Hadu - CCCam

Merge fără probleme.
Probabil ai suprascris fişierul Hadu.ini şi ai pierdut vechile setări.



.

Deci sa scriu cum se manifest ala mine..am incercat de la versiuni mai vechi pan ala 0.1.2.6 tot asa fgec..bag linie valida in ini (car functioneaza pe dreambox) dar acolo cand dau la monitor tot acelasi lucru imi apare indiferent ce linie bag un ip si portu 12001 (xxx.xxx.xxx.xxx:12001 ) apare conecting apoi stopped si tot asa.. are cineva idee ce e cu ipu ala? si inca chestie :chiar adac sterg hadu din plugins el tiot imi apare acolo in viewer la sectiunea plugins .. nust ce draq are numa la mine


.

Cred ca folosesti vista sau w7-daca e asa foloseste editor notepad si nu wordpad sau notepad ca altfel nu se aplica modificarea.
Lasi in config doar linia ta nu si alte prostii.

cu otepad am editat... hai ca las numa linia in ini sa vad ce se intampla si am win xp .. mai demult mio mers fara probl... mi aa cioda ca face skemele astea

Poate gresesti ceva cand scri linia in el de aceea e bine sa folosesti :


Hadu Server Editor
[Only registered and activated users can see links. Click Here To Register...]

msi mult melting ,asta era greseala..eu editam dupa formula veche Server=CCCam:MyServer.com:12000:0:MyUsername:MyPassword dar vadk editoru face alcumva comanda pt server.. anume [Serv_1] sau [Serv_Myserver1] in loc de [Serv_Dreambox] asa cum era mai demult si eu nu schimbasem ..si mergea asa.. in fine asa e daca nu esti in ton cu schimbarile..

Pune asta in care modifici linia ta

Quote:

---

[General]
PluginActive=1
KeyPath2=

[Options]
UsePSITables=1
SurveyPMT=1
UsePATforPMT=0
DontUpdViewer=0
UseDVBTime=1
MaxECMPIDs=4
MaxConnections=4
DisplayIPorURL=1
ECMTimeOut=3
LogMessages=0
LogMessLevel=1

[Specific]
DVBViewerAPI=0
DVBViewerAllAudio=1
DVBViewerCSAStat=0

[Device]
MDRoot=0
DescrCommand=
XorEven=
XorOdd=
UseTT=0

[Serv_ubuntu]
Server=CCCam:att.dns.net:12000:0:user:passw
;
; Sample for a CCCam server
; -------------------------
;
; Server declaration (mandatory) :
; [Serv_whateveryouwishforyourservername]
; Mandatory parameter :
; Server=Protocol:Server:Port:(unused):Username:Password
; Sample: Server=CCCam:MyServer.com:12000:0:MyUsername:MyPassword
; Optional parameters :
; Active= ; ([1] or 0)
; TimeOut= ; (0=None, or 3-7 seconds. Default is [5] seconds)
; PadTime= ; ([0=None], or (TimeOut+2)-N seconds)
; WantEmus= ; (0=No or [1=Yes])
; MaxHop= ; ([0=None], or 1-N)
; CAIDProv= ; [None] or 32 max entries of CAID/Providers
; NoCAIDProv= ; [None] or 32 max entries of CAID/Providers
; NoNodeProv= ; [None] or 32 max entries of Node/Providers
; CAIDTunnel= ; [None] or 32 max entries of CAID/CAID/Provider/SIDs

---

poate sunt io mai incet la minte dar nu reusesc nici cum cu hadu, daca poate pune cineva un print screen cum ar trebui sa arate hadu.ini dupa modificare i-as fi tare recunoscator.
Am incercat si cu vplug de vreo saptamana dar am inceput sa imi pierd rabdarea, am luat 100 de softcam.key si pluginuri si nu reusesc sa il fac sa mearga.
Nu am mai folosit placa de vreun an de zile si se pare ca am ramas in urma cu noutatile.
Multumesc si astept suport.

[General]
PluginActive=1
KeyPath2=

[Options]
UsePSITables=1
SurveyPMT=1
UsePATforPMT=0
DontUpdViewer=0
UseDVBTime=1
MaxECMPIDs=4
MaxConnections=4
DisplayIPorURL=1
ECMTimeout=3
MaxCAIDLoops=4
LogMessages=0
LogMessLevel=1
Systray=1

[Specific]
DVBViewerAPI=0
DVBViewerAllAudio=1
DVBViewerCSAStat=0
DVBViewerRecServ=0
DVBViewerIdleServ=0

[Device]
MDRoot=0
DescrCommand=
XorEven=
XorOdd=
UseTT=0

[Serv_dm500]
Server=CCCam:host.no-ip.biz:12000:0:nume:parola

;
; Sample for a CCCam server
; -------------------------
;
; Server declaration (mandatory) :
; [Serv_whateveryouwishforyourservername]
; Mandatory parameter :
; Server=Protocol:Server:Port:(unused):Username:Password
; Sample: Server=CCCam:MyServer.com:12000:0:MyUsername:MyPassword
; Optional parameters :
; Active= ; [1] or 0
; Timeout= ; 0=None, or 3-7 seconds. Default is [5] seconds
; Version= ; [None] or Version:Build
; PadTime= ; [0=None], or (Timeout+2)-N seconds
; TimeRecon= ; [0=Automatic], or 1-32 seconds
; WantEmus= ; 0=No or [1=Yes]
; MaxHop= ; [0=None], or 1-N
; CAIDProv= ; [None] or 32 max entries of CAID/Providers
; NoCAIDProv= ; [None] or 32 max entries of CAID/Providers
; NoNodeCAID= ; [None] or 32 max entries of Node/CAIDs
; CAIDTunnel= ; [None] or 32 max entries of CAID/CAID/Provider/SIDs
; NoSID= ; [None] or 64 max entries of SIDs
; PrioGenRules= ; 1 or several general rules for priority. Default is [HOP]
; PrioCAIDProv= ; [None] or 32 max entries of CAID/Providers for priority
;

la mine asa merge, bineinteles cu hostul, numele si parola corespunzatoare liniei C primita. de asemenea se pot pune mai multe linii dupa acelasi model, din cate am observat maxim 6 linii pot functiona simultan.

