Ncam

Ncam 11.8 compiled and patched by marouan & RAED

-update URL (25.02.2021)”
-Fixed SoftCam.Key (url) cut file name”
-fixind srvid on Radegast Module by Adding srvid because ECM contains0000″
-webif-cacheex-client.reader-description-fix v1″
(add else conditions)”
-[biss] Changed tsid-onid combo validation”
-[gbx] – add dynamic card update/exchange”
* rearrange hello scheme
* add peer specific ccc reshare ident filter
* fix major bug in send hello msg
* correct checkcode calculation
* change some default settings
* add optional send msg Here? to selected peers”
-Fix need pin for 0961″
(reader) 0961_sky [videoguard2] classD3 ins54: no cw –> Card needs pin)”
-[dvbapi] Updated extension descriptor tags”
(In accordance with ETSI EN 300 468 V1.16.1, table 109.)”
-[powervu] Added some missing hash modes”
-[streamserver] Synced extension descriptor tags with the dvbapi code”

DEB & IPK
Download:
[Only registered and activated users can see links. Click Here To Register...]

Ncam 11.9 compiled and patched by marouan & RAED

-Fix compile error (undefined-reference-to-‘_binary_SoftCam_Key_start’)
-powervu sharing is blocked (Not Services)
(Add this reader into the ncam.services file)
*My Config files updated already (no need to add it again)
*After this fix should be Ncam read powervu and update keys direct from softcam,key no need to read it from (ncam.fs or CCcam.cfg). So more fast to update keys
…
[emulator]
caid = 0E00
provid =
srvid =
…
-dvbapi FBC Tuner fix (oscam@11691)
.ipk [Only registered and activated users can see links. Click Here To Register...]

........................................

NCam-5.3-r2 (Official)

Changelog v5.3-r2:
- Fixed warning messages with GCC 11.x.x
- Whitespaces cleaned.
- Fixed Newcamd/CCcam buffer overflow.
- Fixed Videoguard2.
- Fixed DVBAPI FBC Tuner.
- Fixed broken socket.
- Refactoring the code and more.

[Only registered and activated users can see links. Click Here To Register...]

enigma2-plugin-softcams-ncam_V11.9-r3_all.deb

[Only registered and activated users can see links. Click Here To Register...]

Ncam 12.0

-Update some Free servers url
-Camd35 src-data is frees
-fix webif aio proto
-[gbx] - enhance 'ignore peer' feature
-*thx to @[Only registered and activated users can see links. Click Here To Register...]e232 for providing the patch
*improve ccc reshare
*code cosmetic
-[nagra] Tivusat Silver Rainbow - Show Entitlements thx opti

ipk
[Only registered and activated users can see links. Click Here To Register...]
deb
[Only registered and activated users can see links. Click Here To Register...]

Ncam V12.1
-Remove libcurl4 from ncam

ipk
[Only registered and activated users can see links. Click Here To Register...]
deb
[Only registered and activated users can see links. Click Here To Register...]

Ncam V12.2
-Add libcurl4 to ncam compile
-Upgrade curl version to 7.79.1

ipk
[Only registered and activated users can see links. Click Here To Register...]
deb
[Only registered and activated users can see links. Click Here To Register...]

Ncam v.12.2
-Added bin files that were missing in ipk and deb file....

ipk
[Only registered and activated users can see links. Click Here To Register...]
deb
[Only registered and activated users can see links. Click Here To Register...]

Ncam v.12.2 r1
Solved and update files again ..

deb
[Only registered and activated users can see links. Click Here To Register...]

NCam_V12.2-r2
Solved and update deb files again ..

ipk
[Only registered and activated users can see links. Click Here To Register...]

Ncam.config Files

OE2.0
[Only registered and activated users can see links. Click Here To Register...]
OE2.5
[Only registered and activated users can see links. Click Here To Register...]

Ncam V12.3 r0

-CMake - Update minimum required version
(trac.streamboard.tv/oscam/changeset/11698)
-Fix some GCC 11 warnings
-(trac.streamboard.tv/oscam/changeset/11699)
-Fix some typos and cosmetics
-(trac.streamboard.tv/oscam/changeset/11700)

ipk
[Only registered and activated users can see links. Click Here To Register...]
deb
[Only registered and activated users can see links. Click Here To Register...]

---------- Post added at 22:12 ---------- Previous post was at 21:16 ----------

Linux-pc 32 bit
[Only registered and activated users can see links. Click Here To Register...]
Linux-pc 64 bit
[Only registered and activated users can see links. Click Here To Register...]

