Printable View
La aceasta imagine merge cardul de TVR, e deja un exemplu in cwshare.cfg pe care il dai jos de pe server, si citeste in topicul de mbox ce trebuie sa mai faci.
Ca sa porneasca newcs la start activezi din Blue Pannel > NewCS> Newcs auto ON apoi restartati.
Ca sa nu mai aveti NewCS activ (si recomand sa nu fie activ daca nu aveti card pe Kathy), dai NewCS auto OFF cand termini testele. Implicit nu se incarca Newcs si nici driverele de
no idea to this question?Quote:
Originally Posted by aldente [Only registered and activated users can see links. Click Here To Register...]
I have a hdd 500 GB with partition :Quote:
Originally Posted by aldente [Only registered and activated users can see links. Click Here To Register...]
sda1 fat32
sda2 with label XBA -BA
sda3 with label XSYS2 - enigma2
sda4 with label XSYS3 - for fatload
If i want to see fat32 partition , in telent, do this command :
mount /dev/sda1 /media/hdd
after this with file manager i can see fat32 partition.
maybe this help you.
Module responsabil for this incovenient is : stmdvb.koQuote:
Originally Posted by htibi58 [Only registered and activated users can see links. Click Here To Register...]
who has this problem, can change the file in the zildan image with file from tdt 600 .Remember : the file is located in / lib/modules
for scart is not a solution
Quote:
Originally Posted by hd56fox [Only registered and activated users can see links. Click Here To Register...]
Thanks alot hd56fox, :clap2:
Ok that works but can you make the mount stay even after a reboot, for me the mount wont stick when i reboot ?
@Zildan: You maybe can look in to this and imlement it in your next release. From what i read in other forum AAF image see the fat32 without any external commands. But i rather use your image....thanks and keep up the good work. :thx:
1)Am facut un stik cu trei partitii dupa metoda de boot cu fatload.Fara sa copiez directorul boot pe partitia XSYS3-fat 32 si fara modificarea bootconf din ba, E2 face boot tot in aprox 90 de secunde.
Daca faci stik-ul cu 4 partitii din Barry Allen, face boot in 4 minute, are cineva o explicatie?
2)Am instalat skin-ul dreamTV-HD, e superb, dar vedeam mai multe ecrane verzi decat imagine, dupa ce am pus si skin.xml adecvat parca si-a mai revenit, mai trebuie modificat ceva ptr el ca sa fie stabila imaginea?cred ca asta trebuia sa postez in alt thread, scuze.
3)@ZILDAN, citisem toate topicurile de la sectiunea Mbox, legat de problema Newcs, la mine e vorba de xml, acolo cred ca e ceva in neregula, pur si simplu nu vede cardul, Mbox se leaga cu Newcamd, interfata phoenix nu vrea sa mearga, am tot schimbat la parity pe none, even, odd cu normal si inverse reset, nici nu miroase cardurile (hocus, tvr), la voi merge cu setarile implicite?O fi murit phoenixul meu, hmmm...
If you want to stay after reboot you must write a line in ftsab fileQuote:
Originally Posted by zazabraza [Only registered and activated users can see links. Click Here To Register...]
This file is in /etc
Line is like this :
/dev/sda1 /hdd/movie auto defaults 0 0
To see the name of device you can write in telent this :
fdisk -l
After this you can record on partion on hardisk.
This version run fine on SATA.
I have on SATA HDD 3 partitions:
fdisk -l
Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 1 62 497983+ 83 Linux
/dev/sda2 63 124 498015 83 Linux
/dev/sda3 125 9729 77152162+ 83 Linux
I installed BA and BA BOOT in the first partition (sda1 ext2), in sda2 (ext2) e2 RSP, and last partition (sda3 ext3)is mounted in /media/hdd/video for recording.
