------------------------------------------------------------
2010/03/15 20:55:38 1137 s version=0.99.4svn, build #1015, system=mips-dreambox-linux
2010/03/15 20:55:38 1137 s max. clients=29, client max. idle=120 sec
2010/03/15 20:55:38 1137 s max. logsize=102400 Kb
2010/03/15 20:55:38 1137 s client timeout=5000 ms, fallback timeout=2000 ms, cache delay=150 ms
2010/03/15 20:55:38 1137 s shared memory initialized (size=477740, fd=3)
2010/03/15 20:55:39 1137 s auth size=4740
2010/03/15 20:55:39 1137 s Cannot open file "/var/tuxbox/config/oscam.services" (errno=2)
2010/03/15 20:55:39 1137 s userdb reloaded: 0 accounts freed, 1 accounts loaded, 0 expired
2010/03/15 20:55:39 1137 s signal handling initialized (type=sysv)
2010/03/15 20:55:39 1137 s can't open file "/var/tuxbox/config/oscam.srvid" (err=2), no service-id's loaded
2010/03/15 20:55:39 1137 s monitor: initialized (fd=8, port=988)
2010/03/15 20:55:39 1137 s camd 3.3x: disabled
2010/03/15 20:55:39 1137 s camd 3.5x: disabled
2010/03/15 20:55:39 1137 s cs378x: disabled
2010/03/15 20:55:39 1137 s newcamd: initialized (fd=9, port=15000, crypted)
2010/03/15 20:55:39 1137 s CAID: 1880
2010/03/15 20:55:39 1137 s provid #0: 000000
2010/03/15 20:55:39 1137 s radegast: disabled
2010/03/15 20:55:39 1137 s resolver thread started
2010/03/15 20:55:39 1137 s logger started (pid=1140)
2010/03/15 20:55:39 1137 s resolver started (pid=1141, delay=30 sec)
2010/03/15 20:55:39 1137 s reader started (pid=1142, device=/dev/sci0)
2010/03/15 20:55:39 1137 s Waiting for local card init ....
2010/03/15 20:55:39 1142 r02 card detected
2010/03/15 20:55:42 1142 r02 Forcing params.FI from 7 to 5
2010/03/15 20:55:42 1142 r02 ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2010/03/15 20:55:48 1142 r02 card system not supported
2010/03/15 20:55:48 1142 r02 card initializing error
2010/03/15 20:55:48 1137 s Init for all local cards done !
2010/03/15 20:55:48 1137 s anti cascading disabled
2010/03/15 20:55:48 1137 s client(1) connect from 127.0.0.1 (pid=1153, pipfd=14)
2010/03/15 20:55:49 1153 c01 encrypted newcamd:15000-client 127.0.0.1 granted (user, au=0)
2010/03/15 20:55:49 1153 c01 user user authenticated successfully (using client 4343)
2010/03/15 20:55:49 1153 c01 AU disabled for user user
2010/03/15 20:56:11 1153 c01 user (1880&000000/03F7/89:74C1): rejected user ident (158 ms)
2010/03/15 20:56:27 1153 c01 user (1880&000000/0DD4/89:E2E3): rejected user ident (150 ms)
2010/03/15 20:56:30 1153 c01 user (1880&000000/03F5/89:1CD2): rejected user ident (150 ms)
2010/03/15 20:56:33 1153 c01 user (1880&000000/03F2/89:0C01): rejected user ident (150 ms)
2010/03/15 20:56:36 1153 c01 user (1880&000000/0D20/89:D3BE): rejected user ident (150 ms)
2010/03/15 20:56:44 1153 c01 user (1880&000000/03F8/89:F658): rejected user ident (151 ms)
2010/03/15 20:58:26 1153 c01 user (1880&000000/055A/89:0036): rejected user ident (150 ms)
2010/03/15 20:58:30 1153 c01 user (1880&000000/04A1/89:5AE6): rejected user ident (150 ms)
2010/03/15 20:58:30 1153 c01 user (1880&000000/177A/89:9C69): rejected user ident (150 ms)
2010/03/15 20:58:33 1153 c01 user (1880&000000/03EB/89:BA32): rejected user ident (150 ms)
2010/03/15 20:58:36 1153 c01 user (1880&000000/0C58/89:3952): rejected user ident (150 ms)
2010/03/15 20:58:40 1153 c01 user (1880&000000/0CC6/89:8E6A): rejected user ident (151 ms)
2010/03/15 20:58:43 1153 c01 user (1880&000000/03ED/89:24AD): rejected user ident (150 ms)
2010/03/15 20:58:45 1153 c01 user (1880&000000/03E9/89:7B41): rejected user ident (150 ms)
2010/03/15 20:59:34 1153 c01 user (1880&000000/0BB8/89:528A): rejected user ident (150 ms)
2010/03/15 20:59:41 1153 c01 user (1880&000000/1770/89:6681): rejected user ident (151 ms)
2010/03/15 20:59:45 1153 c01 user (1880&000000/0BB8/89:C382): rejected user ident (150 ms)

In fisierul oscam.server am pus diferite frecvente (357, 368, 600 mhz) insa cardul nu se initializeaza.

