maybe you should contact your dealer :(
Printable View
maybe you should contact your dealer :(
Thank you, my brother to help meQuote:
Originally Posted by snow [Only registered and activated users can see links. Click Here To Register...]
vad ca te pricepi la receptoarele aste zi si mie ce sai fac imi da er 10 si nu se conecteaza nici cu o imagine .Poate nu am inteles eu cablu tre sa fie nul modem 2.3-3.2-5.5 sau altfel de cablu. mersi mult
pui imaginea pe un stick si o redenumesti in usb_update sau usb_update.img*
la unele merge intr-un fel, la altele in celalalt
opresti receptorul de la butonul din spate, bagi stickul in aparat, tii apasat botonul de power de pe receiver - cel din fata - si dai drumul din spate. cand apare boot apesi sageata in sus, va aparea usb update. il lasi sa-si faca treaba. dupa ce-ti apare usb update, nu mai este nevoie sa tii butoanele apasate.
stickul trebuie formatat in fat32 si sa-i dai safely remove inainte de-al scoate din pc
asta e valabil numai pentru imaginile "standard", pentru enigma vezi how to-ul lui zildan
ps: s-au mai scris lucrurile astea pe aici
aveti idee, se mai ocupa cineva de Enigma2 pentru ipbox? fata de kathrein vad ca e in urma rau de tot. :(
Am aflat ca se ocupa sifteam....si o sa vine si inca o versiuna in perioada asta.si se ocupa inca cineva care nu am voie sa spun mai multe.....
parca spunea zildan ca are un ipbox 910 si-l studiaza.poate se apleaca si asupra acestei probleme si ii ajuta pe posesorii acestui receptor.zildan,sint ceva sanse de imbunatatire pt. e2 la ipbox ?e departe momentul acela?
nu deranjeji pe zildan......studieze!!!!
:comp:
@Tideglo a raspuns asta:
"I'm working on Enigma2, the project will continue... as i said many times, you have to wait if you want to see some improvements.
Regards."
Asteptam cu nerabdare. :D
Enigma 2 in usb step by step guide
TOOLS:
1) 1 usb stick
2) 1 null modem Rs 232 cable
SOFTWARE:
1) Putty telnet program here:
[Only registered and activated users can see links. Click Here To Register...]
2) KCC ( Kathrein Control Center ) here:
[Only registered and activated users can see links. Click Here To Register...] (you need register first)
3) Any FTP client
4) Enigma2 SifTeam 0.2.0 mod PKT beta 3.0b image from the download section
STEP 1
We need to change our U-boot loader (1.3.1 or higher) to a multiboot loader. To do that,
your receiver must be flashed with a Sifteam, PKT or ipbox standard image (not Enigma2 image)
a) Connect the rs232able from your receiver to your PC your receiver must be off from the main power switch.
b) Run puTTy and chose serial. Type at serial line the correct COM port (the com port that your RS232 is connected)
and type at speed 115200 then click at open button.
c) Switch on your receiver and hit Ctrl and Z together until you see at the putty screen Cuberevo>
If you fail switch off the receiver and retry. Type or copy paste the above
setenv menu_1 'setenv ipaddr 192.168.5.107;setenv serverip 192.168.5.105;setenv gateway 192.168.5.254;setenv netmask 255.255.255.0;setenv bootusb "run bootargsusb;usb reset;ext2load usb 0:1 a5ff0000 boot/uImage;bootm a5ff0000";setenv bootargsusb "setenv bootargs console=ttyAS1,115200 panic=3 root=/dev/sdb1 rw rootdelay=10 init=/bin/devinit ip=$ipaddr:$serverip:$gateway:$netmask mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000";setenv bootcmd "run bootusb";saveenv;boot'
and press enter then type or copy paste:
setenv menu_2 'setenv ipaddr 192.168.5.107;setenv serverip 192.168.5.105;setenv gateway 192.168.5.254;setenv netmask 255.255.255.0;setenv bootargs "console=ttyAS1,115200 panic=3 root=/dev/mtdblock3 bigphysarea=1500 ip=$ipaddr:$serverip:$gateway:$netmask quiet";setenv bootcmd "bootm a0060000";saveenv;boot'
and press enter. Now type:
saveenv
and press enter to save your configuration.
Be sure that you change the ipaddr, servrip, gateway and netmask with your LAN settings
ipaddr= the ip address of your receiver
serverip = the ip address of your pc
gateway = the ip address of your router
netmask = netmask!!
To find out your pc ipaddress the gateway and the netmask: double click at your local area connection at your pc then click support.
d) Now switch off your receiver ( allways from the main power switch!! ) press at remote control 2 and switch on your receiver keep pressing 2 for about 5 to 10 sec.
Ok now your receiver booting from the standard image. (if you switch off and switch on again your receiver will be booting from the standard image dosent need to press again 2.)
