-
Oscam-1.00-svn3317
[Only registered and activated users can see links. Click Here To Register...]
Changeset #3304:
Message: cccam: updated reporting cards
Changeset #3305:
Message: added more debug for cw emm in dvbapi
Changeset #3306:
Message: fix missing remote_nodes in struct cc_card
Changeset #3307:
Message: cccam: card exchange exhances, transfering remote node ids
Changeset #3308:
Message: implement a failban functionality new parameter failbantime=0|<minutes> default 0 in [global]. If parameter is 0 or not existant no failban is performed. If parameter has a value an ip address which connect and has no useraccont becomes banned for this time. See debuglog for some output. Blacklist becomes deleted over restart. Tested only with camd35 protocol. Webif implementation of parameter will follow later - set the parameter manually for now.
Changeset #3309:
Message: fix typo
Changeset #3310:
Message: cccam: removed duplicate cards from different sources by remote_node_id
Changeset #3311:
Message: some minor fixes
Changeset #3312:
Message: fix a compile warning
Changeset #3313:
Message: minor fixes for modular compiling
Changeset #3314:
Message: cccam: clear cards when client closed. fix recursive lock problem that messing ecm_idx when nok or cw not returned.
Changeset #3315:
Timestamp: 09/30/2010 01:56:37 PM
Author: Gorlan.Ng
Message: fix unsigned short millitm overflow
Changeset #3316:
Message: dvbapi: add support for ecms based on stream not channel that seen on 138E and 108.2E
Changeset #3317:
Message: fix bug in emm blocker
-
Changeset [3318] by alno
WebIf: Add failban overview and managing
Changeset [3319] by alno
WebIf: ad failbantime parameter to config
Changeset [3320] by rorothetroll
reset emm_global_len after reassenbling cw emm. Something is broken in emm …
Changeset [3321] by rebdog
readervideoguard: move more common code to reader-videoguard-common.c
Changeset [3322] by rorothetroll
fix a memcpy for the reassembled emm in the cw emm processing
Changeset [3323] by rorothetroll
more cw emm. fix the len of the final reassembled emm
Changeset [3324] by rorothetroll
updated the comments in the cw emm processing
Changeset [3325] by Gorlan.Ng
dvbapi: add some debug infos
Changeset [3326] by Gorlan.Ng
fix debug infos
Changeset [3327] by rebdog
readervideoguard: preparations for modular compiling
[Only registered and activated users can see links. Click Here To Register...]
-
Oscam-1.00-svn3336
[Only registered and activated users can see links. Click Here To Register...]
Changeset #3328:
Message: auth client: ip block/dyndns etc fixed cccam: reversed card exchange, first delete, then add
Changeset #3329:
Message: Documentation for new parameter 'failbantime'.
Changeset #3330:
Message: Limiting of SIDs on reader: 'ratelimitecm' and 'ratelimitseconds'.
Changeset #3331:
Message: Documentation update for 'updateinterval'.
Changeset #3332:
Message: Documentation update for 'updateinterval', again.
Changeset #3333:
Message: fix for Ticket #963
Changeset #3334:
Message: cccam: login-auth now showing crypted correct
Changeset #3335:
Message: remove udp pipes
Changeset #3336:
Message: cccam: changed card update order back to add new - remove old because of card looses
-
Changeset [3337] by rebdog
fixes for missing bracket warnings around cs_debug when compiled without …
Changeset [3338] by rebdog
fix mistakenly changed oscam-config.h defaults
Changeset [3339] by schlocke
cccam: reverted Gorlan.NG change for rekursive locks. Recursive looks are …
Changeset [3340] by rorothetroll
fix an error message in viaccess ecm
Changeset [3341] by schlocke
cccam: changed locking behaviour
Changeset [3342] by alno
fix for shutdown via monitorport Ticket #966
Changeset [3343] by _network
fix udp server (first request was always dropped)
Changeset [3344] by alno
change exit method in monitor modul
Changeset [3345] by alno
WebIf: reaktivate kill clients and restart readers from statusview
Changeset [3346] by rorothetroll
try to fix viaccess emm on some card. I commented the set provider code as …
[Only registered and activated users can see links. Click Here To Register...]