Multumesc pt orice ajutor primit din partea voastra.
15-03-10, 22:30
delta2k2

@kangoo , incearcă şi cu o versiune mai nouă de oscam

De exemplu , [Only registered and activated users can see links. Click Here To Register...]

.
15-03-10, 23:51
kangoo

Salut,

Am pus ultima versiune de oscam, se pare ca citeste cardul si il initializeaza insa nu deschide nimica de pe card.

Fisierul oscam.log arata astfel:

Code:

------------------------------------------------------------------------------- >> OSCam << cardserver started at Mon Mar 15 22:43:59 2010 ------------------------------------------------------------------------------- 2010/03/15 22:43:59 1100 s version=0.99.4svn, build #1926, system=mips-dreambox-linux 2010/03/15 22:43:59 1100 s max. clients=29, client max. idle=120 sec 2010/03/15 22:43:59 1100 s max. logsize=102400 Kb 2010/03/15 22:43:59 1100 s client timeout=5000 ms, fallback timeout=2000 ms, cache delay=150 ms 2010/03/15 22:43:59 1100 s shared memory initialized (size=542884, fd=3) 2010/03/15 22:43:59 1100 s auth size=4752 2010/03/15 22:43:59 1100 s Cannot open file "/var/tuxbox/config/oscam.services" (errno=2) 2010/03/15 22:43:59 1100 s userdb reloaded: 0 accounts freed, 1 accounts loaded, 0 expired, 0 disabled 2010/03/15 22:43:59 1100 s signal handling initialized (type=sysv) 2010/03/15 22:43:59 1100 s can't open file "/var/tuxbox/config/oscam.srvid" (err=2), no service-id's loaded 2010/03/15 22:43:59 1100 s monitor: initialized (fd=8, port=988) 2010/03/15 22:43:59 1100 s camd 3.3x: disabled 2010/03/15 22:43:59 1100 s camd 3.5x: disabled 2010/03/15 22:43:59 1100 s cs378x: disabled 2010/03/15 22:43:59 1100 s newcamd: initialized (fd=9, port=15000, crypted) 2010/03/15 22:43:59 1100 s CAID: 1880 2010/03/15 22:43:59 1100 s provid #0: 002011 2010/03/15 22:43:59 1100 s provid #1: 002111 2010/03/15 22:43:59 1100 s provid #2: 002113 2010/03/15 22:43:59 1100 s provid #3: 000000 2010/03/15 22:43:59 1100 s cccam: disabled 2010/03/15 22:43:59 1100 s radegast: disabled 2010/03/15 22:43:59 1100 s resolver thread started 2010/03/15 22:43:59 1100 s logger started (pid=1102) 2010/03/15 22:43:59 1100 s resolver started (pid=1103, delay=30 sec) 2010/03/15 22:43:59 1100 s http started (pid=1104) 2010/03/15 22:43:59 1100 s reader started (pid=1105, device=/dev/sci0) 2010/03/15 22:43:59 1100 s waiting for local card init 2010/03/15 22:43:59 1104 h HTTP Server listening on port 0 2010/03/15 22:43:59 1105 r03 card detected 2010/03/15 22:43:59 1105 r03 Error activating card. 2010/03/15 22:44:01 1105 r03 ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28 2010/03/15 22:44:02 1105 r03 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.68 Mhz 2010/03/15 22:44:04 1105 r03 detect native NAGRA card T1 protocol 2010/03/15 22:44:26 1105 r03 card system not supported 2010/03/15 22:44:26 1105 r03 Normal mode failed, reverting to Deprecated Mode 2010/03/15 22:44:29 1105 r03 ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28 2010/03/15 22:44:30 1105 r03 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.68 Mhz 2010/03/15 22:44:32 1105 r03 detect native NAGRA card T1 protocol 2010/03/15 22:44:40 1105 r03 ----------------------------------------- 2010/03/15 22:44:40 1105 r03 |id |tier |valid from |valid to | 2010/03/15 22:44:40 1105 r03 +----+--------+------------+------------+ 2010/03/15 22:44:40 1105 r03 |2111|0065 |2010/02/28 |2010/07/02 | 2010/03/15 22:44:40 1105 r03 ----------------------------------------- 2010/03/15 22:44:40 1105 r03 ROM: D N A S P 1 8 0 2010/03/15 22:44:40 1105 r03 REV: M e r 0 0 0 2010/03/15 22:44:40 1105 r03 SER: xx xx xx xx 2010/03/15 22:44:40 1105 r03 CAID: 1880 2010/03/15 22:44:40 1105 r03 Prv.ID: 00 00 20 11 (sysid) 2010/03/15 22:44:40 1105 r03 Prv.ID: 00 00 00 00 2010/03/15 22:44:40 1105 r03 Prv.ID: 00 00 21 11 2010/03/15 