la mstar-urile de la samsung, dupa cite am inteles, nu au reusit sa "desfaca" dvbapi...asta-i cauza nefuncionalitatii...
daca-i dai de cap....pfffff... dau o bere!!! .. :drinks:
Printable View
la mstar-urile de la samsung, dupa cite am inteles, nu au reusit sa "desfaca" dvbapi...asta-i cauza nefuncionalitatii...
daca-i dai de cap....pfffff... dau o bere!!! .. :drinks:
In imaginile de mai jos sunt mai multe versiuni de Smart pe acelasi televizor:
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
Continuarea:
[Only registered and activated users can see links. Click Here To Register...]
Ieri am "pus in cap" la propriu un alt tv, care era agatzat pe smart.
Am facut update general cu un soft si difera panelul.
Am crezut ca restaurand filele de config (procedura e relativ simpla) il refac.
Nu e asa, exista driver de panel in fiecare model, separat de filele de cfg.
Acum negociez cu service-ul sa imi dea softul original, televizorul merge perfect, smartul la fel doar ca se vede cu capul in jos si e rezolutia un pic ciudata.
O sa studiez posibilitatea de a face update partial !
Inca nu am gasit o cale sa activez telnet pe ele.
Ar trebui adaugata o fila intr-un director si porneste singur la boot telnetul.
Nu ma las pana nu fac asta.
Nu a reusit inca nimeni la modelele astea sa faca asta.
---------- Post added at 13:53 ---------- Previous post was at 12:00 ----------
Atasamentele de mai sus sunt puse asa ca sa evit un bug de vbulletin.
Se pare ca nu ma lasa sa am mai mult de 3 imagini puse pe forum.
Am zis sa nu folosesc postimage .
A 4-a imagine nu vrea sa apara.
---------- Post added at 13:56 ---------- Previous post was at 13:53 ----------
[Only registered and activated users can see links. Click Here To Register...]
Asta ar trebui sa fie.
[Only registered and activated users can see links. Click Here To Register...]
---------- Post added at 15:30 ---------- Previous post was at 13:56 ----------
Televizoarele au U-boot ca la SH40.
Am reusit sa preiau controlul la U-boot, acum incerc sa bootez cu consola activa ca terminal.
---------- Post added at 15:41 ---------- Previous post was at 15:30 ----------
Intre timp am intrat in consola si am facut backup la tv. Prt asta e prea tarziu !
---------- Post added at 16:24 ---------- Previous post was at 15:41 ----------
Acum sap sa aflu parola de la telnet !
---------- Post added at 17:07 ---------- Previous post was at 16:24 ----------
Am root pe tv si telnet !
Code:(none) login: root
# ps
PID USER VSZ STAT COMMAND
1 root 2848 S init
2 root 0 SW< [kthreadd]
3 root 0 SW< [ksoftirqd/0]
4 root 0 SW< [events/0]
5 root 0 SW< [khelper]
8 root 0 SW< [async/mgr]
45 root 0 SW< [kblockd/0]
65 root 0 SW [pdflush]
66 root 0 SW [pdflush]
67 root 0 SW< [kswapd0]
183 root 0 SW< [mtdblockd]
184 root 0 SW< [nftld]
221 root 0 SW< [ubi_bgt0d]
225 root 0 SW< [ubi_bgt1d]
227 root 0 SW< [ubifs_bgt1_0]
228 root 2912 S /bin/sh /etc/init.d/rcS
232 root 0 SW< [ubifs_bgt0_0]
235 root 0 SW< [ubifs_bgt1_1]
240 root 2912 R /bin/telnetd -l /bin/login
241 root 803m S ./vendor/aurora.elf
333 root 0 SW< [khubd]
477 root 0 SWN [RtmpTimerTask]
478 root 0 SWN [RtmpMlmeTask]
479 root 0 SWN [RtmpCmdQTask]
480 root 0 SWN [RtmpWscTask]
548 root 20160 S N /vendor/linux-mipsel-skypekit-voicepcm-videortp -f /c
755 root 0 SW< [scsi_eh_3]
756 root 0 SW< [usb-storage]
772 root 0 SW [scsi-polling th]
782 root 2912 R -sh
783 root 3408 R ps
#
---------- Post added at 17:10 ---------- Previous post was at 17:07 ----------
Nu am citit nimic despre asta.
Am facut de oftica de azi de dim !
---------- Post added at 17:14 ---------- Previous post was at 17:10 ----------
Daaca apare alcatel pe aici vreau si eu parola echivalenta la :
Code:root:ypQ0ab9FhET1c:0:0:root:/root:/bin/sh
---------- Post added at 18:42 ---------- Previous post was at 17:14 ----------
la al 2-lea tv a durat 1 min sa ii pornesc telnet !!!!
Inca nu stiu daca e bine sa fac publica sau nu procedura !
