Dvb Viewer

Deci dacă e "By Ahmad", luati cu incredere! Sigur are carcalaci ascunși!

Sent from my A0001 using Tapatalk

Orice versiune ''neoriginala'' are ''carcalaci'' mai bine sau mai prost ''ascunsi''

DVBVierwer_v5.6.0_Crack_0.rar (2 MB)

[Only registered and activated users can see links. Click Here To Register...]

-----------------------------------------------------------------------------------

DVBViewer Pro v5.6.0 Full Version

[Only registered and activated users can see links. Click Here To Register...]


-----------------------------------------------------------------------------------

DVBViewer Pro v5.6.0 TAKKI EDITION

There's a takki's edition at this link

[Only registered and activated users can see links. Click Here To Register...]

Pass: satdvb-team.com/vb

DVBViewer Pro 6.1.5.2 (Hotfix Release)

-Fix: Hardware: Switching between the reception modes DVB-S / T / C did not work with the TBS 5580 USB Box.
-Fix Hardware: With TBS devices, the automatic detection of DVB-T2 as well as DVB-T2 (MPLP) sub-streams did not work during the search. No sub-streams except the first could be received.
-Complemented: General: Basic support for the Chinese video format AVS (including AVS + and AVS2) and the audio format DRA. Channels using this format are found during the search and can be received and recorded, but not yet played back (see here).
-Changed: Picture in Picture: Improved handling of resizing the separate picture-in-picture window when it is snapped to the edge of the screen.

DVBViewer_setup.exe.zip
Código:
[Only registered and activated users can see links. Click Here To Register...]

DVBViewer Pro 6.1.6

Added: Subtitle Options: Checkbox “Use teletext font for teletext, ATSC and ISDB subtitles” (default unchecked). If switched on, DVBViewer uses the (usually mono-spaced) font specified on the Teletext Options page for the mentioned subtitle types, which are typically output in a grid with fixed character positions. If switched off, DVBViewer uses the font selected on the Subtitle Options page and particularly displays teletext subtitles with variable spacing in case of a proportional font, thus enhancing the appearance and readability. However, not aligning the output to the teletext character grid may also have disadvantages (see here).
Added: Subtitle Options: Settings for adjusting the synchronization of subtitles with video. The value in the delay input line lets the subtitles appear x milliseconds later, or earlier in case of a negative delay. Checkboxes allow to separately switch the delay on and off for different subtitle types. A change takes effect immediately, but is reset on channel switching, stopping the video or if the Options Window is closed, unless clicking Apply makes it permanent.
Removed: Subtitle Options: Checkboxes in the Appearance section for switching shadow, outline and background transparency off. This can as well be achieved by moving the sliders to their leftmost position.
Removed: Teletext Options: Sliders for adjusting background transparency and outline of teletext subtitles. The functionality is now covered by correspondent sliders on the Subtitle Options page.
Fix: Hardware Options: Updated device list entries were not marked as available after “Scan Devices”, causing tuners, that were displayed in red due to a wrong device name, to remain red, though the name was corrected. “Scan Devices” did not add the SRx1000 entry (read from an updated hardware database) to an already existing DVB-C tuner in the file hardware.xml.
Added: Hardware Options: The TS Stream device settings dialog contains a new input line “Replace in URL”, allowing to vary the processed URL per device. It applies to HLS, internet radio and transport streams wrapped in HTTP(S). The syntax is [placeholder]=[device specific string], e.g. @@=username : password. A use case is described here (IPTV provider requiring x different accounts for receiving x streams simultaneously).
Fix: Hardware: If TBS 5520/5580 multistandard devices were configured and used for ISDB-T reception, DVBViewer switched the tuners to DVB-T mode on tuning (see here).
Fix: EPG: The erroneous “\n” inserted by some Austrian providers as line break indicator is now automatically replaced by a DVB compliant line break on EPG data reception.
Change: EPG: Auto-detection of the ISO 6937 and ISO 8859-2 character sets for some East European countries (particularly Poland, Romania, Hungary) where providers indicated them wrongly in the past years. DVBViewer now first assumes ISO 6937 and then tries to find a proof for ISO-8859-2 (previously the other way round). This handles true ISO 6937 always correctly, but may fail in certain cases where ISO-8859-2 is used with missing indication (see here).
Fix: EPG Window: When opened for the first time between 00:00 and 00:15 o'clock, the timeline showed an empty EPG for Saturday, 30 December 1899 (see here).
Fix: Channel Editor: Issues when using the New button while an audio sub-node is selected or after it was selected. The input form was not adjusted to the parent reception type or controls remained deactivated though a category was selected subsequently.
Added: TS Stream: Support for channels broadcasting via internet in HLS format with audio tracks provided as separate streams.
Added: TS Stream: Tweak “Receive all audio tracks of HLS streams” (→ launch Tweaker.exe). If switched on DVBViewer fetches all available audio tracks of HLS streams from the server, thus occupying more bandwidth. If switched off only the main audio track (marked as default by the provider) is fetched.
Fix: DVD Playback: Resuming playback at the last position could fail due to potential timing issues when retrieving the Disc ID.
Fix: Recorder. Lazy program response caused by uselessly repeated tune attempts once per second in case of a whole transponder recording, if the allocated device was not usable for this purpose. This particularly applied to all RTSP network devices, that by default are not configured for delivering a whole transponder. DVBViewer did not realize this until tuning was performed. Now only devices are allocated for such recordings, that either deliver the whole transponder anyway (most BDA devices) or can automatically be configured for it (unused RTSP network devices). However, whole transponder recording with RTSP devices may still be hindered by servers that do not support the pids=all parameter or by insufficient network bandwidth.
Fix: Main Window: Horizontal resizing of the Radio Window did not work correctly, if the mode was selected manually in the View menu (not by Options → TV/Radio → Auto-switch to TV/Radio Window.... ).
Added: Zoom Presets: Tweak “Number of zoom presets” (→ launch Tweaker.exe). It can be used to change the number of zoom presets. Four presets are set up by default. The Preset #x button in the Settings -> Zoom window or the "Zoom Next Preset" action switch over to the next preset.
Fix: HbbTV: Issues with Swiss HbbTV (see here) and other channels using erroneous JavaScript or broadcasting a HbbTV Application Information Table (AIT) with more than one section (particularly“Das Erste” in Germany).
Fix: HbbTV: If the tweak “Use browser cache for HbbTV” (see Tweaker.exe) was switched off, DVBViewer failed to clear the HbbTV cache completely, because files were still in use. Clearing the cache is now done right after DVBViewer start.
Fix: Component Downloader: Bug causing error code 406 in the server response on DVBViewer installation and when using the downloader separately.