22:44:40 1105 r03 [nagra-reader] ready for requests 2010/03/15 22:44:41 1100 s init for all local cards done 2010/03/15 22:44:41 1100 s anti cascading disabled 2010/03/15 22:44:41 1100 s dvbapi disabled 2010/03/15 22:44:41 1100 s client(1) connect from 127.0.0.1 (pid=1149, pipfd=15) 2010/03/15 22:44:41 1100 s client(2) connect from 127.0.0.1 (pid=1150, pipfd=16) 2010/03/15 22:44:41 1100 s client(3) connect from 127.0.0.1 (pid=1151, pipfd=17) 2010/03/15 22:44:41 1149 c01 Connection closed to client 2010/03/15 22:44:41 1150 c02 Connection closed to client 2010/03/15 22:44:41 1151 c03 Connection closed to client 2010/03/15 22:44:46 1100 s client(1) connect from 127.0.0.1 (pid=1157, pipfd=15) 2010/03/15 22:44:46 1157 c01 encrypted newcamd:15000-client 127.0.0.1 granted (user, au=0) 2010/03/15 22:44:46 1157 c01 user user authenticated successfully (using client 4343) 2010/03/15 22:44:46 1157 c01 AU disabled for user user 2010/03/15 22:44:51 1157 c01 user (1880&002011/041A/89:7490): not found (2833 ms) 2010/03/15 22:45:02 1157 c01 Connection closed to client 2010/03/15 22:45:02 1157 c01 user disconnected from 127.0.0.1 2010/03/15 22:45:02 1100 s client(2) connect from 127.0.0.1 (pid=1175, pipfd=16) 2010/03/15 22:45:02 1175 c02 encrypted newcamd:15000-client 127.0.0.1 granted (user, au=0) 2010/03/15 22:45:02 1175 c02 user user authenticated successfully (using client 4343) 2010/03/15 22:45:02 1175 c02 AU disabled for user user 2010/03/15 22:45:12 1175 c02 Connection closed to client 2010/03/15 22:45:12 1175 c02 user disconnected from 127.0.0.1 2010/03/15 22:45:12 1100 s client(1) connect from 127.0.0.1 (pid=1186, pipfd=15) 2010/03/15 22:45:12 1186 c01 encrypted newcamd:15000-client 127.0.0.1 granted (user, au=0) 2010/03/15 22:45:12 1186 c01 user user authenticated successfully (using client 4343) 2010/03/15 22:45:12 1186 c01 AU disabled for user user 2010/03/15 22:45:22 1186 c01 Connection closed to client 2010/03/15 22:45:22 1186 c01 user disconnected from 127.0.0.1 2010/03/15 22:45:22 1100 s client(1) connect from 127.0.0.1 (pid=1197, pipfd=15) 2010/03/15 22:45:22 1197 c01 encrypted newcamd:15000-client 127.0.0.1 granted (user, au=0) 2010/03/15 22:45:22 1197 c01 user user authenticated successfully (using client 4343) 2010/03/15 22:45:22 1197 c01 AU disabled for user user 2010/03/15 22:45:32 1197 c01 Connection closed to client 2010/03/15 22:45:32 1197 c01 user disconnected from 127.0.0.1 2010/03/15 22:45:32 1100 s client(2) connect from 127.0.0.1 (pid=1208, pipfd=16) 2010/03/15 22:45:32 1208 c02 encrypted newcamd:15000-client 127.0.0.1 granted (user, au=0) 2010/03/15 22:45:32 1208 c02 user user authenticated successfully (using client 4343) 2010/03/15 22:45:32 1208 c02 AU disabled for user user 2010/03/15 22:45:42 1208 c02 Connection closed to client 2010/03/15 22:45:42 1208 c02 user disconnected from 127.0.0.1 2010/03/15 22:45:42 1100 s client(1) connect from 127.0.0.1 (pid=1219, pipfd=15) 2010/03/15 22:45:42 1219 c01 encrypted newcamd:15000-client 127.0.0.1 granted (user, au=0) 2010/03/15 22:45:42 1219 c01 user user authenticated successfully (using client 4343) 2010/03/15 22:45:42 1219 c01 AU disabled for user user 2010/03/15 22:45:43 1219 c01 exit with signal 11 2010/03/15 22:45:43 1100 s client(1) connect from 127.0.0.1 (pid=1220, pipfd=15) 2010/03/15 22:45:43 1220 c01 encrypted newcamd:15000-client 127.0.0.1 granted (user, au=0) 2010/03/15 22:45:43 1220 c01 user user authenticated successfully (using client 4343) 2010/03/15 22:45:43 1220 c01 AU disabled for user user 2010/03/15 22:45:44 1220 c01 exit with signal 11 2010/03/15 22:45:44 1100 s client(1) connect from 127.0.0.1 (pid=1222, pipfd=15) 2010/03/15 22:45:44 1222 c01 encrypted newcamd:15000-client 127.0.0.1 granted (user, au=0) 2010/03/15 22:45:44 1222 c01 user user authenticated successfully (using