Multumesc lui Melting pt sprijinul acordat si pt rabdarea de a raspunde unor intrebari prostesti.
Aveti ceva nelamuri,... cautati-l pana nu is pierde rabdarea :D


:clap::clap::clap::clap::clap:

@alinu...
Nu e vorba de intrebari prostesti ci mai degraba de faptul ca tu nu ai citit cu atentie materialele referitoare la hadu plugin.
Pe viitor pune-ti si tu capul la contribuitie si vei vedea cat de usor este sa configuerezi.
Altfel risti sa te trezesti in ridicol si sa te adaugi si tu celor care le mai ramane de "eliminat gratarul"

Salut am si eu o problema cu Hadu.Am folosit si editorul pentru linie dar nu se conecteaza,apare conecting, dupa aceea stopped.Cum pot verifica daca linia mai este activa.Si inca ceva NewCamd5.25 la ce foloseste, poate fi utlizat pentru o placa SkyStar?Multumesc

Bun ziua tuturor,

O problema am cu acest cam pe progDVB 6x versiunea gratuita nu merge doar pe versiunea pro! poate cineva sa-mi confirme daca intradevar este incompatibila sau doar doar ceva la setarii reprezinta problema?

Multumesc

hadu 0.127

Changelog:
----------
-(partial) support for DreCrypt EMMs,
-EMM PIDs associated to ECM PIDs (based upon the CAID and provider criteria) are now all displayed into the concerned column ("Monitor" window),
-an option has been added to display all the other EMM PIDs (i.e. EMM PIDS not associated to ECM PIDs; see "DispAllEMMs" option);
-"EMMCAID" option has been extended, in order to include an optional EMM PID (see "EMMCAID" option),
-bug fix for the non correct display of indexed nodes (when the list of the nodes is sorted by user),
-Hadu is considered back as a 2.1.4 version client by default. You can of course still modify the client version sent to the server (see "Version" option),
-minor modification into the possible levels of informations to log (see "LogMessLevel" option),
-display of the "Server Infos" window has been optimized (it's now a bit more reactive, while using less CPU resources),
-an option has been added when Hadu is used within the DVBViewer recording session. It's now possible to start the connection with the server(s) only if the channel is encrypted (see "DVBViewerEncrServ" option),
-support for the new CCCam commands introduced in CCCam version 2.2.0 or above (i.e. commands 0F for the node data, and commands 0C, 0D for the new CCCam "checks"). An option has been added to authorize or not the Node SID assignment/rejection feature present in commands 0F (see "UseNodeSID" option). The Node SID assignment/rejection feature will be activated by the server, only if Hadu is also declared as a CCCam client version 2.2.0 or above (see "Version" option). But, as there is a bug concerning the new CCCam "checks", declaring Hadu as CCCam client version 2.2.0 may conduct to an improper channel decoding (see the new workaround menu "Switch DCW Last Byte"),
-support for the OSCAM Partner handle, and its Node SID assignment/rejection feature (the Extended ECM Mode is also checked but currently not used). Several options have been added to authorize them or not (see "OSCAMPartner", "OSCAMExt" and "OSCAMSID" options). Furthermore, when activated these features are displayed at the bottom of the "Server Infos" window, as for the build of the OSCAM server,
-2 new features have been added: a list of ECM PIDs used (i.e. ECM PIDs cache; see "Hadu-Cache.txt" file), and a list of manual ECM PIDs (see "Hadu-Manual.txt" file). These features may be activated/deactivated directly from the main menu of Hadu (see "Cache" sub-menu, and "CacheUse", "CacheUpdate", "ManualUse" options),
-an new column (title "Opt") has been added in the list of the nodes into the "Server Infos" window (to display eventual additional infos concerning the nodes),
-all the log files (i.e. 'Hadu-Mes.log', 'Hadu-EMM.log', 'Hadu-PIDxxxx.log' and 'Hadu-Dump.txt') are now always put in the same directory as the plugin itself (no more in path indicated by "Keypath2", if this option is used). "Keypath2" is reserved for files possibly shared within several occurs of Hadu (like the files for the ECM PIDs used and the manual ECM PIDs),
-support for Nagra Tiger EMMs,
-TID and SID for the current channel are displayed into the "Monitor" window,
-an option has been added when providers/ChIDs used within CCCam messages are rejected by the server (see "DontUseProvFor" option),
-usual minor bug fixes and enhancements


download:
[Only registered and activated users can see links. Click Here To Register...]

Config Hadu.ini V3.0.0 Beta by FTA Boy

1 - This version using the original hadu.ini.
2 - Can set\change hadu setting (more Features will add soon).
3 - User can enter unlimited clines.
4 - Choose server name for every cline.(use server address + a random number)
5 - Can fill all fields automatically (with new fixes).
5 - 1 You can copy and paste cline at host textbox and program will fill other parameters.
5 - 2 Now in this version you can copy cline with C: or with out it.
* it should have a space character between every part. (C: Host Port Username Password) it doesn't important copy no {0:0:3} or don’t… program will detect them automatically.
6 - Program remember Hadu.ini path, use host name, show/editing mode and settings.
7 - Compatible with Hadu 0.127