Ncam V12.4
-Fix read Biss keys from Softcam.key

ipk
[Only registered and activated users can see links. Click Here To Register...]
deb
[Only registered and activated users can see links. Click Here To Register...]
Linux-pc 32 bit
[Only registered and activated users can see links. Click Here To Register...]
Linux-pc 64 bit
[Only registered and activated users can see links. Click Here To Register...]

Ncam V12.4 r1
The ipk file has been updated and the TeamBlue image paths are modified
ipk
[Only registered and activated users can see links. Click Here To Register...]

Package: enigma2-plugin-softcams-ncam-reloaded V.2.0_rel. 115_220122
ARM architecture (Example: Vusolo4k)
openPLI enigma2 develop version , and similar
webIF port: 17001
Version: 2.0-r220122, build 115 of jan 22, 2022
Removed: "Reader services settings" section in the web interface
Depends: libc6 (>= 2.30), libcrypto1.1 (>= 1.1.1g), libssl1.1 (>= 1.1.1g), libusb-1.0-0 (>= 1.0.22)
IF you have a previous working version and you want to keep your settings:
1- Rename your existing binary app 'ncam-reloaded-2.0'
2- Take the new binary "ncam-reloaded-2.0" app from the .ipk and upload it to your box
Package name and Checksum:
9ba45ae9589c643fd4a462b74e48a903 enigma2-plugin-softcams-ncam-reloaded_2.0-r210122-build-115_armv7ahf-neon.ipk
thx to carloscarlosa
[Only registered and activated users can see links. Click Here To Register...]

NCam 5.5-r1
Changelog v5.5-r1:

- Increased the limit of allowed clients.
- Fixes and optimizations in doublecheck.
- Fixes for DGcrypt and add Caid 4AB0.
- Add force ipv4 (Only viewable using IPV6).
- Increased MAX_ECM_SIZE for SECA/NAGRA/NAGRA_MERLIN.
[Only registered and activated users can see links. Click Here To Register...]

NCam cardserver v5.6-r2

#########################################################################
OFFICIAL version
NCam cardserver v5.6-r2, ( MIPS, PPC, X86, X86_64, SH4, ARM, EXE )
Copyright (C) 2012 - 2022 developed by Javier Sayago (Javilonas).
Source Code: [Only registered and activated users can see links. Click Here To Register...]
Mirror Source Code: [Only registered and activated users can see links. Click Here To Register...]

Compiled:

ncam.mips Enigma2 - Mipsel (Gigablue, Dream, Vu+, Xtrend, Formuler...).
ncam.mips-openpli_40 Enigma2 - Mipsel (Openpli 4.0 'Gigablue, Dream, Vu+, Xtrend, Formuler'...).
ncam.mips-uclibc Enigma2/Others - Mipsel (Tiviar Plus 'firmware no enigma2', and similar).
ncam.x86 Linux PC (32 bit - i686).
ncam.x86_64 Linux PC (64 bit).
ncam.x86_64-syn_atom Linux x86_64 (For Synology ATOM 64 bit).
ncam.ppc Enigma1 - (Power PC - DM600, 7000, 7020, 7020si...).
ncam.ppc-old Enigma1 - (Power PC OLD - DM500, 500S, DBox2...).
ncam.sh4 Enigma2/Spark sh4 - (Golden Media, Galaxy Innovations, Amiko...).
ncam.cortexa9hf-vfp-neon Enigma2/Others - ARM (Cortex-A9 - Wetek, Vu+4K, Octagon 4k and similar).
ncam.vuplus4k_arm Enigma2 - ARM (Vu+ Zero|Uno|Duo|Solo|Ultimo 4K and similar).
ncam.james_donkey_arm Enigma2 - ARM (James Donkey DUO and similar).
ncam.arm-aarch64-dreambox Enigma2 - ARM (Dreambox ONE|TWO).
ncam.arm-dreambox Enigma2 - ARM (Dreambox DM9x0 UHD).
ncam.arm-raspbian ARM (Raspberry pi 3, Prismcube, TInkerboard and other similar).
ncam.arm-android ARM (For Android ARM (API 24+)).
ncam.arm-marvell ARM (Synology Armada 375 and similar).
ncam.arm-armada37xx ARM (Synology Synology Armada 37xx and aarch64 similar).
ncam.arm-mca ARM (For Matrix CAM Air).
ncam.arm-samsungtv ARM (For Samsung TV).
ncam-router.mips Mips (Routers MIPSEL DD-WRT).
ncam.router-openwrt-brcm47xx.mips Mips (Routers openwrt brcm47xx).
ncam.router-openwrt-ar71xx.mips Mips (Routers openwrt ar71xx).
ncam.router-openwrt-brcm63xx.mips Mips (Routers openwrt brcm63xx).
ncam.router-openwrt-huawei-hg556a.mips Mips (Routers openwrt Huawei HQ556a).
ncam-x86_64-pc.exe Windows PC (64-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).
ncam-i686-pc.exe Windows PC (32-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).

