AZbox firmware V.1...(Daily FW),

v. 0.9.4923
11.06.2010

• added new movie subtitle menu option
• fixed seek in wma
• fixed detection of avi duration time
• corrected sub file format

Code:

---

[Only registered and activated users can see links. Click Here To Register...]

---

la mine lipseste optiunea de cautare a canalelor, oricum, nu vad la ce ar folosi la un receiver !

nu stiu cauza, dar a aparut !

[Only registered and activated users can see links. Click Here To Register...]

fixed the antenna settings when using diseqc 1.2 | fixed the teletext synchronization (rec) | fixed the reservation process

Baietii de la @Telasat au modificat ultimu patch 4931.


This image is a modifictaion of original 0.9.4931 and it is, in a first place, for dummies.
The idea is that dummy, which is usng AZBox for a first time, can get basics for normal use of it,
without any knowledge of linux/stb.

Installing this FW you are getting:
- new skin, which is, by my opinion, more elegant from the original one;
- ch list for the most watched satellites for usals DiseqC motor
- plugins: liveonsat, livefeeds, tevee4yu, WeatherForecast, SudoQ, tuxchess_0.2, colorbars, PassReset
- CAMs and camreader: Mbox, MGCamd, MultiCAS, CheopsCAS and NewCS (CardReader)
by default Mbox and Newcs are active, cofigured to work together,
which means that the only thing that you should do is to put your original card in the slot and the image will appear
You can choose CAMs by pushing '****|' button
You can get ECM info if you push '****' button
- font 'telesat_Uni4AZ.ttf' - subtitles have better visibility (space is ok)
- Network is set on automatic assigning of network parameters - DHCP
After your first restart, on VFD you will get IP address, which is assigned to AZBox
- Network services activated: SSH, Telnet, FTP
- SAMBA activated and set right
- Settings for downloading plugins and CAMs - reset

After you install FW and your first restart, you'll get setup menu.
Choose 'TV channel', then 'Tuner A.DVB-S' and 'Antenna Setup', go down to 'Positioner Setup - USALS', press OK and enter your USALS parameters.
After you go out from the menu, remove your USB stick, reboot your AZBox pressing POWER button down for 5 seconds.
Your AZBox is now ready to be used.

Gratitude goes out to the AZBox4YU team:
Chemstar - for the preinstalled plugins
iPod - for the idea
Roger Rabbit - moral support
Mickey - testing
Thief - proof-reading
telesat - the one responsible for the existance of this FW

ATTENTION :
IF update with new FW is succesful - you will get SETUP menu, in other case - pls renew update !

[Only registered and activated users can see links. Click Here To Register...]

fixed udp stream feature | improved recording process | improved multimedia playback | fixed hang when playing mkv with dts tracks

[Only registered and activated users can see links. Click Here To Register...]

2010.07.30 azbox-0.9.5006

updated youtube | updated sat network infos

[Only registered and activated users can see links. Click Here To Register...]

ma poate ajuta cineva ,cum se face nagra 3 pe azbox

@adespei , citeşte [Only registered and activated users can see links. Click Here To Register...]





.

0.9.5020
-epg improvements
-some other minor adjustments
[Only registered and activated users can see links. Click Here To Register...]

Azbox 0.9.5209 patch 28.12.2010
Changelog:

*youtube fix

DOWNLOAD:

[Only registered and activated users can see links. Click Here To Register...]

2011.02.20 azbox-0.9.5300-patch.bin 50.2 MB 990ef1b724d194a564c932be0a0922cd fix youtube thumbnails | some minor changes

[Only registered and activated users can see links. Click Here To Register...]

Azbox HD firmware( Méditel version)
version :: 1.0.19
date:: 20/02/2011
changelog:
-azmail(functie disponibila cu butonul EMAIL din telecomanda)
-pop3checker


Download:
[Only registered and activated users can see links. Click Here To Register...]