Put in /var/fstab last line like:
/dev/sda3 media/hdd/movie auto defaults 0 0
for automount on boot.
edit bootp.conf
Code:ASSIGNUSBDEVICES=n
MOUNTDIFFERENT=0
BADEVICE=/dev/sda2
BADEVID=0:2
IPADDR=192.168.xxx.xxx
SERVERIP=192.168.xxx.xxx
GATEWAY=192.168.xxx.xxx
BOOTARGS=console=ttyAS0,115200 root=$badevice rw ip=$ipaddr:$serverip:$gateway:255.255.255.0:kathrein:eth0:off mem=64m coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=6 nwhwconf=device:eth0,hwaddr:$ethaddr init=/bin/devinit
BOOTCMD=ide reset;ext2load ide $badevid a5000000 boot/uImage;bootm a5000000
salut zidan si daca am un hdd s-ata mai mare (320gb) si-l impart in 4 partitii , unde :
- 1 partitie (sda1 ext2) unde va fii inst. BA si BA boot
- 2 partitie (sda2 ext2) unde va fii inst. e2 RSP 1.1
- 3 partitie (sda3 ext2) unde va fii inst. e2 AAF xMAS
- 4 partitie (sda4 ext2) unde va fii "magazia" pt. inregistrari
Put in /var/fstab last line like:
/dev/sda4 media/hdd/movie auto defaults 0 0 for automount on boot
aceasta linie banuiesc ca ramane valabila si zi-mi si mie care ar fii "capacitatea maxima" pt. partitionare la hdd de 320gb la primele 3 partitii
in prezent folosesc stick-ul usb de 4gb impartit :
- 1 partitie 560mb
- 2 partitie 555mb
- 3 partitie 550mb
- 4 partitie restul pana la 3,75gb cat vede stick-ul kcc-3.1
multumesc anticipat pt. info
Deci nu exista capacitate maxima din cate stiu, dar minim sa pui 500 mega. Iti recomand sa folosesti ext3 la partitia 4.
Faci format cu comanda:
mkfs.ext3 /dev/sda4 -L "RECORD"
ca sa ai si label RECORD, sa iti mearga si in AAF partitia la inregistrare fara sa fie necesara adaugarea in fstab.
La AAF e un executabil sutomount. In viitoarele versiuni RSP o sa pun si eu un script de automount.
I use image on stick, in front of kathy.
I use usb-hdd with own power supply.
But, my kathy won't boot if hdd power is ON :dance:
If I use hdd power OFF, it is OK.
How to solve this trouble, anyone :)
Put stick in back bottom USB port, and hdd in back top port.
RULE 12
Thank,s
Works OK :cheers:
Some providers sometimes use AAC sound. I think that ST7100 can handle the MPEG AAC sound format. Is there any trick to hear with Kathrein this specially sound?
Felicitari ZILDAN...super imagine ...sunt intarziat , am fost plecat...
Am instalat pe stik fara probleme dar nu pot configura netul. Ii dau valorile corecte ca la AAF dar spune ca nu e corect. Ajutor va rog!!
tedugoroma > La instalarea pe stick in partitie trebuie sa configurezi intr-o caseta ce-ti apare inainte de instalarea e2 IP-ul boxului , IP-ul serverului si Gateway , dupa care mi-a aparut IP- ul si Gate-ul in E2 gata setate , mai putin Nameserver unde pui IP-ul routerului . Cred ca tre sa reiei instalarea ...urmeaza ghidul Zildan de [Only registered and activated users can see links. Click Here To Register...].
citat din bobob "tedugoroma > La instalarea pe stick in partitie trebuie sa configurezi intr-o caseta ce-ti apare inainte de instalarea e2 IP-ul boxului , IP-ul serverului si Gateway , dupa care mi-a aparut IP- ul si Gate-ul in E2 gata setate , mai putin Nameserver unde pui IP-ul routerului".
Am si eu aceeasi problema. Pt un incepator poti fi un pic mai detaliat, cu pasii care trebuie urmati. Multumesc pentru bunavointa.
In KKC inainte de instalarea imaginii!!
Cred ca acolo am uitat sa pun valorile corecte:oops:
Mersi!!
In KCC inainte de instalarea imaginii E2 iti apare o caseta in care sunt solicitate cele 2 IP-uri si GW....exact cum a precizat si tedugoroma ...citeste cu atentie ghidul de instalare al lui Zildan are si poze si este foarte explicit...il gasesti mai sus , doar apasa "aici" ...bafta !Quote:
Originally Posted by profitor [Only registered and activated users can see links. Click Here To Register...]