client 4343) 2010/03/15 22:45:44 1222 c01 AU disabled for user user 2010/03/15 22:45:52 1222 c01 Connection closed to client 2010/03/15 22:45:52 1222 c01 user disconnected from 127.0.0.1 2010/03/15 22:45:52 1100 s client(2) connect from 127.0.0.1 (pid=1232, pipfd=16) 2010/03/15 22:45:52 1232 c02 encrypted newcamd:15000-client 127.0.0.1 granted (user, au=0) 2010/03/15 22:45:52 1232 c02 user user authenticated successfully (using client 4343) 2010/03/15 22:45:52 1232 c02 AU disabled for user user 2010/03/15 22:46:02 1232 c02 Connection closed to client 2010/03/15 22:46:02 1232 c02 user disconnected from 127.0.0.1 2010/03/15 22:46:02 1100 s client(1) connect from 127.0.0.1 (pid=1243, pipfd=15) 2010/03/15 22:46:02 1243 c01 encrypted newcamd:15000-client 127.0.0.1 granted (user, au=0) 2010/03/15 22:46:02 1243 c01 user user authenticated successfully (using client 4343) 2010/03/15 22:46:02 1243 c01 AU disabled for user user 2010/03/15 22:46:05 1243 c01 exit with signal 11 2010/03/15 22:46:05 1100 s client(1) connect from 127.0.0.1 (pid=1247, pipfd=15) 2010/03/15 22:46:05 1247 c01 encrypted newcamd:15000-client 127.0.0.1 granted (user, au=0) 2010/03/15 22:46:05 1247 c01 user user authenticated successfully (using client 4343) 2010/03/15 22:46:05 1247 c01 AU disabled for user user 2010/03/15 22:46:06 1247 c01 exit with signal 11 2010/03/15 22:46:06 1100 s client(1) connect from 127.0.0.1 (pid=1248, pipfd=15) 2010/03/15 22:46:06 1248 c01 encrypted newcamd:15000-client 127.0.0.1 granted (user, au=0) 2010/03/15 22:46:06 1248 c01 user user authenticated successfully (using client 4343) 2010/03/15 22:46:06 1248 c01 AU disabled for user user 2010/03/15 22:46:12 1248 c01 Connection closed to client 2010/03/15 22:46:12 1248 c01 user disconnected from 127.0.0.1 2010/03/15 22:46:12 1100 s client(2) connect from 127.0.0.1 (pid=1255, pipfd=16) 2010/03/15 22:46:12 1255 c02 encrypted newcamd:15000-client 127.0.0.1 granted (user, au=0) 2010/03/15 22:46:12 1255 c02 user user authenticated successfully (using client 4343) 2010/03/15 22:46:12 1255 c02 AU disabled for user user 2010/03/15 22:46:22 1255 c02 Connection closed to client 2010/03/15 22:46:22 1255 c02 user disconnected from 127.0.0.1 2010/03/15 22:46:22 1100 s client(1) connect from 127.0.0.1 (pid=1266, pipfd=15) 2010/03/15 22:46:22 1266 c01 encrypted newcamd:15000-client 127.0.0.1 granted (user, au=0) 2010/03/15 22:46:22 1266 c01 user user authenticated successfully (using client 4343) 2010/03/15 22:46:22 1266 c01 AU disabled for user user 2010/03/15 22:46:32 1266 c01 Connection closed to client 2010/03/15 22:46:32 1266 c01 user disconnected from 127.0.0.1 2010/03/15 22:46:32 1100 s client(1) connect from 127.0.0.1 (pid=1277, pipfd=15) 2010/03/15 22:46:32 1277 c01 encrypted newcamd:15000-client 127.0.0.1 granted (user, au=0) 2010/03/15 22:46:32 1277 c01 user user authenticated successfully (using client 4343) 2010/03/15 22:46:32 1277 c01 AU disabled for user user 2010/03/15 22:46:42 1277 c01 Connection closed to client 2010/03/15 22:46:42 1277 c01 user disconnected from 127.0.0.1 2010/03/15 22:46:42 1100 s client(1) connect from 127.0.0.1 (pid=1288, pipfd=15) 2010/03/15 22:46:42 1288 c01 encrypted newcamd:15000-client 127.0.0.1 granted (user, au=0) 2010/03/15 22:46:42 1288 c01 user user authenticated successfully (using client 4343) 2010/03/15 22:46:42 1288 c01 AU disabled for user user 2010/03/15 22:46:52 1288 c01 Connection closed to client 2010/03/15 22:46:52 1288 c01 user disconnected from 127.0.0.1 2010/03/15 22:46:52 1100 s client(2) connect from 127.0.0.1 (pid=1299, pipfd=16) 2010/03/15 22:46:52 1299 c02 encrypted newcamd:15000-client 127.0.0.1 granted (user, au=0) 2010/03/15 22:46:52 1299 c02 user user authenticated successfully (using client 4343) 2010/03/15 22:46:52 1299 c02 AU disabled for user user