-
Oscam-1.00-svn3354
[Only registered and activated users can see links. Click Here To Register...]
Changeset #3347:
Message: make reader-irdeto threadsafe
Changeset #3348:
Message: fix for last commit
Changeset #3349:
Message: Reader specific code does not have to be globally visible anymore
Changeset #3350:
Message: Cleanup of module config
Changeset #3351:
Message: Let's not put everything in globals.h
Changeset #3352:
Message: fix ticket #975
Changeset #3353:
Message: fix compile error
Changeset #3354:
Message: compile error fixes
-
Oscam-1.00-svn3363
[Only registered and activated users can see links. Click Here To Register...]
Changeset #3355:
Message: globals.h remove client->cidx since it is silly to store index of client at client itself
Changeset #3356:
Message: oscam.c Integrate send_restart_cardreader and restart_cardreader seems more logical
Changeset #3357:
Message: add macro D_USE, if WITH_DUBUG is defined warns if variable is not used, if WITH_DEBUG is not defined prevents warning if variable is unused, but warns if variable is used, added D_USE to necessary variables to allow clean build when WITH_DEBUG is undefined
Changeset #3358:
Message: compile with dvbapi support when -DTUXBOX is set
Changeset #3359:
Message: ifd_smartreader.c : check for a fixed freq of 368 and set the smargo to 369. This could help with some nagra cards.
Changeset #3360:
Message: ifd_smartreader.c: some code cleanup
Changeset #3361:
Message: oscam.c Remove unused wait4master
Changeset #3362:
Message: module.*: Introduce client parameter, eliminating cs_idx looping
Changeset #3363:
Message: module.*: Introduce client param get_dcw, send_dcw
-
Oscam-1.00-svn3365
[Only registered and activated users can see links. Click Here To Register...]
changelog Zitat:
------------------------------------------------------------------------
r3365 | schlocke | 2010-10-03 22:56:21 -0700 (Sun, 03 Oct 2010) | 2 lines
cccam: updated partner detection
------------------------------------------------------------------------
r3364 | schlocke | 2010-10-03 14:55:00 -0700 (Sun, 03 Oct 2010) | 3 lines
cccam: changed UA format
cccam: updateded Partner detection
------------------------------------------------------------------------
-
Oscam-1.00-svn3373
[Only registered and activated users can see links. Click Here To Register...]
Changeset #3366:
Message: add debuging in an attempt to identify problem in ticket #894
Changeset #3367:
Message: cccam: Fixed Partner detection
Changeset #3368:
Message: cccam: Fixed partner detection fast_rnd() and seed globalized
Changeset #3369:
Message: Fix for 0919 blackscreen (temporary until we can find out what's going on)
Changeset #3370:
Message: cccam: Partner detection node id on server side also detectable
Changeset #3371:
Message: cccam: Fixed Partner detection
Changeset #3372:
Message: module.*: Introduce client param do_emm, cs_fake_client
Changeset #3373:
Message: module.*: Introduce client param in send_ecm routines
-
Oscam-1.00-svn3380
[Only registered and activated users can see links. Click Here To Register...]
Changeset #3374:
Message: module.*: Introduce client param in send_dcw routines
Changeset #3375:
Message: module.*: Introduce client param in recv routines
Changeset #3376:
Message: module.*: Introduce client param in client_init routines
Changeset #3377:
Message: oscam-reader.c: Fix wrong parameter in casc_recv_timer
Changeset #3378:
Message: WebIf: Correct failban time in overview
Changeset #3379:
Message: cccam: fixed client node id
Changeset #3380:
Message: fix issues with proxy readers
-
Oscam-1.00-svn3382
[Only registered and activated users can see links. Click Here To Register...]
