Printable View
"BlackShadow2 Ver 1 spec AzBox
Very fast skin.
This skin is copyright © protected and can not be used without my permission
So AzBox have my permission to use."
"Skin is in the hands of AzBox team.
This is first test version ...
Works very nicely and fast. "
............................................................by Matrix10
[Only registered and activated users can see links. Click Here To Register...][Only registered and activated users can see links. Click Here To Register...]
Enigma v1.0.26 by the_ripper and team
>>>>>>>>IMPORTANT !!!<<<<<<<<<<
Pentru acesta versiune este nevoie de noua versiune de AZUP
[Only registered and activated users can see links. Click Here To Register...]
Enigma2:
What is new :
DiseQc FIX ( 1.0 , 1.1 , 1.2 manual and USALS )
DVB-S2 FIX
Added /boot partition so no more errors durring installation of IPKG
Integrated BlackShadow2 Skin from Matrix10 ( thanks to Matrix10 ).
[Only registered and activated users can see links. Click Here To Register...]
BOOTING PROBLEM FIX !!!
After making flash, please imidiatelly go in RESCUE MODE ( Reboot box with USB Memory stick with patch.bin file inserted in RECEIVER ).
Telnet and FTP username and password are :
username: root
password: azbox
After RESCUE MODE show You IP of Your receiver , use putty and telnet to it and type this commands :
Code:mkdir /D
mount /dev/hda1 /D
Connect with FTP to Your Reciever, and go :
/D/etc/init.d and place this bootup file which is there.
Overwrite : YES
Eject USB, Turn off and Turn on Your receiver and all will be ok.
[Only registered and activated users can see links. Click Here To Register...]
---------- Post added at 09:48 ---------- Previous post was at 09:18 ----------
UPDATE pentru Enigma 2 1.0.25 (DiseQc Fix)
For those with DiseQc not working, download and unpack all files :
Go back to previous version of Enigma 2 1.0.25 and do this :
Go in rescue mode :
Code:mkdir /D
mount /dev/hda1 /D
FTP to Receiver :
File cx24116.ko copy to :
/D/lib/modules/2.6.22.19-19-the_ripper/extra/
When asked to Overwrite, say Yes
File Tunerinfo.py copy to :
/D/usr/lib/enigma2/python/Components
File enigma2 copy to :
/D/usr/bin
When asked to Overwrite, say Yes
Remove USB Stick, and turn off and turn on receiver so all will work.
[Only registered and activated users can see links. Click Here To Register...]
:!::!: : Toate versiunile prezentate pana in acest moment, sunt VERSIUNI PENTRU TEST !!!
un link util:
[Only registered and activated users can see links. Click Here To Register...]
Enigma 2 v1.0.27
Devices suitable for flashing : Elite and Premium
What is new :
- DiseQc FIX ( 1.0 , 1.1 , 1.2 Manual and USALS too )
- DVB-S2 FIX
- Integrated BlackShadow2 skin by Matrix10
- Fixed boot error
Download: [Only registered and activated users can see links. Click Here To Register...]
Enigma v1.0.27
ATTENTION: Use AzUP v1.1 for Flashing this version of Enigma 2 into Your devices !!!
How to use AZUp by @telesat
Because they appeared quasi instructions for AZUp use and procedures for the insertion of E2 in AZBox
I prepared a short and precise instructions - exactly what you need to do
btw , I must to mention , ignore wrong "tutorials" with wrong directions
as : you must use Format App realy funny because AZUp manage partitions of your AZBox
Ignore quasi instructions and use this official instruction from the author of AZUp
We have 3 situation :
I) You have Official FW in your AZBox andyou want to install E2
II) You have E2 in yourAZBox and now you want to install official FW
III) You have E2 in your AZBox and now you want to install new/update of E2
I) You have Official FW in your AZBox andyou want to install E2
Switch off AZBox
Put usb stick with patch.bin (e2)
switch on AZBox
Follow messages on GUI for update official FW (standard procedure)
After about 1 min , your receiver will reboot
Dont remove USB Stick from AZBox !!!