Ma poate ajua cineva?
16-03-10, 00:06
delta2k2

Modifică , după care dai reboot :

[newcamd]
key = 0102030405060708091011121314
port = 15000@1880:002011,002111,000000

La useri , să fie caid = 1880

La server , momentan scoate linia cu CAID

.
16-03-10, 22:19
kangoo

Salut delta2k2,

Am modificat cum mi-ai recomandat tu, insa tot nu merge. Daca scot linia caid 1880 nu mai recunoaste cardul. Oscam.log arata asa:

Code:

------------------------------------------------------------------------------- >> OSCam << cardserver started at Tue Mar 16 21:14:13 2010 ------------------------------------------------------------------------------- 2010/03/16 21:14:13 1114 s version=0.99.4svn, build #1926, system=mips-dreambox-linux 2010/03/16 21:14:13 1114 s max. clients=29, client max. idle=120 sec 2010/03/16 21:14:13 1114 s max. logsize=102400 Kb 2010/03/16 21:14:13 1114 s client timeout=5000 ms, fallback timeout=2000 ms, cache delay=150 ms 2010/03/16 21:14:13 1114 s shared memory initialized (size=542884, fd=3) 2010/03/16 21:14:13 1114 s auth size=4752 2010/03/16 21:14:13 1114 s Cannot open file "/var/tuxbox/config/oscam.services" (errno=2) 2010/03/16 21:14:13 1114 s userdb reloaded: 0 accounts freed, 1 accounts loaded, 0 expired, 0 disabled 2010/03/16 21:14:13 1114 s signal handling initialized (type=sysv) 2010/03/16 21:14:13 1114 s can't open file "/var/tuxbox/config/oscam.srvid" (err=2), no service-id's loaded 2010/03/16 21:14:13 1114 s monitor: initialized (fd=8, port=988) 2010/03/16 21:14:13 1114 s camd 3.3x: disabled 2010/03/16 21:14:13 1114 s camd 3.5x: disabled 2010/03/16 21:14:13 1114 s cs378x: disabled 2010/03/16 21:14:13 1114 s newcamd: initialized (fd=9, port=15000, crypted) 2010/03/16 21:14:13 1114 s CAID: 1880 2010/03/16 21:14:13 1114 s provid #0: 002011 2010/03/16 21:14:13 1114 s provid #1: 002111 2010/03/16 21:14:13 1114 s provid #2: 000000 2010/03/16 21:14:13 1114 s cccam: disabled 2010/03/16 21:14:13 1114 s radegast: disabled 2010/03/16 21:14:13 1114 s resolver thread started 2010/03/16 21:14:13 1114 s logger started (pid=1116) 2010/03/16 21:14:13 1114 s resolver started (pid=1117, delay=30 sec) 2010/03/16 21:14:13 1114 s http started (pid=1118) 2010/03/16 21:14:13 1114 s reader started (pid=1119, device=/dev/sci0) 2010/03/16 21:14:13 1114 s waiting for local card init 2010/03/16 21:14:13 1119 r03 card detected 2010/03/16 21:14:13 1119 r03 Error activating card. 2010/03/16 21:14:15 1119 r03 ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28 2010/03/16 21:14:16 1119 r03 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.68 Mhz 2010/03/16 21:14:18 1119 r03 detect native NAGRA card T1 protocol 2010/03/16 21:14:23 1119 r03 ----------------------------------------- 2010/03/16 21:14:23 1119 r03 |id |tier |valid from |valid to | 2010/03/16 21:14:23 1119 r03 +----+--------+------------+------------+ 2010/03/16 21:14:23 1119 r03 |2111|0065 |2010/02/28 |2010/07/02 | 2010/03/16 21:14:24 1119 r03 ----------------------------------------- 2010/03/16 21:14:24 1119 r03 ROM: D N A S P 1 8 0 2010/03/16 21:14:24 1119 r03 REV: M e r 0 0 0 2010/03/16 21:14:24 1119 r03 SER: XX XX XX XX 2010/03/16 21:14:24 1119 r03 CAID: 1880 2010/03/16 21:14:24 1119 r03 Prv.ID: 00 00 20 11 (sysid) 2010/03/16 21:14:24 1119 r03 Prv.ID: 00 00 00 00 2010/03/16 21:14:24 1119 r03 Prv.ID: 00 00 21 11 2010/03/16 21:14:24 1119 r03 [nagra-reader] ready for requests 2010/03/16 21:14:24 1114 s init for all local cards done 2010/03/16 21:14:24 1114 s anti cascading disabled 2010/03/16 21:14:24 1114 s dvbapi disabled 2010/03/16 21:14:24 1114 s client(1) connect from 127.0.0.1 (pid=1133, pipfd=15) 2010/03/16 21:14:24 1133 c01 Connection closed to client 2010/03/16 21:14:31 1114 s client(1) connect from 127.0.0.1 (pid=1140, pipfd=15) 2010/03/16 21:14:31 1140 c01 encrypted newcamd:15000-client 127.0.0.1 granted (user, au=0) 2010/03/16 21:14:31 1140 c01 user user authenticated successfully (using client 4343) 2010/03/16 21:14:31 1140 c01 AU disabled for user user 2010/03/16 21:14:35 1140 c01 Connection closed to client 2010/03/16 21:14:35 1140 c01 user disconnected from 127.0.0.1 2010/03/16 21:14:35 1114 s client(2) connect from 127.0.0.1 (pid=1146, pipfd=16) 2010/03/16 21:14:35 1146 c02 encrypted newcamd:15000-client 127.0.0.1 granted (user, au=0) 2010/03/16 21:14:35 1146 c02 user user authenticated successfully (using client 4343) 2010/03/16 21:14:35 1146 c02 AU disabled for user user 2010/03/16 21:14:45 1146 c02 Connection closed to client 2010/03/16 21:14:45 1146 c02 user disconnected from 127.0.0.1 2010/03/16 21:14:45 1114 s client(1) connect from 127.0.0.1 (pid=1157, pipfd=15) 2010/03/16 21:14:45 1157 c01 encrypted newcamd:15000-client 127.0.0.1 granted (user, au=0) 2010/03/16 21:14:45 1157 c01 user user authenticated successfully (using client 4343) 2010/03/16 21:14:45 1157 c01 AU disabled for user user