Step 2
a) As your receiver is turned on and working with a standard image, plug in the usb stick.
b) Run KCC type the ipaddress, the username and the password on Telnet and FTP fields.
c) Click on test to be sure that everything is ok.
d) Now click at the experts button. If you can see the SDB icon you are in the right way if not switch off your receiver and make the step 2 from the begining.
e) Right click to the sdb and make a new partition with ext2 or ext3 (doesn't matter) file system. you can make more than one partitions.
f) As you finish with the partition switch off the receiver plugout the usbstick then switch on the receiver wait until the standard image load and then plug inthe usb stick again.
g) Download and unzip the Enigma2 SifTeam 0.2.0 mod PKT beta 3.0b image on your desktop. Its better to this point to rename the Enigma2 SifTeam 0.2.0 mod PKT beta 3.0b
to enigma2, now at your desktop you must have a file enigma2.tar.gz. (approx 60Mb) Also its better to unzip the enigma2.tar.gz file to enigma2.tar with the 7zip program.
h) Run the FTP client and put the enigma2.tar (or enigma2.tar.gz) from your desktop to your receiver at mnt/usb/usb0 path.
Step 3
a) Run putty at telnet mode type the ipaddress of the receiver then click at open button.
b) Logging in telnet mode and type this command:
cd /mnt/usb/usb0
and press enter then type the command:
tar xvf enigma2.tar
and press enter. If you have the enigma2.tar.gz type the command
tar xvfz enigma2.tar.gz
Wait until finish (takes about 30-45 minutes)
c) switch off your receiver.
Step 4
a) Press at your remoote control 1 and then turn on your receiver.
b) Wait about 10 minutes for the first boot
c) Check at the receiver lcd panell to chose the output (Scart RSA HDMI etc)
Step 5 (Final step)
If everything works fine go with your ftp at etc/resolve.conf edit and change the 192.168.1.1 to your router ipaddress. This is important to have your receiver internet access.
ATTENTION: If you want to boot from flash the standard image, before you do it remove the usb stick from your receiver.
A VERY BIG THANKS TO EVERYBODY MADE THE ENIGMA2 TRUE FOR CUBEREVO!!
am citeva nelamuriri ,poate ma ajutati:
-fisierul welcome inlocuie secventa scrisa su telnet sau hyper..(setenv menu1...setenv menu4) ?
-uboot1.3.3 se pune o sing data sau de cite ori se scrie e2 in usb flash cu o imag dgs,nlb pusa deja in flash ?
-cu toate ca am pus ip-ul dorit de mine in telnet dupa explicatiile de pe forum ex:192.168.1.59,dupa ce am pus ultima e2 ,mi-a aparut tot 192.168.1.8 pe care nu-l pot schimba.unde poate fi greseala ?
-etc/resolve.conf - se schimba ip router ??
Am incercat eu sa schimb IP si DNS dupa instalarea E2 pe stick, dar nu functioneaza. M-am uitat in dmesg la imaginea sifteam 8873 si se pare ca si pe ea se raporteaza IPul 192.168.1.8, dar probabil se face ceva in plus prin scripturile de la boot ca sa iti ia IPul si DNS serverul din /etc/, ceea ce trebuie implementat si la E2. Cand prind putin timp o sa fac o comparatie intre imaginile instalate sifteam-8873 si E2, poate vad ce ar trebui adaugat.
azi mi-am bagat hard disk sata de 250 GB in STB, nimic mai bine, nu am stiut ce pierd pana acum, vreau sa zic ca daca E2 in flash boot-eaza in 3 minute si, de pe usb flash boot-eaza in 1 minut si 30 secunde, de pe disk pleaca mai repede decat AB Com din flash ~40 secunde:))
comenzile de setenv sunt:
setenv menu_1 'setenv ipaddr 192.168.11.4;setenv gateway 192.168.11.1;setenv netmask 255.255.255.0;setenv bootargs "console=ttyAS1,115200 panic=3 root=/dev/mtdblock3 bigphysarea=1500 ip=$ipaddr::$gateway:$netmask quiet";setenv bootcmd "bootm a0060000";saveenv;boot'
setenv menu_2 'setenv ipaddr 192.168.11.4;setenv gateway 192.168.11.1;setenv netmask 255.255.255.0;setenv bootide "run bootargside;ide reset;ext2load ide 0:3 a5ff0000 boot/uImage;bootm a5ff0000";setenv bootargside "setenv bootargs console=ttyAS1,115200 panic=3 root=/dev/sda3 rw rootfstype=ext3 init=/bin/devinit ip=$ipaddr::$gateway:$netmask mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000";setenv bootcmd "run bootide";saveenv;boot'
btw, cine zice ca nu merge decat sata1 vorbeste prostii eu am pus:
Reset IDE: Bus 0: OK
Device 0: Model: ST9250827AS Firm: 3.AAA Ser#: R57G40E1
Type: Hard Disk
Supports 48-bit addressing
Capacity: 238475.1 MB = 232.8 GB (488397168 x 512)
Singura problema e sa fac ca imaginea din flash sa nu imi mai faca ea la boot 2 partitii cum vrea ea si sa le reformateze. :comp:
cu KCC nu poti sa il fixezi asta dupa?Am impresia ca se poate.
[Only registered and activated users can see links. Click Here To Register...]