***********************************************************************************************

Ncam settings web:


Ncam Admin Control: [Only registered and activated users can see links. Click Here To Register...] (192.168.x.x or host-xx.org)
user: root
password: ldteam

Important: Change xxxxxxxxxx (0-9 and A-F) on the NodeID (Important to respect all 16 characters).

Change serverip (CCcam) 192.168.xx.xx to the ip of the receiver.

Change extended_cw_api in ncam.conf (Use 1 for ARM (OE2.2), use 2 MPISEL (OE2.0)).

Change in ncam.conf max_time, cw_cache_size and cw_cache_memory:

max_time = 18 // The time that the ECMs are going to be ?Keep in the cache?.
cw_cache_size = 8000 // CW cache count Max storage size (Affects the CPU (don't set a value too high)).
cw_cache_memory = 16 // MBs max. memory used for CW cache size (Affects the RAM, don't set a value too high).

Config: /var/tuxbox/config
SoftCam.Key: /var/tuxbox/config


SoftCam.Key Not included!!
The emulator is inactive by default.

***********************************************************************************************

Changelog v5.6-r2:
- Remove Gbox protocol.
- Support CCcam 2.3.8 and 2.3.9 (Server/Client).
- Fixes for Newcamd Stealth.
- Add select menu Stealth mode for readers (Default NCam).
- Fixes for Skip CWs cheksum for Nagra/Seca.
- Some changes in dvbapi_set_section_filter for dvn.
- Small change with ECM table for dvn (DVBAPI).
- Update init and do ECM for reader-jet.
- Update decrypt_cw_ex for StreamGuard.
- Fix small BUG for readers internal/external.
- Fixes for WEBIF selectd MGcamd reader (newcamd server emulate).
- Added new builds for: Huawei HQ556a, Dreambox DM9x0 UHD and ONE|TWO,
James Donkey DUO, Vu+ Zero|Uno|Duo|Solo|Ultimo 4K, Openpli 4.0 'Gigablue, Dream, Vu+, Xtrend, Formuler'.
- Minor fixes for lower CPU/RAM consumption.
- Internal adjustments for better Cache/CW CYCLE performance.
- Small fix for smoother zapping with NCam protocol.
- Updated sample and configuration files with a bit more detail.

--------------------------------------------------------------------
--------------------------------------------------------------------
-------------
Legal warning
-------------
NCam does not emulate by default any payment signal/platform without its corresponding suscription.
You, as an end user, will be responsible for the use that you will make and neither I (Javier Sayago)

[Only registered and activated users can see links. Click Here To Register...]

enigma2-plugin-softcams-ncam_V12.4-r3_all.ipk
fix installation on OpenaTV,Vix and OpenBH
[Only registered and activated users can see links. Click Here To Register...]

Ncam V12.5

-New option is useful for N lines (cccam_cfg_inactivity)
-Fix read Biss keys from Softcam.key
-Some update codes
-Update Free servers

ipk
[Only registered and activated users can see links. Click Here To Register...]
deb
[Only registered and activated users can see links. Click Here To Register...]
linux x64
[Only registered and activated users can see links. Click Here To Register...]

NCam 5.8-r0 (oficial)

Changelog v5.8-r0:
- Added option for demux control via webif.
- Built-in libcrypto libraries internally.
- Added the option to restart the actual card reader in case of detecting many errors.
- Fixed small BUG with IPV4/IPV6.
- Fix for warning: bad timing affecting full handling of ecms.
[Only registered and activated users can see links. Click Here To Register...]

NCam 6.0-r0 (oficial)

Changelog v6.0-r0:
- Fixed a small BUG with the timeout logic (ecmtimeoutlimit and ecmnotfoundlimit).
Changelog v5.9-r0:
- Fix DEMUX for all selected (-1 for default)
[Only registered and activated users can see links. Click Here To Register...]

---------- Post added at 01:57 ---------- Previous post was at 00:01 ----------

Ncam_V12.5-r1

Changelog
some fixes and OpenTR image support

ipk
[Only registered and activated users can see links. Click Here To Register...]