Ce as mai putea incerca?
17-03-10, 12:46
barghy

Am avut si eu aceasta problema ( CCCam213+OSCAM 1851 pe GP 4.70 E1 ) cu "rejected user". Am incercat tot dar nu si-a revenit decit dupa ce am pus din nou imaginea si apoi emu si configurarile...Nu stiu care ar fi explicatia !
Succes !
10-04-10, 17:06
sateros

refresh

Fac un refresh pentru cei care au servere pe ubuntu cu smargo si folosesc combinatia CCcam +oscam
versiune oscam-0.99.4-SB-svn2033-i686-pc-linux-trunk
Am sa dau un exemplu pentru 3 carduri simultan Sky it Tivusat si digitv card rosu rom142 (dar merge cu toate cardurile de digi )
Desigur se poate folosi configuratia pentru fiecare card in parte nu neaparat toate trei
EXEMPLU

oscam.conf

# main configuration
#

[global]
nice = -1
WaitForCards = 1

#pidfile = /emu/run/oscam.pid
logfile = /emu/log/oscam.log
#usrfile = /emu/log/oscamuser.log
#cwlogdir = /emu/log/oscam/cw

[monitor]
port = 988
aulow = 120
monlevel = 4
nocrypt = 127.0.0.1,192.168.1.100-192.168.255.255

[
# protocols

[newcamd]
key = 2233555426969738891041786954
port =5411@183d:005411;2111@1802:002111

[cs357x]
Port = 10001@093b:000000

pentru sky (093b) am sa folosesc protocolul camd3 ca sa fie mai divers sa vedeti simultan 2 tipuri de protocoale newcamd si camd3 recomand camd3 e mult mai rapid reduce vizibil raspunsul la ecm )

093b:000000- reprezinta sky it cardul nou 02 ( cardul vechi 919 e 01 ) port 10001

183d:005411- reprezinta Tivusat port 5411

1802:002111- reprezinta digi tv card nagra3 1802 ( card nagra 2 1801) port 2111
PS
(Imi place sa folosesc caid la provider ca porturi la respectivele providere e mai usor cand configurezi ca sati dai seama despre ce card e vorba exemplu

1802:002111 digi tv port 2111)

Legatura in CCCam.cfg
la respectivele carduri si porturi

N: 127.0.0.1 2111 user digi 22 33 55 54 26 96 97 38 89 10 41 78 69 54 256 #newcamd
N: 127.0.0.1 5411 user tivusat 22 33 55 54 26 96 97 38 89 10 41 78 69 54 256 #newcamd
L:127.0.0.1 10001 user sky 093b 000000 256 #camd3

oscam.server

# Smargo Smartreader+

[reader]
label = SkyItalia
#protocol = mouse
device = 004:051
aeskey = 0102030405060708090a0b0c0d0e0f10
group = 1
caid = 093b
ident = 093b:000000
BoxID = xxxxxxxxx
#device = /dev/ttyUSB4
protocol = smartreader

#oscam.server
[reader]
label = tivusat
#protocol = mouse
protocol = smartreader
detect = cd
device = 004:052
#device = /dev/ttyUSB5
group = 2
emmcache = 1,3,0
tiger_rsakey = A92DA72FEEACF2947B003ED652153B189E4043B0138C368BDF6B9ED77DDAD6C0761A2198AEB3FC97A19C9D01CA769B3FFFE4 F6E70FA4E0696A8980E18D8C58E11D817121346E3E66457FDD84CFA72589B25B538EFC304361B54845F39E9EFA52D805E5FD 86B595B366C35716ABC91FA3DC159C9F4D8164B5
n3_boxkey = A7642F57BC96D37C
ident = 183D:5411
caid = 183D
mhz = 368
cardmhz = 368

#oscam.server
[reader]
label =digitv
#protocol = mouse
protocol = smartreader
detect = cd
device = 004:054
#device = /dev/ttyUSB6
group = 3
emmcache = 1,3,0
n3_rsakey = xxxxxxxxxxxxxxxx
n3_boxkey = xxxxxxxxxxxxxxxx
ident = 1802:2111
caid = 1802
mhz = 368
cardmhz = 368

Explicatie pentru reader
device = 004:054
#device = /dev/ttyUSB6

Pentru versiunile de Oscam SB se foloseste

device = 004:054
ma refer la configuratia cu Smargo
bus:device
004:054
se obtine in felul urmator
comanda
lsusb
raspuns
Bus 004 Device 054: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
pentru celelate versiuni se foloseste
device = /dev/ttyUSBx
MA REFER EXCLUSIV LA SMARGO

oscam.user

[account]
user = user
pwd = sky
monlevel = 4
uniq = 1
group = 1
caid = 093b
ident = 093b:000000
AU = SkyItalia

[account]
user = user
pwd = tivusat
monlevel = 1
uniq = 3
group = 2
caid = 183D
ident = 183D:005411
#AU = tivusat

