Oscam-SamyGO (Samsung SmartTV E/F/H/J/K)

Am reusit si eu sa instalez SamyGO si oscam pe ES7000 si merge ok... atunci cand merge.
De cele mai multe ori nu decodeaza nimic. In oscam apare eroarea:

12/02/2014 22:53:49 10BE58 c [DVBAPI] Demuxer #0 trying to descramble PID #4 CAID 0B02 PROVID 000000 ECMPID 005C ANY CHID PMTPID 0000 VPID 0202
12/02/2014 22:53:49 10BE58 c ERROR: Can't open device /tmp/virtual_adapter/demux0 (errno=2 No such file or directory)


12/02/2014 23:22:55 10BE58 c socket connect error (errno=2)
12/02/2014 23:22:56 10BE58 c [DVBAPI] PMT6: Trying connect to enigma CA PMT listen socket..


Dupa 1 sau 2 restarturi de TV merge ok.

Ce pot sa-i fac?

---------- Post added 13-02-14 at 00:14 ---------- Previous post was 12-02-14 at 22:54 ----------

Am reusit sa-l fac sa mearga dupa ce am dat logout la cont in SmartHUB.
Pe ES7000 apare imaginea dupa 51 sec de la pornirea TV-ului iar canalele le schimba in aprox 2 sec.

in log oscam ce curent time ai, an curent sau 1970?

ai dat?
chmod +x la /mtd_common?oscam/*
parese ca nu pleaca ntp-ul de ii da delay asa mare, ori ai modificat in run.sh in sleep=?

---------- Post added at 09:11 ---------- Previous post was at 08:39 ----------

drivers for pcsc readers (omnikey)
[Only registered and activated users can see links. Click Here To Register...]


dezarhivare, copiere, r/w in /mnt/opt/

Code:

---

cd /mnt/opt/privateer
chmod +x /mnt/opt/privateer/*

---

privateer:
./share
./sbin
./lib
./ifd-ccid.bundle
./bin

[Only registered and activated users can see links. Click Here To Register...]

Este ok acum, l-am facut sa mearga. Exista vreo posibilitate sa-l fac sa porneasca mai rapid ?
Nu aveam niciun sleep in run.sh

run.sh arata un pic diferit la mine decat in exemplul de mai sus, dar nu am vazut nicio comanda care i-ar da un delay.

Sa fie performantele sistemului de vina pentru timpul asa mare de pornire comparativ cu cele 16-18 secunde pe care le-ai obtinut tu ?
Al meu e UE40ES7000.

fa un bachup la run.sh-ul (PATH: /mtd_rwcommon/widgets/user/SamyGO/data) tau si rescrie-l cu cel de mai sus #1

in log oscam apare aceasta eroare:
The current system time is smaller than the build date (Nov 2 2013). Waiting up to 60 seconds for time to correct
Smart TV: [LOG003]1970/01/01 02:01:20 0 s Waiting was not successful. OSCam will be started but is UNSUPPORTED this way. Do not report any errors with this version.

verifica sa ai 755 la :
oscam
libOSCAM.so
samyGOso
samyGOrc
ntpclient
samyGOoscam

nu cred, @rromcic poate sa ne zica are serie E, eu il am in LAN no DHCP poate si asta conteaza insa mai putin de 16-18 sec nu cred ca vrea cu actualul SamyGO, (skype init)

ntp-ul ruleaza corect; logurile puse de mine aseara au data corecta: 2014/02/12
Toate fisierele au atribut executabil.

Nu risc nimic inlocuind run.sh curent cu cel de mai sus ?
Cel de mai sus nu este pentru seria F ?

Apropo, de ce este necesar sa se schimbe canalele la pornire ? UP, UP, DOWN, DOWN ?

Ca sa porneasca dupa 20 secunde imaginea, diseara postez toate fisierele mele de pe ES7000

Sent from my LT30p using Tapatalk

Quote:

---

Originally Posted by ibiza [Only registered and activated users can see links. Click Here To Register...]

Apropo, de ce este necesar sa se schimbe canalele la pornire ? UP, UP, DOWN, DOWN ?

---

sa ai imaginea UP daca nu descrambled is DOWN :)
initial scriptul era cu o singura schimbare, l-am modificat cu revenire pe cel "inchis"

@rromcic Poti sa postezi fisierele respective?