wait for IP adress on VFD of AZBox
Start latest ver of AZUp
Write IP adress in AZUp (see VFD)
Click on button Update
AZUp check for resque mode, also check ver of patch.bin (E2 or official fw)
AZUp create cramfs, Create 3 partition on DOM and formatted them
Copyng E2 kernel in Flash (about 2.5 min)
Copyng E2 files in first DOM partition (about 1 min)
when get popup msg - remove usb stick and wait for reboot (Rebooting... msg on VFD)
New E2 is installed successfully
II) You have E2 in yourAZBox and now you want to install official FW
Switch off AZBox
Put usb stick with patch.bin (Official FW)
switch on AZBox
wait for IP adress on VFD of AZBox
Start latest ver of AZUp
Write IP adress in AZUp (see VFD)
Click on button Update
AZUp check for resque mode, also check ver of patch.bin (E2 or official fw)
AZUp Create 4 partition on DOM and formatted them
Copyng Official (old) kernel in Flash (about 2.5 min)
when get popup msg - first part of update is done, but dont remove USB stick from AZBOX
wait for reboot , and follow messages on GUI for update official FW (standard procedure)
III) You have E2 in your AZBox and now you want to install new/update of E2
Switch off AZBox
Put usb stick with patch.bin (e2)
switch on AZBox
wait for IP adress on VFD of AZBox
Start latest ver of AZUp
Write IP adress in AZUp (see VFD)
Click on button Update
AZUp check for resque mode, also check ver of patch.bin (E2 or official fw)
AZUp create cramfs, Create 3 partition on DOM and formatted them
Copyng E2 kernel in Flash (about 2.5 min)
Copyng E2 files in first DOM partition (about 1 min)
when get popup msg - remove usb stick and wait for reboot (Rebooting... msg on VFD)
New E2 is installed successfully
am instalat E2_AZBox_1.0.27 si nu am semnal pe nicun satelit trebuie pus driver em8634dvb lib/modules/2.6.22.19-19-the_ripper/extra
?
normal nu, ai antena motorizata?
nu te astamperi deloc:)
New E2_AZBox_1.0.28
[Only registered and activated users can see links. Click Here To Register...]
What is new :
- Fix for no signal on DVB-S2 tuner for some users
- Multimedia fix for various formats by sattomy
Enigma 2 v1.0.29
Devices suitable for flashing : Elite and Premium
What is new :
- MyTube plugin (YouTube)
- Multimedia fix for various formats by sattomy
Download:
[Only registered and activated users can see links. Click Here To Register...]
ATTENTION : Use AzUP v1.1 for Flashing this version of Enigma 2 into Your devices !!!
Enigma 2 v1.0.30
Devices suitable for flashing : Elite - Premium - Premium+
What is new :
- P+ tuner driver tested
- P+ FAN control enabled and activated
- some fixes in audio - volume control now is ok, mute/unmute also
- plus few more fixes
[Only registered and activated users can see links. Click Here To Register...]
Enigma 2 v1.0.30
Devices suitable for flashing: Elite- Premium- PREMIUM PLUS
pentru Elite/Premium:
cei ce au probleme la instalare si va apare mesajul "Elite" sau "Premium"
[Only registered and activated users can see links. Click Here To Register...]Code:go to rescue mode ,telnet to receiver and mount DOM, for example
#/>mkdir DOM
#/>mount /dev/hda1 /DOM
then FTP to receiver and replace file /DOM/lib/modules/2.6.22.19-19-the_ripper/extra/em8634dvb.ko with one attached with this message.
Then just reboot.
---------- Post added at 09:01 ---------- Previous post was at 08:48 ----------
Enigma 2 v1.0.31
Devices suitable for flashing : Elite - Premium - Premium+ - Ultra
What is new :
- Added support for DVB-S2 Tuner in Ultra model
- Volume UP and Down Mute and Un-Mute for all models
- Few more fixes
[Only registered and activated users can see links. Click Here To Register...]