[account]
user = user
pwd = digi
monlevel = 1
uniq = 2
group = 3
caid = 1802
ident = 1802:002111
AU = digitv

ET VOILA

2010/04/10 12:37:39 26791 s version=0.99.4svn, build #2033, system=i686-pc-linux, nice=-1
2010/04/10 12:37:39 26791 s max. clients=509, client max. idle=120 sec
2010/04/10 12:37:39 26791 s max. logsize=unlimited
2010/04/10 12:37:39 26791 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2010/04/10 12:37:39 26791 s shared memory initialized (size=4196102, id=67567628)
2010/04/10 12:37:39 26791 s auth size=4752
2010/04/10 12:37:39 26791 s Cannot open file "/usr/local/etc/oscam.services" (errno=2)
2010/04/10 12:37:39 26791 s userdb reloaded: 0 accounts freed, 3 accounts loaded, 0 expired, 0 disabled
2010/04/10 12:37:39 26791 s signal handling initialized (type=sysv)
2010/04/10 12:37:39 26791 s can't open file "/usr/local/etc/oscam.srvid" (err=2), no service-id's loaded
2010/04/10 12:37:39 26792 s monitor: initialized (fd=6, port=988)
2010/04/10 12:37:39 26792 s camd 3.3x: disabled
2010/04/10 12:37:39 26792 s camd 3.5x: initialized (fd=7, port=10001)
2010/04/10 12:37:39 26792 s cs378x: disabled
2010/04/10 12:37:39 26792 s newcamd: initialized (fd=8, port=5411, crypted)
2010/04/10 12:37:39 26792 s CAID: 183D
2010/04/10 12:37:39 26792 s provid #0: 005411
2010/04/10 12:37:39 26792 s newcamd: initialized (fd=9, port=21111, crypted)
2010/04/10 12:37:39 26792 s CAID: 1802
2010/04/10 12:37:39 26792 s provid #0: 002111
2010/04/10 12:37:39 26792 s cccam: disabled
2010/04/10 12:37:39 26792 s radegast: disabled
2010/04/10 12:37:39 26792 s logger started (pid=26793)
2010/04/10 12:37:39 26792 s resolver started (pid=26794, delay=30 sec)
2010/04/10 12:37:39 26792 s reader started (pid=26795, device=004:051, detect=cd, mhz=357, cardmhz=357)
2010/04/10 12:37:39 26792 s reader started (pid=26796, device=004:052, detect=cd, mhz=368, cardmhz=368)
2010/04/10 12:37:39 26792 s reader started (pid=26797, device=004:054, detect=cd, mhz=368, cardmhz=368)
2010/04/10 12:37:39 26792 s waiting for local card init
2010/04/10 12:37:39 26795 r02 Found smartreader device 004:051
2010/04/10 12:37:39 26797 r04 Found smartreader device 004:054
2010/04/10 12:37:39 26796 r03 Found smartreader device 004:052
2010/04/10 12:37:39 26795 r02 card detected
2010/04/10 12:37:39 26797 r04 card detected
2010/04/10 12:37:39 26796 r03 card detected
2010/04/10 12:37:44 26795 r02 ATR: 3F FD 13 25 02 50 80 0F 33 B0 13 69 FF 4A 50 D0 80 00 49 54 03
2010/04/10 12:37:44 26797 r04 ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 30 32 16
2010/04/10 12:37:45 26795 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 4.80 Mhz
2010/04/10 12:37:45 26797 r04 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.43 Mhz
2010/04/10 12:37:46 26795 r02 [videoguard2-reader] type: VideoGuard Sky Italia new (093B)
2010/04/10 12:37:46 26797 r04 detect native NAGRA card T1 protocol
2010/04/10 12:37:46 26795 r02 [videoguard2-reader] type: VideoGuard, caid: 093B, serial: 014E5F86, BoxID: 14088A36
2010/04/10 12:37:46 26795 r02 [videoguard2-reader] ready for requests
2010/04/10 12:37:46 26795 r02 [videoguard2-reader] card detected
2010/04/10 12:37:46 26795 r02 [videoguard2-reader] type: VideoGuard
2010/04/10 12:37:46 26795 r02 [videoguard2-reader] tier: 000b, expiry date: 2010/05/20-00:00:00 Service
2010/04/10 12:37:46 26795 r02 [videoguard2-reader] tier: 021b, expiry date: 2010/05/20-00:00:00 Cinema
2010/04/10 12:37:46 26795 r02 [videoguard2-reader] tier: 0226, expiry date: 2010/05/20-00:00:00 Mondo
2010/04/10 12:37:46 26795 r02 [videoguard2-reader] tier: 022e, expiry date: 2010/05/20-00:00:00 Music & News
2010/04/10 12:37:46 26795 r02 [videoguard2-reader] tier: 02fe, expiry date: 2010/05/20-00:00:00 PPV
2010/04/10 12:37:46 26797 r04 -----------------------------------------
2010/04/10 12:37:46 26797 r04 |id |tier |valid from |valid to |
2010/04/10 12:37:46 26797 r04 +----+--------+------------+------------+
2010/04/10 12:37:46 26797 r04 |2111|0065 |2010/04/01 |2010/07/30 |
2010/04/10 12:37:46 26797 r04 |2111|0081 |2010/04/01 |2010/07/30 |
2010/04/10 12:37:46 26797 r04 -----------------------------------------
2010/04/10 12:37:47 26796 r03 ATR: 3F FF 95 00 FF 91 81 71 FF 47 00 54 49 47 45 52 30 30 33 20 52 65 76 32 35 30 64
2010/04/10 12:37:47 26797 r04 ROM: D N A S P 1 4 2
2010/04/10 12:37:47 26797 r04 REV: R e v G 0 2
2010/04/10 12:37:47 26797 r04 SER: 4C E9 1D C8
2010/04/10 12:37:47 26797 r04 CAID: 1802
2010/04/10 12:37:47 26797 r04 Prv.ID: 00 00 20 11 (sysid)
2010/04/10 12:37:47 26797 r04 Prv.ID: 00 00 00 00
2010/04/10 12:37:47 26797 r04 Prv.ID: 00 00 21 11
2010/04/10 12:37:47 26797 r04 [nagra-reader] ready for requests
2010/04/10 12:37:47 26796 r03 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.43 Mhz
2010/04/10 12:37:48 26796 r03 detect NAGRA tiger card
2010/04/10 12:37:48 26796 r03 type: NAGRA, caid: 183D, IRD ID: FF 4A 20 DB
2010/04/10 12:37:48 26796 r03 ProviderID: 00 00 54 11
2010/04/10 12:37:49 26796 r03 ROM: T I G E R 0 0 3
2010/04/10 12:37:49 26796 r03 REV: R e v 2 5 0
2010/04/10 12:37:49 26796 r03 SER: 41 1F 30 C4
2010/04/10 12:37:49 26796 r03 CAID: 183D
2010/04/10 12:37:49 26796 r03 Prv.ID: 00 00 54 11 (sysid)
2010/04/10 12:37:49 26796 r03 [nagra-reader] ready for requests
2010/04/10 12:37:59 26864 c01 usersky (093B&000000/2B5D/91:88DE): found (116 ms) by skyitalia
2010/04/10 12:41:32 26865 c02 usertvusat (183D&005411/0006/8C:EBB3): found (153 ms) by tivusat
2010/04/10 12:41:57 26866 c03 userdigitv (1802&002111/03E9/92:9E10): found (307 ms) by digitv

