HD900 USB-RS232 Card reader extern Pheonix

Am pus phoenix cu mgcamd+newcs+rs232 si a mers (card TVR).

Am trecut la mbox+newcs+rs232 si nu merge sa citesc local cardul.

La debug imi apare:

*************** New Start 11.10.2008 19:49:19 ***************

[19:49:19] STAPI INIT ... OK :)
[19:49:19] ExYuSAT Team [Only registered and activated users can see links. Click Here To Register...] , [Only registered and activated users can see links. Click Here To Register...]
[19:49:19] Starting MBOX version 0.4 BETA (build 0012) coded by The_Ripper
[19:49:19] This program is for educational & informational purposes only!!
[19:49:19] Donation to project: [Only registered and activated users can see links. Click Here To Register...]
[19:49:19] ===> Local Mode <===
[19:49:19] Reading cwshare.cfg ...
[19:49:19] Trying to get online,please wait ...
[19:49:19] Total 1 newcamd server(s) to connect
[19:49:19] Creating ecm parser thread ...OK
[19:49:19] Creating timer thread ...OK
[19:49:19] Creating newcamd worker thread ...OK
[19:49:19]
[19:49:19] ReReading pmt.tmp
[19:49:19] ==================================================================
[19:49:19] ECM: CA ID: 0x1702 Nagravision -> CA PID: 0x1009
[19:49:19] ECM: CA ID: 0x1722 Nagravision -> CA PID: 0x1009
[19:49:19] ECM: CA ID: 0x1830 Nagravision -> CA PID: 0x1948
[19:49:19] ECM: CA ID: 0x1833 Nagravision -> CA PID: 0x1848
[19:49:19] ECM: CA ID: 0x1834 Nagravision -> CA PID: 0x1C48
[19:49:19] ECM: CA ID: 0x09C4 NDS -> CA PID: 0x1B48
[19:49:19] ECM: CA ID: 0x1801 Nagravision -> CA PID: 0x1648
[19:49:19]


La restart a plecat pe premiere.


