Hadu - CCCam

HaduSer version 1.000


Introduction:

HaduSer is a tool for Hadu (a CardSharing Client plugin for
DVB softwares on PC using DVB TV-Cards with Windows Vista or Seven.


[Only registered and activated users can see links. Click Here To Register...]

Hadu - CCCam 0.1.2.2:



-Workaround for CCCam version 1.2.3. Hadu is now considered back as a 2.0.11 version client by default. Furthermore, it's possible to modify the client version sent to the server (see "Version" option).


[Only registered and activated users can see links. Click Here To Register...]

Eu nu reusesc deloc sa le fac sa mearga...

Quote:

---

Originally Posted by skycleaner [Only registered and activated users can see links. Click Here To Register...]

Eu nu reusesc deloc sa le fac sa mearga...

---

Este usor de pornit, ai 2 fisiere --- Hadu.dll si Hadu.cfg astea 2 trebuie copiate in Plugin sau pot fi puse direct la radacina... Exemplu - progdvb/plugin sau direct progdvb/


In Hadu.cfg se editeaza 1 linie manual...sau foarte usor cu Hadu Server Editor

[Serv_1]
Server=CCCam:MyServer.com:12000:0:USER:PASS

...linia F cu USER si PASS facuta in Dream / server sa fie activa

cate servere se pot pune, si se deschid in hadu?

Eu am testat cu 5 servere şi nu au fost probleme. Sigur poţi pune mai multe.





.

intreb pentru ca am pus 8 servere si nu deschide decat 5 maxim. oare asta e limita? multumesc.

Se pot adauga 32 de linii, insa nr. maxim de servere active este de 6.

multumesc, intre timp am mai incercat si deschide 6, dar nu mai mult si acum imi confirmi si tu. bafta.

Here are the main current limits applied into the plugin:

-Maximum number of CCCam servers (active or not active): 64
-Maximum number of active CCCam servers : 6
-Maximum number of nodes per server : 2048
-Maximum number of providers per nodes : 16
-Maximum number of hops per node : 8 (though more than 3 or 4 is probably useless)
-Maximum number of CAID/providers entries into to "CAIDProv" and "NoCAIDProv" options : 32
-Maximum number of nodes/CAID entries into to "NoNodeCAID" option : 32
-Maximum number of CAID/CAID/provider/SIDs entries into to "CAIDTunnel" option : 32
-Maximum number of SIDs entries into to "NoSID" option : 64
-Maximum length size for server name and URL/IP address : 128
-Maximum length size for user and password: 20 for the user, 128 for the password
-Maximum number of CAID/providers entries into to "PrioCAIDProv" option : 32


.

Hadu - CCCam...0.1.2.3


[Only registered and activated users can see links. Click Here To Register...]



-EMM support (still experimental),
-possibility to indicate a static Node ID added,
-ECM process largely modified. If this new version doesn't work properly for you, get back to your former version,
-controls concerning the ECM provider completed,
-default value for the "WantEmus" option is now set to [0=No],
-memory occupation for each server lowered,
-several other bug fixes and minor enhancements.

0.1.2.4:
-server build display added (Server Infos window),
-DCWsOneServ general option added (though it's not recommended to change it),
-several bug fixes concerning the connection step. The timeout value for connections is now 3 times the timeout value for ECM receptions,
-changes within the internal events process (clean up and bug fixes),
-NonStd server option added, relative to some CCCam server emulation (i.e. servers with a non standard CCCam server behavior, probably due to a modified software or an emulation). A warning is eventually displayed about possible such kind of servers in the Server Infos window,
-size for Monitor and Server Infos windows saved into Hadu.ini (if changed by the user),
-internal option NoDelay set back to a safer value by default (due to too many crashes or hangs with several DVB applications). You can now remove the "Nodelay=0" configuration line within your Hadu.ini file, if you've set it before,
-reinforcement of the received CCCam data controls,
-modification for the status of the CCCam servers when started (Monitor window),
-simplification concerning the ECM PID selection. If an ECM PID is now forced (using the ECM list into the Monitor window) and if the result is unsuccessful, a full standard retry then occur (i.e. using all the possible nodes and CAIDs, and respecting the priority rules defined). The "Cancel manual ECM PID selection" menu has been removed (no more used),
-support of the main CCCam "checks": commands 05, 0B, ... The former workaround for command 05 checks has been removed. The main check currently occurs after more than 2 hours (i.e. long session),
-a few modifications or adds concerning the informations logged,
-for users using also HaduSer, please upgrade to HaduSer version 1.0.0.2 (or else exchanges with this new version of Hadu is no more possible).

Download [Only registered and activated users can see links. Click Here To Register...]

Hadu - CCCam...0.1.2.5


[Only registered and activated users can see links. Click Here To Register...]

0.1.2.5:
-several major bug fixes, mainly if 2 or more servers are used (but not only),
-correct support of the server rejection for the user connection. Possible error messages returned by the server are now displayed at the bottom at the Server Infos window,
-"IgnoreProvFor" option added, to ignore the provider checks for one or several CAID. It may be needed for instance, if the CAID tunneling feature (Betacrypt<--->Nagra3) is no more working properly in your case (set "IgnoreProvFor=1702" for the concerned server).

[Only registered and activated users can see links. Click Here To Register...]


0.1.2.6:
-temporary workaround for OSCAM servers (see "OSCAMWa" option, and all the comments for it) added as a possible option,
-possibility to have only EMM active added (see "EMMAlone" option),
-the maximum number of providers per nodes has been increased to 40,
-possibility to update more than one card (i.e. node) of the same CAID for EMM purposes added,
-bug fix for nodes with too many providers,
-transparency for Monitor and Server Infos windows added (see "UseTransparency" option for more details),
-"IgnoreProvFor" option now also used for EMMs,
-providers are no more checked for Betacrypt CAIDs (ECMs and EMMs). So, you can remove your "IgnoreProvFor=1702" or "IgnoreProvFor=1722" option lines if you wish,
-bug fix for BetaCrypt EMMs process,
-bug fix concerning the DCWsOneServ option,
-bug fix for the emulator nodes recognizing,
-modification for the non standard CCCam servers and the corresponding "NonStd" option: it's now supposed to work automatically (see "NonStd" option for more details),
-bug fixes concerning different particuliar cases when several servers are in use,
-bug fix for incorrect behavior of server connections when the plugin is deactivated,
-bug fix because current ECMs were not sent immediately when a new server is activated (if several servers are active and at least one is OK),
-by default value has been changed for the MaxConnections and MaxECMPIDs options. You'll have to manually modify your current Hadu.ini file, if you plan to use these new by default values,
-number of active CCCam servers at the same time no more limited to 6 (but still limited to a maximum of 64 CCCam servers, active or not active). Set the new by default values for the MaxConnections and MaxECMPIDs options, if several servers are in use,
-bug fixes for a possible improper re-connection when the disconnection has been provoked externally (network and/or distant server),
-bug fix for Viaccess "long" ECMs (for TNTSat mainly),
-size for Monitor and Server Infos windows now also saved into Hadu.ini (if changed by the user) when pushbutton "OK" is pressed. Furthermore, the size of the columns for the different lists of these windows is now also saved,
-it's now possible to sort the nodes list into the Server Infos window for some columns,
-reject of null DCWs (processed as 'No decoding'),
-some other bug fixes and minor enhancements.

voua vi se mai conecteaza hadu? ca la mine nu mai vrea