DVBViewer Pro 6.1.6.1 (Hotfix Release)

Fix: Component Downloader: The bug causing error code 406 was still present due to a wrong file version in the 6.1.6 setup.
Fix: TS Stream: In case of channels broadcasting via internet in HLS format with separate audio streams audio was not played correctly under certain timing conditions.
Fix: TS Stream: The host field in the HTTP header was not set correctly, possibly causing an error message from the server.


DVBViewer_6.1.6.1_setup.exe.zip
Código:
[Only registered and activated users can see links. Click Here To Register...]

DVBViewer 7.0.0

Change Log DVBViewer Pro 7.0.0
Overview
Please note: DVBViewer Pro 7.x contains major changes. If DVBViewer is associated with a DVBViewer Media Server (full or basic version), it should be updated to version 3.x, because there may be compatibility issues with older Media Server 2.x versions. “Associated” means in this context, that Options → DVBViewer Media Server → Enable support for the DVBViewer Media Server is switched on and the Media Server in question is selected on this page.


DVBViewer_setup.exe.zip

[Only registered and activated users can see links. Click Here To Register...]

Quote:

---

Originally Posted by bonou2 [Only registered and activated users can see links. Click Here To Register...]

DVBViewer 7.0.0

DVBViewer_setup.exe.zip

[Only registered and activated users can see links. Click Here To Register...]

---

Multumim.

Un TransEdit 4.2.3/4.2.4 este disponibil ?
Big Thank You.

Trans Edit 4.2.4.1 [Only registered and activated users can see links. Click Here To Register...]

Ms.
Sarbatori fericite @all

Se poate un reupload te rog frumos? Multumesc mult, anticipat!

@[Only registered and activated users can see links. Click Here To Register...]

Ai o singura postare plus insistenta pe PM. Licenta DVBViewer s-a ieftin acum la 20E. Cu mai ieftin de atât nici nu ieși din casă seara la o bere cu prietenii

Licenta la DVBViewer a fost intotdeauna 20 de euro, nu inteleg despre ce ieftinire vorbesti, eu vreau doar Transedit pentru verificari de bitrate, scanare NIT pe digital si asa mai departe.

Nu folosesc DVBViewer ca sa ma uit la TV - am Vodafone, abonamentul cu toate canalele, am decodorul Vodafone TV si un CI+ pentru televizor, deci zgarcit nu sunt.

Daca era vorba sa ma uit la TV plateam cei 20 de euro, dar pentru verificare de bitrate si sa ma uit pe ce pozitie in LCN sunt unele canale regionale, nu mersi.

Ah, si daca tu iesi cu tovarasii si dai pe consumatia ta 20 de euro adica 100 lei, inseamna ca bei de stingi...