==================================================================
[19:49:19] [newcamd] Trying to connect to newcamd server (127.0.0.1:10110)
[19:49:19] [newcamd] Connected to (127.0.0.1:10110) ...
[19:49:19] [newcamd] Got card with CaID 0x0500 and 3 number(s) of ProvID (127.0.0.1:10110)
[19:49:19] [newcamd] Card: CaID 0x0500 ProvID: 0xFFF720 (127.0.0.1:10110)
[19:49:19] [newcamd] Card: CaID 0x0500 ProvID: 0x025900 (127.0.0.1:10110)
[19:49:19] [newcamd] Card: CaID 0x0500 ProvID: 0x025910 (127.0.0.1:10110)
[19:49:19] [newcamd] Creating newcamd worker thread for (127.0.0.1:10110) ...
OK
[19:49:38]
[19:49:38] ReReading pmt.tmp
[19:49:43]
[19:49:43] ReReading pmt.tmp
[19:49:43] ==================================================================
[19:49:43] *ECM: CA ID: 0x0500 Viaccess (00000000) -> CA PID: 0x0032
[19:49:43] *ECM: CA ID: 0x0500 Viaccess (00000000) -> CA PID: 0x0033
[19:49:43] *ECM: CA ID: 0x0500 Viaccess (00000000) -> CA PID: 0x0034
[19:49:43] ==================================================================
[19:49:43] Searching CW cache for CaID 0x0502, pid 0x0032...no CW in cache
[19:49:43] Dropping local ECM , caid:0x0502, ecmpid:0x0032, sidpid:0x0002 cant decode localy
[19:49:43] Searching CW cache for CaID 0x0502, pid 0x0033...no CW in cache
[19:49:43] Dropping local ECM , caid:0x0502, ecmpid:0x0033, sidpid:0x0002 cant decode localy
[19:49:43] Searching CW cache for CaID 0x0502, pid 0x0034...no CW in cache
[19:49:43] Dropping local ECM , caid:0x0502, ecmpid:0x0034, sidpid:0x0002 cant decode localy
[19:49:51] Searching CW cache for CaID 0x0502, pid 0x0032...no CW in cache
[19:49:51] Dropping local ECM , caid:0x0502, ecmpid:0x0032, sidpid:0x0002 cant decode localy
[19:49:51] Searching CW cache for CaID 0x0502, pid 0x0033...no CW in cache
[19:49:51] Dropping local ECM , caid:0x0502, ecmpid:0x0033, sidpid:0x0002 cant decode localy
[19:49:51] Searching CW cache for CaID 0x0502, pid 0x0034...no CW in cache
[19:49:51] Dropping local ECM , caid:0x0502, ecmpid:0x0034, sidpid:0x0002 cant decode localy
[19:50:01] Searching CW cache for CaID 0x0502, pid 0x0032...no CW in cache
[19:50:01] Dropping local ECM , caid:0x0502, ecmpid:0x0032, sidpid:0x0002 cant decode localy
[19:50:01] Searching CW cache for CaID 0x0502, pid 0x0033...no CW in cache
[19:50:01] Dropping local ECM , caid:0x0502, ecmpid:0x0033, sidpid:0x0002 cant decode localy
[19:50:01] Searching CW cache for CaID 0x0502, pid 0x0034...no CW in cache
[19:50:01] Dropping local ECM , caid:0x0502, ecmpid:0x0034, sidpid:0x0002 cant decode localy
[19:50:11] Searching CW cache for CaID 0x0502, pid 0x0032...no CW in cache
[19:50:11] Dropping local ECM , caid:0x0502, ecmpid:0x0032, sidpid:0x0002 cant decode localy
[19:50:11] Searching CW cache for CaID 0x0502, pid 0x0033...no CW in cache
[19:50:11] Dropping local ECM , caid:0x0502, ecmpid:0x0033, sidpid:0x0002 cant decode localy
[19:50:11] Searching CW cache for CaID 0x0502, pid 0x0034...no CW in cache
[19:50:11] Dropping local ECM , caid:0x0502, ecmpid:0x0034, sidpid:0x0002 cant decode localy
[19:50:21] Searching CW cache for CaID 0x0502, pid 0x0032...no CW in cache
[19:50:21] Dropping local ECM , caid:0x0502, ecmpid:0x0032, sidpid:0x0002 cant decode localy
[19:50:21] Searching CW cache for CaID 0x0502, pid 0x0033...no CW in cache
[19:50:21] Dropping local ECM , caid:0x0502, ecmpid:0x0033, sidpid:0x0002 cant decode localy
[19:50:21] Searching CW cache for CaID 0x0502, pid 0x0034...no CW in cache
[19:50:21] Dropping local ECM , caid:0x0502, ecmpid:0x0034, sidpid:0x0002 cant decode localy
[19:50:31] Searching CW cache for CaID 0x0502, pid 0x0032...no CW in cache
[19:50:31] Dropping local ECM , caid:0x0502, ecmpid:0x0032, sidpid:0x0002 cant decode localy
[19:50:31] Searching CW cache for CaID 0x0502, pid 0x0033...no CW in cache
[19:50:31] Dropping local ECM , caid:0x0502, ecmpid:0x0033, sidpid:0x0002 cant decode localy
[19:50:31] Searching CW cache for CaID 0x0502, pid 0x0034...no CW in cache
[19:50:31] Dropping local ECM , caid:0x0502, ecmpid:0x0034, sidpid:0x0002 cant decode localy


Ce se intimpla, nu am imagine?

lipsa mgcamd ( alte emu parca nu pot lucra corect cu ecm TVR )

Salut,

Tot eu :). Va rog, mai am nevoie de un pic de ajutor de la voi.
Cum stau acum: m-am folosit de sfaturile voastre si am un card focussat in interfata phoenix.

Normal [Only registered and activated users can see links. Click Here To Register...], nu reusesc sa vad vreun canal codat din grila focus. Nu mai zic nimic de sharing , eu vreau acum sa fac sa functioneaze cardul asta in phoenix. Mentionez ca in receptorul de la ei cardul este functional, deci nu e o problema cu el.