------------------------------------------------------------------------
r3382 | schlocke | 2010-10-04 14:49:26 -0700 (Mon, 04 Oct 2010) | 2 lines
added pipe-error log output
------------------------------------------------------------------------
r3381 | schlocke | 2010-10-04 14:41:24 -0700 (Mon, 04 Oct 2010) | 2 lines
loadbalancer: removed pipehandling, now calling by thread
------------------------------------------------------------------------
r3380 | _network | 2010-10-04 13:18:38 -0700 (Mon, 04 Oct 2010) | 2 lines
fix issues with proxy readers
------------------------------------------------------------------------
-
[Only registered and activated users can see links. Click Here To Register...]
------------------------------------------------------------------------
r3384 | rorothetroll | 2010-10-05 15:57:08 -0700 (Tue, 05 Oct 2010) | 1 line
the viaccess command for set provider shoud use provid, not soid as the data for the command
------------------------------------------------------------------------
r3383 | rorothetroll | 2010-10-05 15:45:32 -0700 (Tue, 05 Oct 2010) | 1 line
I found a few issue in the viaccess emm. this change might fix emm update on some cards.
------------------------------------------------------------------------
r3382 | schlocke | 2010-10-04 14:49:26 -0700 (Mon, 04 Oct 2010) | 2 lines
added pipe-error log output
------------------------------------------------------------------------
-
Oscam-1.00-svn3396
[Only registered and activated users can see links. Click Here To Register...]
Changeset #3385:
Message: cccam: some adjustments for possible deadlock
Changeset #3386:
Message: dvbapi: fix ticket #991
Changeset #3387:
Message: camd35: fixed suppresscmd08
Changeset #3388:
Message: camd35: fixed suppresscmd08 in reader
Changeset #3389:
Message: cccam: node id is now global and only one time defined
Changeset #3390:
Message: max services count changed to uint64, so now 64 services could be defines (before: 32)
Changeset #3391:
Message: videoguard: fix for powerpc card init error and logging improvements
Changeset #3392:
Message: module.*: Introduce client param in recv_chk routines
Changeset #3393:
Message: oscam-reader.c Remove some cs_idx
Changeset #3394:
Message: oscam.c Remove port param in cs_fork; fix some compiler msg; remove checks on resolver + logger thread
Changeset #3395:
Message: oscam-reader.c : Remove cs_idx from hostResolve
Changeset #3396:
Message: dvbapi: more fix for ticket #991
-
[Only registered and activated users can see links. Click Here To Register...]
------------------------------------------------------------------------
r3400 | alno | 2010-10-06 13:51:10 -0700 (Wed, 06 Oct 2010) | 2 lines
failban: - add messages to -d1, Show real IP in debuglog
WebIf: failban overview - show left ban time in format [00d]:00:00:00
------------------------------------------------------------------------
r3399 | rorothetroll | 2010-10-06 12:29:33 -0700 (Wed, 06 Oct 2010) | 1 line
reader-viaccess.c : fix test for cached provid in do_emm
------------------------------------------------------------------------
-
Oscam-1.00-svn3408
[Only registered and activated users can see links. Click Here To Register...]
Changeset #3401:
Message: CMakeLists: enable debug for non MAC Platforms
Changeset #3402:
Message: Store client-ptr local per thread so client[cs_idx] can be eliminated
Changeset #3403:
Message: Unlimited clients step1: eliminate bulk of client[cs_idx] calls
Changeset #3404:
Message: Unlimited clients step2: eliminate idx and cs_idx from monitor and oscam-log
Changeset #3405:
Message: Unlimited clients step3: eliminate idx2ridx and replace use of pid by tid in http (only first step)
Changeset #3406:
Message: cccam: new option "ignore reshare" Change in card forwarding: cards are now only reshared, if card-reshare (maxdown) is > 0. If zero, card is not forwarded. This is now default
behaviour if "ignore reshare=0". With "ignore reshare=1" all cards are reshared with reshare-value of the reader/server webif now showing reshare values and node ids
Changeset #3407:
Message: Unlimited clients step4: eliminate some cs_idx stuff
Changeset #3408:
Message: Unlimited clients step5: replace ECM_REQ idx by pointer
-
Oscam-1.00-svn3418
[Only registered and activated users can see links. Click Here To Register...]
