incubusCamd pe Kathy = Cccam

04/01/2009, V0.55
- fixed some little bugs on DGStations api interface
- added multi descrambling support for DGStations HD original firmwares (PIP, timeshift, recording channels, second tuner support)
- added version sigma to be used with AzBox HD
I've been noticed about many peoples not able to view some channels, don't forget to edit your prio file. Editing that file will give you the ability to chose the right pid wich the cam should be select (if you will not edit it, the cam will use the first pid and then try to use other pids, but this will take much more time to be able to see something).


Cheers ,
Val .


[Only registered and activated users can see links. Click Here To Register...]

In afara de semnatura schimbata (2.11), se pare ca aceasta versiune are o mare intarziere la pornire. Deschide uneori si dupa 2 minute primul canal, dar apoi merge bine.
Se lasa asteptata versiunea multilinie si multiprotocol, acum neputand avea decat o singura linie ccc@m sumultan.

Si daca studiem cu atentie , fisierul incubusCamd.prio e identic cu cel de la ccc@m, in consecinta doar il redenumiti si ar trebui sa mearga.
Ramane sa mai si intelegeti ce e pe acolo.

Merge prio ce cccam si pe versiunea veche de incubus. Doar redenumit si cum ai spus: mai trebuie inteles (nu-i asa greu)
Varianta nou este destul de ok, pe ipbox merge si pip, sau inregistrarea unui program in timp ce te uti pe altul pe acelasi tp. Ar trebui sa mearga si la voi.
Astept confirmarea:drinks:

Deci merge sa inregistrezi un post si sa vezi simultan altul de pe acelasi transponder. Mai schioapata incubus la asta, in sennsul ca postul inregistrat e ok dar la cel vizualizat merge decodarea doar un set de CW apoi treb sa schimbi ca sa deschida.
Pip nu stiu daca se poate.

Hello

I see that in order to get IncubusCamd running one should first put the .tar file in /tmp and then use telnet in order to install.
But I have a SWAP memory installed and also I would like to use the latest version of Incubus (v0.55). How should I do then?

I think maybe I should put "incubusCamd.sh4_e2" in /var/swap/emu
And then the "incubusCamd.conf" and "xx.prio" in /var/swap/keys

What should I do if I want the cam automatically?

Regards
Muftah

Pentru ghinionistii carora nu le porneste Incubuscam-ul pe configuratia data de Zildan Ii roga sa incerce asta.
Cu ea am reusit sa fac si eu lumina.

[Prov:FF00]

card_server_url_0=cccam://<user>:<pass>@<hostname>:<port>

[Servers]

card_server_url_1=cccam://<user>:<pass>@<hostname>:<port>

a reusit sa porneasca cineva incubusCamd_0_75 pe kathrein? ..... ca la mine nu vrea.

Porneste inainte de e2 sau in standby, din key dar nu deschide.
Cred ca ceva nu e legat bine in vers de e2.

Hello,

does anyone get Incubus higher than 0.55 running on the kathi?
I tried 0.70 0.75 and 0.80
nothing will run.

only 0.55 runs and that very bad. have to restart it every few minutes because it freezes.

Perhaps someone can help me to get a newer version running.

Thanks

Regards
Alex

No version after 0.55 will run on kathy. You should try mbox, it's a lot more stable and most important, works on kathy.

Ar putea cineva sa-mi explice daca s-a lovit de urmatoarea problema:

Am instalat incubus 0.55, am pus fisierele de .conf si .prio la locul lor, am adaugat linia de cccam de doua ori, asa cum scrie la tutorial. Insa, emu-ul nu porneste nici mort, se opreste imediat, fara vreun mesaj de eroare sau ceva. Vreo sugestie?

Mai verifica linia din server, vorbeste cu cel care ti-a dat-o.

Quote:

---

Originally Posted by liviurosio [Only registered and activated users can see links. Click Here To Register...]

Ar putea cineva sa-mi explice daca s-a lovit de urmatoarea problema:

Am instalat incubus 0.55, am pus fisierele de .conf si .prio la locul lor, am adaugat linia de cccam de doua ori, asa cum scrie la tutorial. Insa, emu-ul nu porneste nici mort, se opreste imediat, fara vreun mesaj de eroare sau ceva. Vreo sugestie?

---

in conf file pune inainte de linia cu [PROV....] asta:

decoder_type=1

Apoi:

[Prov:FF00]
card_server_url_0=cccam://***********

Apoi:

[Servers]
card_server_url_0=cccam://***********

Da restart la box.

Vezi daca merge.

what's the config for 3 servers CCcam ?

[Prov:FF00]
card_server_url_0=cccam://***********
card_server_url_1=cccam://***********
card_server_url_2=cccam://***********

[Servers]
card_server_url_0=cccam://***********
card_server_url_1=cccam://***********
card_server_url_2=cccam://***********

I tested this, without succes :dance:

Thanks a lot in advance

hello for all
i have kati ufs 910 white 2 enigma image on usb flash barry allen (aaf_sussex_revolutions_ba_image) & (AAFmod_E2-BA_Weihnachtsimage_TDT_rev600.tar.gz) but the incubusCamd not started
on kati or any image how any can help me pleas whatiis a prablem?
tanks

Quote:

---

Originally Posted by dreanew [Only registered and activated users can see links. Click Here To Register...]

what's the config for 3 servers CCcam ?

[Prov:FF00]
card_server_url_0=cccam://***********
card_server_url_1=cccam://***********
card_server_url_2=cccam://***********

[Servers]
card_server_url_0=cccam://***********
card_server_url_1=cccam://***********
card_server_url_2=cccam://***********

I tested this, without succes :dance:

Thanks a lot in advance

---

on 0.55 you can use only one line so the config will be:


[Prov:FF00]
card_server_url_0=cccam://***********




[Servers]
card_server_url_0=cccam://***********


on last 0.80 you can use more line but the config shoul be:

[Prov:FF00]
card_server_url_0=cccam://***********
card_server_url_1=cccam://***********
card_server_url_2=cccam://***********

[Servers]
card_server_url=cccam://***********
card_server_url=cccam://***********
card_server_url=cccam://***********

more ex:
[Prov:000000:CaID:0000]

decoder_type=1
card_server_url_0=cccam://user1:pas1@host1.no-ip.biz:12000 #12000=peer port
card_server_url_1=cccam://user2:pas2@host2.no-ip.org:12000


[Servers]


card_server_url=cccam://user1:pas1@host1.no-ip.biz:12000
card_server_url=cccam://user2:pas2@host2.no-ip.org:12000

Thanks a lot for your reply,
but I did not know use the 0.80 version on the kathrein with enigma² RSP firmware. :dance:

Could You please give a link for download new Incubus 0.80 what works on Kathrein UFS 910 enigma2 ?

[Only registered and activated users can see links. Click Here To Register...]

home/emu/incubus

Quote:

---

Originally Posted by Snow [Only registered and activated users can see links. Click Here To Register...]

[Only registered and activated users can see links. Click Here To Register...]

home/emu/incubus

---

Thank You for fast reply!
Can You please confirm that it works on Kathy UFS 910 e2 (for RSP latest e2 image?) ?
I have just understood that 0.55 is latest working Incubus for Kathy UFS 910 , and the team has finished Kathy support???