Am Transedit 4.2.1.1 luat din alta sursa. Am vazut ca Transedit 4.3 aduce urmatoarele schimbari, curioase pentru mine:

• Added: Scanner Options: “Scan NIT, BAT and VCT for logical channel numbers” checkbox. It lets the scanner read the broadcasted NIT (Network Information Table) in case of DVB-T/C, BAT (Bouquet Association Table) in case of DVB-S or the VCT (Virtual Channel Table) in case of ATSC. The scanner displays logical channel numbers in an additional column of the Scanner Window after the scan is done.For ATSC they appear as major and minor number separated by a dot.The new columnenables to sort scan results by number. If the broadcaster does not provide logical channel numbers, the LCN field remains empty. The numbers are also written to exported INI channel lists as “LCN=x” entries. Please note that additionally reading the NIT and/ or BAT may let the scan take considerably longer (due to NIT/BAT cycle times that are mostly longer than PAT, PMT and SDT cycle times). The logical channel numbers cannot be imported inthe current DVBViewer version since it cannot handle them and ignores them in INI channel lists.
• Added: Scanner Options: Network/Bouquet ID input line, allowing to specify a Network ID (if logical channel numbers are contained in the NIT) or Bouquet ID (if logical channel numbers are contained in the BAT), that lets the TransEdit scanner only use logical channel numbers from tables with a matching ID. The default ID 0 lets the scanner prompt for selection, if more than one kind of numbering is available (see below).
• Added: Scanner Window: “Channel Numbering Selection” dialog. It can be opened by selecting the corresponding context menu item (or by pressing Ctrl + L) after a scan has found logical channel numbers. If more than one kind of numbering is available and no Network/Bouquet ID is set up on Settings → Scanner, the dialog opens automatically after a scan, prompting to select one of the numberings. For each the dialog displays the ID and the network/bouquet name. Ticking the “Remember LCN ID” checkbox before clicking OK lets TransEdit copy the selected ID to Settings → Scanner and save it, so that the “Channel Numbering Selection” dialog does not appear automatically after a scan anymore. However, it can still be opened manually, in order to view the available IDs and names, or to try an alternative numbering."
  

De asta l-am vrut mai exact...... dar ma rog. Postare insistenta insemna sa te spammez cu mesaje. Ti-am scris un singur mesaj si atat. Cu politeturile de rigoare.

Nu ai de ce sa fii supărat; la al doilea post deja critici un user vechi. De fapt primul tău post ar fi trebuit să fie un salut către membrii forumului.

Am cerut un simplu reupload si incep sa mi se faca reprosuri nefondate, cum ca o iesire cu tovarasii nu se poate realiza fara minim 20 de euro. Putea sa spuna in privat : "nu" si gata, fara atata tevatura.

In plus repet, insistenta in PM inseamna spam, ceea ce eu nu am facut, am dat un simplu mesaj daca se poate un simplu reupload, am fost cat se poate de politicos.

Peste o lună chiar te rog sa fii politicos.

DVBViewer Pro 7.1.2.1 setup

DVBViewer_setup.exe (9.3 MB)

[Only registered and activated users can see links. Click Here To Register...]

Change Log DVBViewer Pro 7.2.3.0

Added: Key Tool: Possibility to create an encrypted license data backup file containing the key file content, DVBViewer password and add-on passwords. Please note that the Key Tool stores already installed license data as backup, not possibly differing data entered or edited in the Key Tool user interface. So it is necessary to install licenses before creating the backup. The Backup should be saved on an external medium like a USB drive, where it survives a PC crash, so that you don’t have to purchase the license(s) again in this case!

Loading a license data backup with the key tool requires first entering the user name (the mail address used for ordering DVBViewer) with which the backup was created. After loading the file the Key Tool immediately re-installs the back-upped data without requiring further action.

Change/Fix: Key Tool: Several fixes and adjustments in the Key Tool user interface, among them:

For writing license data to your hard drive the Key Tool user interface now uses the term “Install”, not “Save” anymore, in order to avoid confusion with “Save License Backup”.

For letting the browser show the add-on “Order” pages the Key Tool now uses HTTPS URLS, not out-dated HTTP URLs anymore.

Deleting installed key files did not work correctly under certain circumstances.

Removed: OSD: All games and the Alarm Timer page, assuming that nobody uses/needs it anymore. The pages can be reactivated with a tweak. Please post in the forum if there is any need for it.

Fix: OSD Mini EPG: When using the Mini EPG for browsing through channels (requiring Options -> TV/Radio -> Browse in Mini EPG to be switched on), previously displayed EPG data was not replaced by "No EPG data available", if no EPG data for the next channel and given time was available (since 7.2.2, see here). Furthermore the bar in the Mini EPG showing the already elapsed time of the currently running program did not vanish when switching to the EPG of future or past programs with OSD Right/Left and did not show the elapsed time correctly after returning to the EPG of the currently running program (since 7.2.2, see here).