Am cules informatii despre ce si cum trebuie sa fac si:
-am instalat in receptor mbox ultima varianta, am pornit emu mbox+newcs, am pornit scriptul de serial+USB. Totul cum a descris snow in postul 14 de mai sus.
-am urcat cu ftp-ul fisierele postate de catre voi: (mbox.cfg, cwshare.cfg, add.data, 10110.list) in folderul var/keys si newcs.xml in folderul var/tuxbox/config. le-am setat la toate atibutul 755
-am instalat pe calculator mbox control center; am creat un profil, s-a conectat la receptor

Ce cred eu ca nu este in regula:
1.Motoru, spuneai intr-un post mai sus ca s-ar putea ca la cardul focussat sa difere frecventa cuartului. In newcs.xml postat de snow aceasta valoare este de 357. Ramane asa sau trebuie schimbata?
2.cand dau restart Mbox de la butonul din control center, in stanga jos scrie pasii pe care ii face. Se opreste cu eroare atunci cand se pare ca citeste mbox.cfg. Iata care este descrierea acestei erori:
===========
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
===========
3.In mbox control center are in meniu un tab numit "Newcs" si care deschide o forma ce iti ofera posibilitatea sa te conectezi, sau cel putin asa cred eu, la newcs. Ce setari trebuie in acele campuri?: IP-adress/DNS (eu am incercat si cu IP-ul receptorului(192.168.1.10) si cu 127.0.0.1 cel folosit, am vazut, in cwshare.cfg), Port(am incercat si cu 10110 si cu 14000), Password(am incercat si cu dummy si cu newcs si fara nimic). Mesajul dupa apasarea butonului "Connect" este invariabil acelasi: "Connection is forcefully rejected"
4.Din telnet la comanda mbox.sh40 iata ce se intampla:
=============
-sh-3.00# mbox.sh40
[12:21:04] STAPI INIT ... OK :)
[12:21:04] ExYuSAT Team [Only registered and activated users can see links. Click Here To Register...] , [Only registered and activated users can see links. Click Here To Register...]
[12:21:04] Starting MBOX version 0.4 BETA (build 0019) coded by The_Ripper
[12:21:04] This program is for educational & informational purposes only!!
[12:21:04] Donation to project: [Only registered and activated users can see links. Click Here To Register...]
[12:21:04] ===> Net Mode <===
[12:21:04] Reading cwshare.cfg ...
[12:21:04] Trying to get online,please wait ...
[12:21:04] Total 1 newcamd server(s) to connect
[12:21:04] Creating ecm parser thread ...OK
[12:21:04] Creating timer thread ...OK
[12:21:04] Creating newcamd worker thread ...OK
[12:21:04]
[12:21:04] ReReading pmt.tmp
[12:21:04] [newcamd] Trying to connect to newcamd server (127.0.0.1:10110)
[12:21:05] [newcamd] Connected to (127.0.0.1:10110) ...
[12:21:05] [newcamd] Failed to read network stream or read time-out or server gone offline (127.0.0.1:10110).
[12:21:05] [newcamd] Login request was rejected (127.0.0.1:10110).
[12:21:05] [newcamd] Trying to connect to newcamd server (127.0.0.1:10110)
[12:21:05] [newcamd] Connected to (127.0.0.1:10110) ...
[12:21:05] [newcamd] Failed to read network stream or read time-out or server gone offline (127.0.0.1:10110).
[12:21:05] [newcamd] Login request was rejected (127.0.0.1:10110).
=============
Nu stiu, pare ca se conecteaza la interfata(Connected to (127.0.0.1:10110)) dar gaseste serverul oprit(... or server gone offline)!!

Din experineta voastra, aveti idee unde este buba (sau bubele)?