Thanks in avans

Din pacate nu reusesc sa atasez fisiere aici

Nu, dar poti sa le pui in [Only registered and activated users can see links. Click Here To Register...]

pacat ca cel care a reusit isprava asta nu este deloc interesat sa incerce ceva in directia televizoarelor Samsung cu procesor MST.
Cred ca posesorii de asemenea aparate sunt in majoritate, fiind mult mai accesibile.

oscam-1.20-unstable_svn9546-arm-v7a8v3r1 compiled by @sampao

[Only registered and activated users can see links. Click Here To Register...] (468.36 KB)
[Only registered and activated users can see links. Click Here To Register...] (714.29 KB)
[Only registered and activated users can see links. Click Here To Register...] (566 KB)
[Only registered and activated users can see links. Click Here To Register...] (485.25 KB)
[Only registered and activated users can see links. Click Here To Register...] (716 KB)

[UPDATE]
Extensii SamyGO in serie F

Download:
1. re-download and re-install whole SamyGO.zip [Only registered and activated users can see links. Click Here To Register...].
2. data file: [Only registered and activated users can see links. Click Here To Register...]
Installation
1. Install skype widget and start it once (check if it starts correctly)
2. Make sure Skype is set to autostart, before closing Skype again.
3. Download archive data and extract it "as is" to root of fat32 USB, attach to TV.
4. Install widget SamyGO ([Only registered and activated users can see links. Click Here To Register...])
Easiest way: [Only registered and activated users can see links. Click Here To Register...], [download: [Only registered and activated users can see links. Click Here To Register...]]you have to be sure that widget name is exact SamyGO.zip
5. Start SamyGO widget
6. Press Enter. If you get both Step1 and Step2 OK, then hack is installed.
7. Power off and power on TV

Features:

• ftp (port 21), true telnet (use putty) on 23 port, netcat shell (port 33)
• ssh (must be enabled first). login: root, password: SamyGO
• Simple web interface to start/stop scripts:

Code:

---

http://IP:1080/cgi-bin/test.cgi

---

• webshell on 1080 port:

Code:

---

http://IP:1080/phpsysinfo/shell.php

---

login: user
password: pass

• file manager:

Code:

---

http://IP:1080/phpsysinfo/file.php

---

• Mount of network resources to virtual usb (no physical USB is needed)
• samba shares mount. For example, if you shared on your windows pc directory, named movies and music.

Create file smb_userdata and fill it with next data:

Code:

---

USER="guest" #or your login name
        PASSWD="guest" #password
        SERVER="192.168.1.200" #IP of your samba server
        SHARES="movies music" #your network shares, divided with space

---

Place smb_userdata to /mtd_rwarea and restart tv.

• NFS shares
• remote ftp servers (curlftpfs)
• sshfs
• Transmission -torrent client on TV
  
  Code:

  ---

  [Only registered and activated users can see links. Click Here To Register...]
  Usage:
  After installation navigate to :
           

  
         

  Code:

  
         

  ---

  http://TV_IP:9091

  ---

  
  

          Default download directory is set to
           

  
         

  Code:

  
         

  ---

  /dtv/usb/sda1

  ---

  
  

          Means only woks with USB connected. If your USB mount path is other, go to Edit Preferences... (at the bottom of webgui) and change dir.
          Manual edit of config.json is possible, but you have to stop transmission-daemon process first. file to edit: $SYSROOT/usr/share/transmission/config.js
          up/down speed is set to limited 100Kb/s and can be changed/removed at any time over webgui.
  for configuration, use web interface or transgui.
  References on [Only registered and activated users can see links. Click Here To Register...] and forum.

  ---

• udpxy and xupnpd - tools for iptv
• exeTV patches (check F series Software forum...)
• oscam startup scripts
• other not mentioned, but included linux tools and services (nano, etc....)

Known issues:
autmatic search and mount shares is not working due weird behavior of smbclient (does anyone know how to fix that?).

logs: /mnt/samygo.log, sam.log

Important: if you want skip start of SamyGO Extensions, create empty file named STOP_SAMYGO on USB root directory and leave TV boot with that USB attached. Helps in some emergency situations to prevent boot-loop.

all patches made by bugficks are included, just enough to enable/disable corresponding scripts in /mnt/etc/init.d/:
[Only registered and activated users can see links. Click Here To Register...]

OSCAM

copiem folderul oscam[[Only registered and activated users can see links. Click Here To Register...]] in /mtd_rwcommon/
dam permisii 755 la tot folderul in telnet:

Code:

---

chmod +x /mtd_rwcommon/*

---

configuram oscam.conf, acces webif, alow...
[dvbapi]
enabled = 1
pmt_mode = 6
user = dvbapi #la alegere
boxtype = pc
dam enabled la scriptul de pornire oscam: 03_01_libOSCAM.init.dis din /mnt/etc/init.d/ prin eliminarea terminatiei .dis aftfel avem 03_01_libOSCAM.init, si modificam linia bin-ului oscam: OSCAM=oscam-r9003-samygo in OSCAM=oscam, chmod 777.
RESTART TV

Salut tuturor.