Changeset #3409:
Message: Unlimited clients step6: replace s_reader cidx by pointer
Changeset #3410:
Message: Documentation for new parameter 'ignorereshare'.
Changeset #3411:
Message: Unlimited clients step6: now really replace ECM_REQ idx by pointer
Changeset #3412:
Message: oscam.c: Simplify write_ecm_answer
Changeset #3413:
Message: Unlimited clients step7: replace EMM_REQ idx by pointer
Changeset #3414:
Message: cccam: ignorereshare limited to the smallest reshare-value of
reader/account/card
Changeset #3415:
Message: cccam: test for account "" not found - fix
Changeset #3416:
Message: set linker option to -ggdb for OS X in debug mode
Changeset #3417:
Message: attempt to fix some auprovid problems
Changeset #3418:
Message: cccam: removed rc4 check because initseed has now correct checksum for 2.0.11 clients
-
[Only registered and activated users can see links. Click Here To Register...]
------------------------------------------------------------------------
r3419 | schlocke | 2010-10-08 14:11:32 -0700 (Fri, 08 Oct 2010) | 2 lines
cccam: fixed webif-entitlement-crash
------------------------------------------------------------------------
r3418 | schlocke | 2010-10-08 12:18:24 -0700 (Fri, 08 Oct 2010) | 3 lines
cccam: removed rc4 check because initseed has now correct checksum for
2.0.11 clients
------------------------------------------------------------------------
-
[Only registered and activated users can see links. Click Here To Register...]
------------------------------------------------------------------------
r3424 | _network | 2010-10-09 02:28:02 -0700 (Sat, 09 Oct 2010) | 2 lines
fix http thread logging
------------------------------------------------------------------------
r3423 | _network | 2010-10-09 01:18:26 -0700 (Sat, 09 Oct 2010) | 2 lines
fix dvbapi compile error
------------------------------------------------------------------------
-
Oscam-1.00-svn3429
[Only registered and activated users can see links. Click Here To Register...]
Changeset #3425:
Message: dvbapi: clean some unnecessary code
Changeset #3426:
Message: fix for ticket #994. Some comment fixes in cryptoworks emm in dvbapi
Changeset #3427:
Message: commenting the debug code in module-dvbapi for cw emm-s processing as it has been reported to be working fine.
Changeset #3428:
Message: reverting changes from rev 3420, will work with original reporter of ticket 994
Changeset #3429:
Message: failban: new parameter in [account] added 'failban=0|1|2|4'
0 (default) do nothing
1 the case on anonymous - not yet implemented
2 ban IP of a disabled user on connect
4 ban IP of a sleeping user in the moment the sleep case occours
failbantime is not separately set - used from [global]
-
[Only registered and activated users can see links. Click Here To Register...]
------------------------------------------------------------------------
r3436 | dingo35 | 2010-10-10 02:28:13 -0700 (Sun, 10 Oct 2010) | 1 line
Unlimited clients step9: make client[] a linked list
------------------------------------------------------------------------
r3435 | dingo35 | 2010-10-10 01:57:48 -0700 (Sun, 10 Oct 2010) | 1 line
Suppress some compiler warnings
------------------------------------------------------------------------
-
Oscam-1.00-svn3447
[Only registered and activated users can see links. Click Here To Register...]
Changeset #3437:
Message: cs_fork: centralize setting of cl->ip
Changeset #3438:
Message: testcommit2
Changeset #3439:
Message: testcommit3
Changeset #3440:
Message: Unlimited clients step9: rewrite get_csidx
Changeset #3441:
Message: Unlimited clients step10: oscam.c rewrite idx_from_ip
Changeset #3442:
Message: Unlimited clients step11: oscam.c get rid of a lot of client
Changeset #3443:
Message: Unlimited clients step12: oscam.c get rid of a last removable client
Changeset #3444:
Message: Remove cs_idx define
Changeset #3445:
Message: Unlimited clients step12: oscam-log.c get rid of client
Changeset #3446:
Message: WebIf: disable and reload account (Ticket #946)
Changeset #3447:
Message: Monitorport: fix re-init accounts