Multumesc pentru orice sfat,
Rocco

357 e bun pt focus, la ora aceea nu ma informasem suficient cu frecventele, e absolut corect ce a scris snow.
Daca ai facut tot ce scrie acolo trebuie sa mearga !

important:
- in mbox.cfg D { 2 }
- in cwshare.cfg introduci linia C: { 127.0.0.1 10110 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 } { 10 } { 0B000000:0B000000;} si pui localul prioritar cu linia H: { 0B000000; }
-in 10110.list pui SF: { 0000 }

pt sharing(network mode) trebuie sa-ti pui linie M (host and pass)+hostIP+setare rooter, exista tutoriale pt asta.


daca nu te descurci iti trimit fis gata configurate.

Salut,

Va rog, ma poate ajuta cineva?
Nu reusesc sa "pornesc" cardul f___ss_t din phoenix, nu vad niciun canal codat.
In plus de postul meu de mai sus am constatat ca:
-daca pornesc din telnet mbox.sh40, incepe sa scrie in debug.txt din folderul temp: Iata ce imi apare atunci cand browsez pe canalele codate:
[00:01:46] ReReading pmt.tmp
[00:01:46] ==================================================================
[00:01:46] ECM: CA ID: 0x0B00 Conax -> CA PID: 0x011F
[00:01:46] ==================================================================
[00:01:49]
[00:01:49] ReReading pmt.tmp
[00:01:49] ==================================================================
[00:01:49] ECM: CA ID: 0x0B00 Conax -> CA PID: 0x012F
[00:01:49] ==================================================================

Cele 2 PID-uri de mai sus corespund la TVR1 si TVR2.

Ce concluzii trag de aici:
-scriptul de serial-usb este instalat corect
-cardul se simte, ca nu i-am spus nicaieri ca e conax
-ceva, ceva tot face configurarea mea mbox+newcs. dar...
-ce e insa gresit? newcs.xml, mbox.cfg, cwsare.cfg sau 10110.list?

Alte intrebari?
-pentru card conax, cazul meu, in newcs.xml linia "<!-- <boxkey>0000000000</boxkey> -->" trebuie decomentata sau nu? Si daca da, ce trebuie in loc de "0000000000"?
-nu mi-e foarte clar ce versiune de mbox ruleaza pe receptorul meu. De unde vad aceasta informatie? Eu ce-am facut: am luat ultima versiune de mbox, am copiat fisierele prin ftp in var/bin si am rulat din telnet fisierul mbox.sh40. E bine sau nu?

Multumesc,
Rocco

foloseste newcs.xml-ul de aici
vezi ca-n var keys trebuie sa mai ai si newcamd.list
spune-mi ce ai in 10110.list

Quote:

---

Originally Posted by snow [Only registered and activated users can see links. Click Here To Register...]

foloseste newcs.xml-ul de aici
vezi ca-n var keys trebuie sa mai ai si newcamd.list
spune-mi ce ai in 10110.list

---

Salut,

Eu acum sunt la job, diseara de abia astept sa pun in practica e ai spus.

Alte date:
-1. Undeva se pare ca mi-a scapat informatia cum ca ar fi trebuit si fiserul "newcamd.list". Asa e, nu il am, mersi ca ai observat. Am cautat acum pe forum si nu am gasit decat ceva mai vechi postat de otheitis:
#CWS_KEEPALIVE = 300
#CWS_INCOMING_PORT = 12000
CWS = 192.168.1.5 10110 abipbox abipbox 01 02 03 04 05 06 07 08 09 10 11 12 13 15
CWS = 192.168.1.5 10111 abipbox abipbox 01 02 03 04 05 06 07 08 09 10 11 12 13 15
#lan newcs

E bine?
-la mine, de fapt, IP-ul asta va fi 192.168.1.10
-textul abipbox e ok?
-2. newcs.xml atasat de tine acum difera de cel al meu(care este tot de la tine dintr-un post mai vechi) prin linia asta care e acum in plus: <autosid>no</autosid>. O sa-l modific in consecinta.
-3. 10110.list contine o singura linie, si anume:
SF: { 0000 }


Mersi mult snow,
rocco

CWS = 127.0.0.1 10110 abipbox abipbox 01 02 03 04 05 06 07 08 09 10 11 12 13 15
CWS = 127.0.0.1 10111 abipbox abipbox 01 02 03 04 05 06 07 08 09 10 11 12 13 15

Asa sa il pui....Eu am folosit pe ip care am avut la ipbox atunci.Cu asta o sa merge 100%
orice ip si sa ai pe ipbox.