Sunt posesor al unui UE46F8500 si doresc sa va spun ca le-am incercat pe toate. In momentul de fata folosesc root normal cu versiunea oscam-1.20-unstable_svn9546-arm-v7a8v3r1-linux-gnueabi-samygo pe care il vad destul de stabil. Televizorul il folosesc ca, client (nu am la dispozitie un smargo).

Diferentele intre versiunile 9546 si 9003 sunt:
9546 mi se pare mai stabila cu toate ca timpul de deschidere dupa restart tV este de cca 22 de secunde fata de 18 in cazul 9003 cu run.sh setat pe sleep 0.

Deasemenea am incercat si root cu extensii care mi se pare destul de interesant, dar rezultatele nu mi s-au parut la inaltime.

Prima data am folosit fisierele puse de @qwess (oscam-1.20-unstable_svn9514-arm-v7a8v3r1-linux-gnueabi-libusb-static-samygo(update_for_extension), care mie nu mi-au functionat, probabil lipsa smargo. In schimb cu 9546 merge dar nu este stabil. Dupa restart ori deschidea in 18 sec. ori trebuiau chiar cateva minute bune. Pentru cele 18 sec. am introdus fisierul run.sh (versiune root normal), renumit in run1.sh. In tentativa mea am mai folosit fisierele: 01_01_libOSCAM.init si 99_99_libOSCAM.init (fisiere folosite in seriile ES) dar cu acelasi raspuns ...

---------- Post added at 18:09 ---------- Previous post was at 16:58 ----------

Quote:

---

Originally Posted by gauloises [Only registered and activated users can see links. Click Here To Register...]

Ai cumva undeva si lista cu tv-urile compatibile?zilele trecute am cam rasfoit forumurile si am aflat ca nu la toate tv-urile din seria e si f merge oscamul
Vreau sa imi iau unul de 32 inchi si nu stiu dupa care model sa ma uit

---

Salut

In pagina de suport Samsung gasesti toate firmware-urile folosite.

Pana atunci iti pot spune ca ROOT si Oscam functioneaza pe televizoarele:
Serie ES 7000, 8000, 9000 cu diagonale de la 40 inch in sus
Serie F 7000, 8000, 9000 cu diagonale de la 40 inch in sus

cu extensii nu am reusit sa scot un timp mai mic de 24-26 sec si am revenit la root normal cu un castig de 6 sec.

• cu initializare script samyGOoscam direct in run1.sh imediat dupa linia de initializare ftpd imagine in 24 sec. insa instabil dupe 60 sec: boot loop!
• cu initializare script samyGOoscam direct in run1.sh dupa lansarea extensiilor, imagine in 26-30 sec/instabil
• cu init.d in 01_01.script.init initializare script /mtd_rwcommon/oscam/samyGOoscam imagine la fel min.26-30 sec insa stabil.

pe root normal am modificat/creat script, pentru a sterge automat libOSCAM.so.disabled creat in urma unui eventual crash si lucreaza doar la initializarea SamyGO.

in /mtd_rwcommon/widgets/user/SamyGO/data/run.sh am inlaturat linkul catre samyGOoscam si am creat unul pentru un start al samyGOoscam

Code:

---

#!/bin/sh
cd /tmp
mkdir /tmp/bin
/mtd_exe/InfoLink/lib/unzip -o -P 12345 /mtd_rwcommon/widgets/user/SamyGO/data/data.zip -d /tmp/bin/
chmod 777 /tmp/bin/*
/tmp/bin/busybox --install -s /tmp/bin
sync
export PATH=/tmp/bin:$PATH
export LD_LIBRARY_PATH=/tmp/bin:$LD_LIBRARY_PATH
sync
/tmp/bin/busybox tcpsvd -vE 0.0.0.0 21 /tmp/bin/busybox ftpd -w / &
/tmp/bin/remshd &
sync
sh -x /mtd_rwcommon/oscam/samyGOstart.sh >> /mtd_rwcommon/oscam/samyGOstart.log  2>&1
sleep 5
/tmp/bin/UEP_killer.sh &
ps | grep run.sh | grep -v grep | while read child_pid others
do
    echo "Killing child process $child_pid of run.sh"
    kill -9 $child_pid
done

---

samyGOstart.sh

Code:

