Update focus

Iata ca dupa o lunga vreme ma aflu din nou in imposibilitatea de a mai face update la cardul focus.
Am incercat cu oscam, chiar si cu metoda oscam+mgcamd care ma salva mereu.
nimic!

am pus si scam , dar nu cred ca face nimic pe gigablue. niciodata nu mi-a functionat aceasta metoda.
am un gigablue 800 se cu openATV 5.0.
a mai patit-o careva?

Code:

---

[global]
logfile                      = /tmp/oscam.log
fallbacktimeout              = 2600
nice                          = -1
maxlogsize                    = 2048
waitforcards                  = 0
preferlocalcards              = 2
dropdups                      = 1
block_same_name              = 0
lb_mode                      = 1
lb_save                      = 100
lb_nbest_readers              = 2
lb_retrylimit                = 500
lb_max_readers                = 3
lb_auto_betatunnel_prefer_beta= 105
lb_savepath                  = /tmp/.oscam/stat
lb_retrylimits                = 1702:900,098C:1500,1880:600
lb_nbest_percaid              = 1880:3


[anticasc]
enabled                      = 1
numusers                      = 1
penalty                      = 3
aclogfile                    = /tmp/ac.log


[cache]


[newcamd]
port                          = 12010@0B02:000000
key                          = 0102030405060708091014131211
keepalive                    = 1
mgclient                      = 1


[cccam]
port                          = 12000
nodeid                        = CBBA51F6106C157C
version                      = 2.3.0
reshare                      = 2
stealth                      = 1


[dvbapi]
enabled                      = 1
pmt_mode                      = 6
au                            = 1
user                          = gigablue
boxtype                      = dreambox

---

Asta configul pe care l-am folosit intotdeauna si a mers pana acum.
primeste emm , dau refresh entitlements...nimic.
Am si reincarcat sambata. tot aia.
am incercat si oscam+mgcamd , la fel...
config mgcamd si newcamd :

Code:

---

# EMM messages
#    00 don't show any EMMs (default)
#    01 show only valid EMMs
#    02 show valid and bad EMMs with complete data display
M: { 01 }


# ECM messages
#    00 don't show anything about ecm
#    01 normal mode, show pids processed, decoded ecm and cw
#    02 verbose mode, show valid and bad ECMs with data
C: { 02 }


# AU
#    00 disable, no emm pids processed
#    01 enable, emm pids always processed for soft-au and shared cards
#    02 auto, emm started only if channel cant be decoded
#    03 process emm pids for network cards update only
A: { 01 }


# key update (sum 01 or 02 with 04)
#    01 update only new keys, default setting
#    02 update all keys (used for valid PMK checking)
#    04 enable TPS au
#    + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0


# config files folder (softcam, autoroll, ignore/priority)
#    00 files in /var/keys
#    01 files in /tmp
T: { 00 }


# network mode, use summ for several clients
#    00 no network (default)
#    01 newcamd netclient
#    02 radegast netclient
#    04 camd3 netclient
#    08 gbox netclient
G: { 01 }


# network retry, use summ for several options
#    00 disable
#    01 retry every new ecm
#    02 try to connect to offline shares every Q: seconds
#    04 try to detect and fast reconnect to lost (and not used atm) server
#    + XX messages number and YY seconds to reconnect
#    mg will reconnect to server, if no answer to last XX ecm/keepalive or
#    if no answer for last ecm or keepalive sent for YY seconds
#    set to 0 to disable
N: { 07 } 5 30


# network ecm timeout in seconds
K: { 05 }


# newcamd dead routes connect retry, sec
Q: { 600 }


# network shares priority
# 00 gbox, newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd, gbox
# 02 newcamd, camd3, gbox, radegast
P: { 00 }


# on screen display type
#    00 No OSD (default)
#    01 neutrino
#    02 enigma
#    03 relook
#    + user password for http auth
O: { 00 } username password


# on screen display Options, summ of:
#    01 show emu ecm
#    02 show network shares messages
#    04 show decoding failed / fta
#    08 show emm keys update
#    + web port to use for osd
S: { 03 } 80


# Log option, summ of:
#    00 off
#    01 network udp log
#    02 log to console
#    04 file, appended ! delete it by yourself, before it eat all your hdd
#    + IP udp-port log-file-name
L: { 03 } 172.16.1.1 28007 /tmp/mgcamd.log


# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }


# cache option, summ of:
#    00 Off (default)
#    01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
#    02 Ecm data cache, remember CW for (E:) time
#    04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }


# reread files, summ of:
#    00 No (default)
#    01 reread config file on channel change (including priority and ignore, but not replace/cache)
#    02 reread SoftCam.Key on channel change
#    04 reread SoftCam.Key if file changed
R: { 00 }


# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }


# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
B: { 06 }

---

Code:

---

CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 21000
CWS = 192.168.0.194 12010 update 1234 01 02 03 04 05 06 07 08 09 10 14 13 12 11

---

In receptorul de la focos n-ai incercat?Sau in altul care stie conax...

nu am si nici nu stiu pe nimeni care sa aiba :(
am mai avut probleme in trecut, dar mereu functiona oscam+mgcamd.

Eu am trecut la CCcam de la Oscam.
Dar pentru update am un scam cu ceva cifre dupa el.Verific acasa si iti spun.Ideeea este ca pe data de 2 ale luni sa il treci pe acel soft (scam....) selectezi TVR 1 si il lasi ceva timp (eu il las 15 minute) si apoi vezi restul.
Cel mai bun la update la mine a fost Amiko A3.

din ce stiu eu scam nu a functionat niciodata pe gigablue 800 se.
il incerc si pe asta , dar ma indoiesc ca face ceva din moment ce prin oscam+mgcamd primesc EMM shared si tot nu se actualizeaza nimic.

Poate e de la versiunea de oscam. Am patit-o recent, pune unul nitel mai vechi.
Nu ai pus cfg de server si de user (dvbapi)
Ce apare acum la entitlement?
Ultimul AU l-am facut cu oscam r10957, anterior lui au fost niste versiuni cu care am avut probleme la AU

• Entitlements for focus

Cardsystem			Valid To		IRD ID (nagra)	Maturity	Provider
conax			n/a		FF FF FF FF	n/a	00 00 00 00 (sysid)
Serial		Rom		ATR
XX XX XX				3B 24 00 30 42 30 30
Type	Caid	Provid	ID	Class	Start Date	Expire Date	Name

cam asta...si nu pare ok deloc

Vezi ca ai postat seria cardului in hex!!
Arata si restul de setari si vers de oscam

• r10978 am pus acum.aveam 1094x si ceva... nu mai stiu exact ultima cifra