FTP:
user :: root
pass :: meditel
pin for settings :: 0000

intre timp au mai modificat cate ceva:
prima avand 50.1 MB

2011.02.21 | azbox-0.9.5300-patch.bin | 46.51 MB | fix youtube thumbnails | some minor changes | 0.9.5300: removed unused files

butoanele RC [www] si [email] nefunctionale cel putin pe prima versiune cea de 50MB, insa merg pe Méditel !

un lucru bun: OSCAM da roade si lucreaza si la recording/play HD.
(la mine era imposibil de redat continutul inregistrat cu versiuni pana la svn 47xx dvbapi)
poate vor rezolva si problema: "viteza transfer".

intre cele 2 versiuni OpenSAT si cea pentru Méditel, cea din urma pare a fi si cea mai buna.
-rapida in meniu
-rapida in zapping
-inregistrare
-mediaplayer
-un skin dragut
fw vad ca este Ready2Go pentru acest DTH, autoconectare la NETBOX-ul Méditel(autentificare retea, bouquet TV preinstalat)
-functia de autoupdate si bachup.
DISK2/etc/Meditel/fwchecker:

Code:

---

#!/bin/sh
###########################################################################
# MEDITEL PUSH Firmware System
#    Author: leandro
###########################################################################

BASEURL=http://meditel.azupd.com
WORKDIR=/Download

LAST_REV=$( wget -O- ${BASEURL}/update_lists.txt | head -n 1 )
VERSION=$( echo ${LAST_REV} | cut -d' ' -f 1 | cut -d. -f 3 )
LOCAL_VERSION=$( cut -d' ' -f 1 /MMP/version.txt | cut -d. -f 3 )

#echo "[i] Checking if a new version is AVAILABLE..."
if [ ${VERSION} -gt ${LOCAL_VERSION} ]; then
    echo "[i] A new version is available, start upgrading system..."
    rm -rf ${WORKDIR}/*
    rm -rf /tmp/WriteDir

    wget -O ${WORKDIR}/patch.cramfs ${BASEURL}/patch.cramfs
    if [ $? != 0 ]; then
        echo "[!] Download failed..."
        exit
    fi

    touch /tmp/.need_recovery
    cp -af /usr/local /tmp/
    cp -af /DISK1/system_tools/rcPatch /tmp/
    /sbin/reboot

    echo "[i] DONE!"
fi

---

la instalare fw se administreaza datele wifi/pop3checker/timedat/bouquet TV( # Meditel Checker at BOOT - v.3.0 # 2010.08.20 )
/DISK2/etc/service.d/S10Meditel:

Code:

---

#!/bin/sh
####################################################
# Meditel Checker at BOOT - v.3.0    # 2010.08.20 #
####################################################

echo -n "==> Checking if the 'pop3.xml' file exists "
if [ -f /DISK2/etc/pop3.xml ]; then
    echo "OK"
else
cat > /DISK2/etc/pop3.xml << EOF
<?xml version="1.0" encoding="ISO-8859-1"?>
<!-- POP3 Checker Configuration -->
<alert>
    <username>Tapez ici votre adresse mail</username>
    <password>Tapez ici votre mot de passe</password>
    <popserver>Tapez ici l'adresse de votre serveur mail</popserver>
    <checktime>5</checktime><!-- time defined in minutes -->
    <autostart>no</autostart>
</alert>
EOF
    echo "... Restored ..."
fi

#
##
#

echo -n "==> Checking if the 'ra0.script' file exists "
if [ -f /DISK2/ra0.script ]; then
    echo "OK"
else
cat > /DISK2/ra0.script << EOF
#!/bin/sh
#WEP/OPEN
#WIRELESS_SSID=MEDITELBOX
#WIRELESS_KEY=MeditelBox
iwpriv ra0 set NetworkType=Infra
iwpriv ra0 set AuthMode=OPEN
iwpriv ra0 set EncrypType=WEP
iwpriv ra0 set DefaultKeyID=1
iwpriv ra0 set Key1=MeditelBox
iwpriv ra0 set SSID=MEDITELBOX
EOF
    echo "... Restored ..."
fi

#
##
#

echo -n "==> Checking if the 'interfaces' file exists "
if [ -f /DISK2/interfaces ]; then
    echo "OK"
else
cat > /DISK2/interfaces << EOF
auto lo
iface lo inet loopback
auto ra0
iface ra0 inet static
address 192.168.1.100
netmask 255.255.255.0
gateway 192.168.1.1
pre-up /DISK2/pre-up.ra0
post-down /DISK2/post-down.ra0
EOF
cat > /DISK2/resolv.conf << EOF
search local
nameserver 192.168.1.1
nameserver 0.0.0.0
EOF
    echo "... Restored ..."
fi