---

#!/bin/sh

rm /mtd_rwcommon/oscam/libOSCAM.so.disabled
/mtd_rwcommon/oscam/samyGOoscam

---

path: /mtd_rwcommon/oscam
permisiuni -x in telnet:

Code:

---

chmod 755 /mtd_rwcommon/oscam/samyGOstart.sh

---

log-ul creat (samyGOstart.log):

Code:

---

#crash detected
+ rm /mtd_rwcommon/oscam/libOSCAM.so.disabled
+ /mtd_rwcommon/oscam/samyGOoscam
Injecting /mtd_rwcommon/oscam/libOSCAM.so into pid 103
Starting oscam
#no crash detected
+ rm /mtd_rwcommon/oscam/libOSCAM.so.disabled
rm: can't remove '/mtd_rwcommon/oscam/libOSCAM.so.disabled': No such file or directory
+ /mtd_rwcommon/oscam/samyGOoscam
Injecting /mtd_rwcommon/oscam/libOSCAM.so into pid 99
Starting oscam
Checking pid 99 for crash.

---

samyGOoscam cu USB/ STOP_OSCAM file protection

Code:

---

#!/bin/sh

OSCAM=oscam
DIR_OSCAM=/mtd_rwcommon/oscam
BIN_OSCAM=${DIR_OSCAM}/${OSCAM}
LIB_OSCAM=${DIR_OSCAM}/libOSCAM.so
BIN_SAMYGOSO=${DIR_OSCAM}/samyGOso
BIN_NTPCLIENT=${DIR_OSCAM}/ntpclient
BIN_SAMYGORC=${DIR_OSCAM}/samyGOrc

PATH=$PATH:./

for USB in ${1:- /dtv/usb/sd* } ; do
    echo "checking $USB..."
    sleep 1
    if [ -e $USB/STOP_OSCAM ]; then
        echo "OSCAM STOP file found. Script exit!!"
        exit 1
    else
        echo "No OSCAM STOP file has been found. Continuing..."
    fi
done

if [ ! -f ${LIB_OSCAM} ]; then
    echo "${LIB_OSCAM} doesn't exist."
    exit 1
fi
if [ -e ${LIB_OSCAM}.disabled ]; then
    echo "***** Disabled due to previous crash."
    echo "***** Remove ${LIB_OSCAM}.disabled first and try again."
    exit 1
fi

export TZ="GMT-2"

chmod +x ${BIN_OSCAM} ${BIN_SAMYGOSO} ${BIN_NTPCLIENT} ${BIN_SAMYGORC} > /dev/null

if [ "$(pidof ntpclient)" == "" ]; then
    ${DIR_OSCAM}/ntpclient -s -h pool.ntp.org &> /dev/null
    ${DIR_OSCAM}/ntpclient -h pool.ntp.org &> /dev/null &
else
    echo ntpclient already running.
fi


INJPID=$(pidof exeTV || pidof exeDSP)
if [ "$INJPID" == "" ]; then
    echo "Process not found."
    exit 1
fi

X=$(grep -c OSCAM /proc/$INJPID/smaps) &> /dev/null

if [ $X -gt 0 ]; then
    echo libOSCAM already injected!
else   
    echo Injecting ${LIB_OSCAM} into pid $INJPID
    ${BIN_SAMYGOSO} -p $INJPID -l ${LIB_OSCAM} -r
fi

if [ "$(pidof ${OSCAM})" == "" ]; then
    echo Starting oscam
    ${BIN_OSCAM} -c ${DIR_OSCAM} -t ${DIR_OSCAM} &
        sleep 1
    ${BIN_SAMYGORC} -p $INJPID 18
        sleep 1  #daca nu se efectueaza dublu zapp = sleep 2
        ${BIN_SAMYGORC} -p $INJPID 16
else
    echo oscam already running.
fi

if [ $X -le 0 ]; then
    echo Checking pid $INJPID for crash.
    sleep 15
fi

if [ ! -e /proc/$INJPID ]; then
    echo "***** Process crash detected."
    echo "***** Disabling libOSCAM."
    touch ${LIB_OSCAM}.disabled
fi   

exit

---

La samygorc poți baga ambele comenzi in aceeași linie $injpid 18 16

Sent from my LT30p using Tapatalk

$injpid 18 16 la mine nu merge... ia decat o comanda de obicei prima, deja cu sleep 1 intre uneori sare.
la tine face dublu zapp?

Face și pe cablu și pe satelit

Sent from my LT30p using Tapatalk

Ai incercat sa-l "opresti" cu un echo "" sa nu intre in looping intre doua comenzi, fara a da sleep :D
$...; echo ""
$...

what is the best version oscam for samsung F 8000?