Salut,

Am facut toate setarile in toate fisierele asa cum m-ati indrumat.
Din pacate nu reusesc nicicum sa pornesc tot mecanismul asta mbox+newcs+phoenix, pur si simplu nu se deschide niciun canal codat.
Va rog, ca sa ma linistesc si eu, imi poate raspunde cineva la aceste 3 nelamuriri?
Folosesc MBOX control center. Tool-ul asta(care arata foarte bine, pacat ca nu are si un help) imi indica 3 posibile probleme, si anume:
-1. in tab-ul telnet la comanda mbox.sh40 dupa linia in care se comunica faptul ca s-a conecatat la device ([12:21:05] [newcamd] Connected to (127.0.0.1:10110) ...) lucrurile nu mai sunt ok. Mesajele sunt ([12:21:05] [newcamd] Failed to read network stream or read time-out or server gone offline (127.0.0.1:10110).) si ([12:21:05] [newcamd] Login request was rejected (127.0.0.1:10110).). Am cautat pe net dar numai o singura pagina imi gaseste pe google(numai ca e ceva adiacent despre o altfel de problema). Altceva ce nu inteleg este daca acest server de newcs trebuie pornit in mod explicit de undeva sau nu.
-2. daca dau restart MBOX de la butonul dreapta sus, dupa ce trece prin pasii(ii scrie in fereastra aplicatiei in bara de dialog din stanga jos) de connect ok, kill ok, la citirea mbox.cfg procesul crapa: mesajul de eroare este nespecific "An invalid argument was supplied" - pare ca e din .net framework - si aplicatia se inchide.
-3. in tabul newcs exista, sau asa pare, o metoda de conectare la serverul newcs. Orice configurare am facut pe IP, port, parola mesajul a fost invariabil acelasi: "Connection is forcefully rejected".

Rugamintea mea este sa imi confirmati sau nu daca aceste 3 chestii se intampla si la voi. Si daca stiti vreo solutie pentru ele.

Multumesc mult pentru orice sugestie,
rocco

Incearca sa pui fisierele prin conectare ftp in fiecare director asa cum ti-am trimis im email .

Quote:

---

Originally Posted by rocco2007r [Only registered and activated users can see links. Click Here To Register...]

Salut,

Am facut toate setarile in toate fisierele asa cum m-ati indrumat.
Din pacate nu reusesc nicicum sa pornesc tot mecanismul asta mbox+newcs+phoenix, pur si simplu nu se deschide niciun canal codat.
Va rog, ca sa ma linistesc si eu, imi poate raspunde cineva la aceste 3 nelamuriri?
Folosesc MBOX control center. Tool-ul asta(care arata foarte bine, pacat ca nu are si un help) imi indica 3 posibile probleme, si anume:
-1. in tab-ul telnet la comanda mbox.sh40 dupa linia in care se comunica faptul ca s-a conecatat la device ([12:21:05] [newcamd] Connected to (127.0.0.1:10110) ...) lucrurile nu mai sunt ok. Mesajele sunt ([12:21:05] [newcamd] Failed to read network stream or read time-out or server gone offline (127.0.0.1:10110).) si ([12:21:05] [newcamd] Login request was rejected (127.0.0.1:10110).). Am cautat pe net dar numai o singura pagina imi gaseste pe google(numai ca e ceva adiacent despre o altfel de problema). Altceva ce nu inteleg este daca acest server de newcs trebuie pornit in mod explicit de undeva sau nu.
-2. daca dau restart MBOX de la butonul dreapta sus, dupa ce trece prin pasii(ii scrie in fereastra aplicatiei in bara de dialog din stanga jos) de connect ok, kill ok, la citirea mbox.cfg procesul crapa: mesajul de eroare este nespecific "An invalid argument was supplied" - pare ca e din .net framework - si aplicatia se inchide.
-3. in tabul newcs exista, sau asa pare, o metoda de conectare la serverul newcs. Orice configurare am facut pe IP, port, parola mesajul a fost invariabil acelasi: "Connection is forcefully rejected".