# Check some files, exit if they already exists
#test -f /DISK2/DVBS.dat        || exit 0
#test -f /DISK2/antenna_list.dat || exit 0
# At this point we need to restore the package

echo -n "==> Checking if the 'Meditel' bouquet exists "
if [ -f /DISK2/all_channel.dat ]; then
    echo "OK"
else
    tar xzvf /DISK2/etc/Meditel/bouquet.tgz -C /
    echo "... Restored ..."
fi

#
##
#

echo -n "==> Checking if the 'timer.dat' exists "
if [ -f /DISK2/timer.dat ]; then
    echo "OK"
else
    cp -f /DISK2/etc/Meditel/timer.dat /DISK2/
    echo "... Restored ..."
fi

exit 0

---

pentru o instalare cat mai curata:
0.revenire la setari de fabrica pe fw curent, introduceti Flash USB cu noul fw(vezi pct.9.1 )
1.se instaleaza noul fw.
2.revenire la setari de fabrica(se va restarta)
3.se seteaza parametrii internet si servicii internet(Telnet server = Enabled)
4.se lasa in meniu [Settings]
5.in telnet dam comenzile de clean DOM(MMP,Plugins,DISK2):

Code:

---


mount -o remount,rw -t ext3 /dev/hda1 /MMP
rm -rf /PLUGINS
rm -rf /DISK2
rm -rf /MMP
sync

---

vor aparea cateva erori normale "busy" acestea fiind montate si in lucru!
6.Power OFF de la butonul din spate
7.Introduceti USB Flashul cu patch.bin pregatit
8.Power ON
9.Reinstalam din nou noua versiune fw.

Code:

---

Format application Area
upgrade USB

---

9.1.Nu scoateti Flashul USB, ca metoda de siguranta il lasati pana face reboot si dam:

Code:

---

Reboot without upgrade

---

10. Incarcam setarile bachup( in caz ca s-au facut):
DISK2:

Code:

---

all.channel.DAT
antenna_list.DAT
DVBS.DAT
genre.DAT
country.DAT
pentru terestru:
DVBT.DAT
DVBTa.DAT
pentru cablu:
DVBCa.DAT
DVBC_ger_a.DAT
DVBC_ger.DAT
DVBC_bra.DAT
hostaname(daca a-ti personalizat)
inadyn(daca se lucreaza cu el)

2.PLUGINS
3.etc...

---

:arrow1:Am instalat si eu imaginea de la Meditel si la prima vedere functionaza MULT mai bine decat orice firmware original . Si pluginurile se misca mai bine ( Multicas, Mgcamd, Newcs ) ca sa nu vorbim de cartela TVR care se initializeaza din prima. Multumesc Qwess :clap: o sa revin dupa ce mai testez , poate o sa instalez si OSCAM-ul dar nu l-am studiat destul si din aceasta cauza nu m-am prins cam la ce ajuta .

---------- Post added at 21:59 ---------- Previous post was at 21:26 ----------



Si iata un nou firmware de la OPENSAT azbox-0.9.5301-patch.bin !!! Se pare ca s-au apucat de treaba si are doar 45.88 MB ! cu urmatoarele specificatii :

-improved the multimedia libraries | fixed ghost char | added support for the www and email rcu buttons (needs azmail) | updated the dutch translation
:cool2:

[Only registered and activated users can see links. Click Here To Register...]

Salutari !

Opensat continua sa ne uimeasca cu un nou firmware :
-azbox-0.9.5302-patch.bin 45.94 MB added the finnish and swedish translations | improved the language selection system | improved avi/xvid support
:clap: Si eu care credeam ca s-au lasat pagubasi :)

Link: [Only registered and activated users can see links. Click Here To Register...]

Un nou firmware aparut pe 11.03.2011 cu urmatoarele completari:

- added finland and denmark cable freq | fixed streaming

link: [Only registered and activated users can see links. Click Here To Register...]

Numai bine ! :cool2:

azbox-0.9.5304-patch.bin
date:20110325
md5: e10682fce3f603dc7a593e926b5cccb2
changelog:

• updated the french translation
• fixed browser and rss issues (missing files)
• improved the recordings playback
• improved the online system upgrade

[Only registered and activated users can see links. Click Here To Register...] (45.34 MB)

New firmware 0.9.5305, fix youtube :!:


link:

[Only registered and activated users can see links. Click Here To Register...]