schimbati user si pass pe placere
10-04-10, 18:28
wambertos

Excelent! Mi-ai dat o idee cu care am rezolvat o mare problema!
Si anume este vorba despre cardul ORF(0D95) care mai decodeaza
pe linga canalele ORF inca 3 canale: Puls 4,ATV si Austria 9 TV.
Ultimele 3 canale nu functioneaza prin protocolul newcamd.
Le-am pus pe camd3 si acum merg toate !
In plus, cum ai spus si tu, ecm time s-a redus de la vreo 220ms la 170ms (la client)
in timp ce oscam le deschide local in 160ms (Smargo Fixed la 9,61).
Deci voi folosi protocolul camd3 pe viitor, cel putin in cazul combinatiei oscam+cccam.
10-04-10, 22:15
szili_boy

Bine ca ai pus configul pentru cei care nu stie sa configureze OSCam-ul, eu nu fac parte din grupul respectiv. Insa mai ajutat si pe mine cu CAMD3.

Odata mai demult am testat si eu prin protocolul camd3 dar avea aceeasi viteza ca prin newcamd. In Timeline-ul OSCam-ului am vazut ca baietii lucreaza intens pe acest protocol, dar n-am crezut ca asta scade si ecm time-ul spre CCCam. Acuma prin camd3 am aceeasi ecm time in CCCam ca in OSCam. Pe newcamd in OSCam era cu ~50ms mai mult.
Mersi de info ;)

OSCam Rules !!!
13-04-10, 01:12
proteus

Cum ai compilat cu suport de smartreader (protocol = smartreader)? Ca la mine se plange ca trebuie sa re-compilez cu suport de smartreader, momentan imi merge numai cu protocol = mouse.

Am cautat pe Net, dar nu am gasit multe informatii, sau pagini in Germana pe care nu o inteleg. Folosesc oscam 9.44a, compilat din surse pe un Linux CentOS 5. Am pachetele libusb si libusb-dev instalate pe sistem.
13-04-10, 02:13
sateros

merge numai la versiunile Oscam SB protocol = smartreader am scris mai sus in rest numai
protocol = mouse
13-04-10, 02:55
proteus

Ce e "Oscam SB", pot sa-l compilez la fel ca si oscam-ul "normal"?
13-04-10, 09:10
sateros

versiune oscam-0.99.4-SB-svn2033-i686-pc-linux-trunk
foloseste asta din exemplu
13-04-10, 11:23
proteus

Din pacate nu pot folosi binarele lor precompilate, pentru ca folosesc CentOS 5 si oscam se plange ca nu are versiunea de glibc care-i place lui (CentOS e clona de RedHat Enterprise si e mai conservator la versiunile de kernel si biblioteci).

Daca se poate, imi poti spune de unde pot lua codul sursa pt. SB si cum trebuie compilat? Multumesc.

Show 20 post(s) from this thread on one page