Rugamintea mea este sa imi confirmati sau nu daca aceste 3 chestii se intampla si la voi. Si daca stiti vreo solutie pentru ele.

Multumesc mult pentru orice sugestie,
rocco

---

Am aceeasi problema, cu diferenta ca se conecteaza la newcs. Adica in mbox center imi apare ca logat la server.
DAr tot nu decodeaza cartela max.
Cum pot sa atasez fisiere, as vrea sa-mi verificati si mie configurile?

Cu chiu cu vai am reusit sa fac newcs-ul sa mearga.
Acum in mbox center vad cartela max cu un peer, dar care este offline.
Si tot nu decodeaza.
La newcs nu am nici un ecm - imi apare zero. Nu stiu daca e corect!
Imi pare ca mbox nu se conecteaza la newcs, chiar daca am linia c in cwshare.
Ce sa fac?

merge la cineva conax cas7 cu phoenix ?

Fii mai explicut, daca te referi la F@cus merge sigur.

e hell@hd
merge cu mgcamd-newcs-usbrs232 ?
trebuie ceva configurat in plus ? ( img sifteam )
merci

Cardul cred ca e imperecheat cu receptorul si il pui degeaba. Din cate stiu eu nu intra in share hell@hd.

nu e imperechiat !

Hi,

stie cineva ce se antampla aici ? In Smartmose/Phoenix am o cartela conax Hell@HD, asta se intampla la schimbat canale, de ex Nat. Geo HD selectat genereaza ultimele randuri.
Craciun fericit tuturor !!


Welcome to the NewCS console
[ 22:04:49 ] [ Newcamd ] ECM local (NOT OK) 0B00 0000 001A "Focus Sat - Antena 3 Romania [C]"
[ 22:04:50 ] [ Newcamd ] ECM local (NOT OK) 0B00 0000 001A "Focus Sat - Antena 3 Romania [C]"
[ 22:04:53 ] [ Newcamd ] ECM local (NOT OK) 0B00 0000 001A "Focus Sat - Antena 3 Romania [C]"
[ 22:04:55 ] [ Newcamd ] ECM local (NOT OK) 0B00 0000 001A "Focus Sat - Antena 3 Romania [C]"
[ 22:04:56 ] [ Newcamd ] ECM local (NOT OK) 0B00 0000 001A "Focus Sat - Antena 3 Romania [C]"
[ 22:05:12 ] [ Newcamd ] ECM local (NOT OK) 0B00 0000 0002 "TVTEL - RTP 2 [C]"
[ 22:05:13 ] [ Newcamd ] ECM local (NOT OK) 0B00 0000 0002 "TVTEL - RTP 2 [C]"
[ 22:05:16 ] [ Newcamd ] ECM local (NOT OK) 0B00 0000 0002 "TVTEL - RTP 2 [C]"
[ 22:05:18 ] [ Newcamd ] ECM local (NOT OK) 0B00 0000 0002 "TVTEL - RTP 2 [C]"
[ 22:05:21 ] [ Newcamd ] ECM local (NOT OK) 0B00 0000 0002 "TVTEL - RTP 2 [C]"
[ 22:05:23 ] [ Newcamd ] ECM local (NOT OK) 0B00 0000 0002 "TVTEL - RTP 2 [C]"
[ 22:05:24 ] [ Newcamd ] ECM local (NOT OK) 0B00 0000 0002 "TVTEL - RTP 2 [C]"
[ 22:05:27 ] [ Newcamd ] ECM local (NOT OK) 0B00 0000 0002 "TVTEL - RTP 2 [C]"

Cum fac sa mearga CCcam 2011/NewCS162 cu -RS232 Card reader extern Pheonix,am tot cautat tutoriale dar..nimic!

la mine merge ok cu newcs