Change: OSD Mini EPG: The time for which the EPG shall be displayed is reset to “Now” on each channel change, or to the time of the currently played program in case of timeshifted playback. Previously the last set time was kept (see here).

Added: Radio Text:: Detection and display of radio text embedded in AAC frames, as broadcasted by the German ARD via satellite. This applies to playback of live radio and recordings in TS and .AAC format, no matter whether they have been recorded by earlier DVBViewer- and Media Server versions or converted from th broadcasted LOAS/LATM container to ADTS AAC. Please note that the used method (reading the AAC frames in reverse direction) detects almost all radio text, but may overlook parts of it in rare cases.

Fix: TS Stream: General failure with URLs containing no path element, but an at sign (@) or colon in the query part (something like [Only registered and activated users can see links. Click Here To Register...]). They were parsed incorrectly, causing a socket error. Moreover redirections from a persistent “keep-alive” HTTP connection to an HTTPS URL with the same domain were not handled correctly.

Removed: Channel List: Menu item “Sort by Channel Number” in the context menu of channel list representations (introduced in version 7.2.2). It didn’t prove to be useful (see here).

Change: Channel List: After the import of M3U or INI channel lists by using the -l command line parameter (introduced in 7.2.0) DVBViewer saves its channel list automatically if it is configured as client of a Media Server on the same PC, in order to also update the channel list used by the Media Server (see here).

Added: Channel Editor: On M3U (IPTV) channel list import the Channel Editor now adopts channel numbers from tvg-chno tags, if present. Using them for channel selection by number input requires Options → TV/Radio → Use custom channel numbers to be switched on.

Fix: DiSEqC Editor: Display fault in the top area (see here).

Added: Playlist Window: New “Auto-Save when DVBViewer Closes” item in the context menu. If checked this setting lets DVBViewer automatically save the current playlist to the Playlist.m3u file in the configuration folder on closing for restoring it on next start. Previously the playlist could only be saved manually.

Change: Playlist Window: Now the Save/Reload Playlist tool buttons and context menu items are only enabled if the playlist differs from the content of the Playlist.m3u file in the configuration folder. Previously they were always enabled. The numbering of items (if switched on, see context menu) now is one-based. Previously it was zero-based.

Fix: Playlist Window: Drag and drop of media files / folders from the Explorer into the Playlist Window did not work anymore as soon as a playlist item was selected.

Fix: HbbTV: If a HbbTV video was playing, Playback → Playback Off did not finish the OSD HbbTV mode, so that the keyboard did not return to its normal OSD functionality and HbbTV content possibly remained on the screen.

Change/Fix: HbbTV: Several HbbTV-related fixes and enhancements enabling to show (mostly German) HbbTV content and play HbbTV videos/streams that did not work before, for example the ARD and ZDF Replay function (see here), allowing to watch the currently running program from the beginning.

General remark about HbbTV: Due to the generally problematic preprocessing of HbbTV content for presentation in PC browser components, and also because of out-dated third party HbbTV components, the HbbTV add-on for DVBViewer should not be expected to work flawlessly in every respect. It still works passably in German speaking countries (Germany, Austria, Switzerland). However, this can not be guaranteed for the future. In other countries the HbbTV add-on is mostly unusable.

[Only registered and activated users can see links. Click Here To Register...]

DVBViewer Pro v7.3.0.0 (19-05-2024)

[Only registered and activated users can see links. Click Here To Register...]

Salut

Revin si eu dupa un timp , fiindca mi-am cumparat - TBS 6522H - si licenta pentru DVBViewer
Va rog frumos ce add-on sa folosesc si un - How To - daca se poate la instalarea/folosirea lui pentru a citi un card de la portocala de pe DM 920
Nu am mai folosit soft dedicate receptiei tv cam de cativa ani si numai stiu ce si cum se instaleaza/foloseste add-on-urile pentru ce am scris mai sus

Multumesc anticipat de ajutor/idei

@[Only registered and activated users can see links. Click Here To Register...]

Daca te referi la ce plugin ai nevoie pentru sharing-ul unui card pe dvb viewer, acesta ar fi Hadu, dar nu sunt sigur daca cardul orange permite sharing-ul total chiar si in mod intern. Eu am folosit Hadu cu un card Focus, HD+ sau Freesat fara probleme, cu setarile ca la orice linie de cccam. Doar pui fisierele hadu.dll si hadu.cfg in folderul plugin din dvb viever. Evident ca inante iti configurezi fisierul hadu.cfg cu datele tale si adaugi in oscam-ul de pe dm920 un user cu datele dorite pentru linia cccam