Code:# uname -a
Linux (none) 2.6.28.10 #31 PREEMPT Wed Aug 14 18:55:38 CST 2013 mips GNU/Linux
Code:# cat /proc/cpuinfo
system type : MStar Chip
processor : 0
cpu model : MIPS 34Kc V5.5 FPU V0.0
BogoMIPS : 415.74
wait instruction : yes
microsecond timers : yes
tlb_entries : 64
extra interrupt vector : yes
hardware watchpoint : yes, count: 4, address/irw mask: [0x0ffc, 0x0484, 0x0400, 0x0ff8]
ASEs implemented : mips16 dsp mt
shadow register sets : 1
core : 0
VCED exceptions : not available
VCEI exceptions : not available
O sa iau de la service-ul autorizat firmware de reparatie oficial pe serie.
Deja am inceput tratativele.
La celelalte am asa ceva !
---------- Post added at 22:43 ---------- Previous post was at 22:35 ----------
Code:top - 20:42:44 up 4 min, 0 users, load average: 0.17, 0.19, 0.09
Tasks: 32 total, 2 running, 30 sleeping, 0 stopped, 0 zombie
Cpu(s): 3.3%us, 2.6%sy, 0.7%ni, 92.1%id, 0.0%wa, 0.7%hi, 0.7%si, 0.0%st
Mem: 277072k total, 123664k used, 153408k free, 176k buffers
Swap: 0k total, 0k used, 0k free, 61920k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
241 root 20 0 799m 59m 35m S 5.6 22.0 0:29.18 aurora.elf
240 root 20 0 2912 912 752 R 0.3 0.3 0:00.04 telnetd
616 root 20 0 3056 1616 1296 R 0.3 0.6 0:00.10 top
1 root 20 0 2848 960 816 S 0.0 0.3 0:00.16 init
2 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 kthreadd
3 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/0
4 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 events/0
5 root 15 -5 0 0 0 S 0.0 0.0 0:00.01 khelper
8 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 async/mgr
45 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/0
65 root 20 0 0 0 0 S 0.0 0.0 0:00.00 pdflush
66 root 20 0 0 0 0 S 0.0 0.0 0:00.01 pdflush
67 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 kswapd0
183 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 mtdblockd
184 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 nftld
221 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 ubi_bgt0d
225 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 ubi_bgt1d
227 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 ubifs_bgt1_0
228 root 20 0 2912 1168 976 S 0.0 0.4 0:00.04 rcS
232 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 ubifs_bgt0_0
235 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 ubifs_bgt1_1
340 root 15 -5 0 0 0 S 0.0 0.0 0:00.92 khubd
384 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_0
385 root 15 -5 0 0 0 S 0.0 0.0 0:00.01 usb-storage
401 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi-polling th
467 root 24 4 0 0 0 S 0.0 0.0 0:00.18 RtmpTimerTask
468 root 24 4 0 0 0 S 0.0 0.0 0:00.73 RtmpMlmeTask
469 root 24 4 0 0 0 S 0.0 0.0 0:00.00 RtmpCmdQTask
470 root 24 4 0 0 0 S 0.0 0.0 0:00.00 RtmpWscTask
554 root 24 4 20160 15m 0 S 0.0 5.7 0:02.90 linux-mipsel-sk
608 root 20 0 2912 1152 976 S 0.0 0.4 0:00.02 sh
614 root 20 0 2912 1152 976 S 0.0 0.4 0:00.02 sh
---------- Post added at 23:48 ---------- Previous post was at 22:43 ----------
Am uitat sa precizez ca sunt pe wireles conectat pe net!
Code:# ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:28105 errors:0 dropped:0 overruns:0 frame:0
TX packets:28105 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:6646500 (6.3 MiB) TX bytes:6646500 (6.3 MiB)
ra0 Link encap:Ethernet HWaddr 60:02:B4:5E:69:2D
inet addr:192.168.1.145 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1300 Metric:1
RX packets:110895 errors:0 dropped:0 overruns:0 frame:0
TX packets:7355 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:25660171 (24.4 MiB) TX bytes:2020910 (1.9 MiB)
#
Merg aplicatiile mipsel perfect !
Am pus alt busybox, pentru ca cel original avea putine comenzi.
Code:# ./busybox-mipsel
BusyBox v1.19.0 (2011-08-14 23:54:25 CDT) multi-call binary.
Copyright (C) 1998-2011 Erik Andersen, Rob Landley, Denys Vlasenko
and others. Licensed under GPLv2.
See source distribution for full notice.
Usage: busybox [function] [arguments]...
or: busybox --list[-full]
or: function [arguments]...
BusyBox is a multi-call binary that combines many common Unix
utilities into a single executable. Most people will create a
link to busybox for each function they wish to use and BusyBox
will act like whatever it was invoked as.
Currently defined functions:
[, [[, acpid, add-shell, addgroup, adduser, adjtimex, arp, arping, ash,
awk, base64, basename, beep, blkid, blockdev, bootchartd, brctl,
bunzip2, bzcat, bzip2, cal, cat, catv, chat, chattr, chgrp, chmod,
chown, chpasswd, chpst, chroot, chrt, chvt, cksum, clear, cmp, comm,
cp, cpio, crond, crontab, cryptpw, cttyhack, cut, date, dc, dd,
deallocvt, delgroup, deluser, depmod, devmem, df, dhcprelay, diff,
dirname, dmesg, dnsd, dnsdomainname, dos2unix, du, dumpkmap,
dumpleases, echo, ed, egrep, eject, env, envdir, envuidgid, ether-wake,
expand, expr, fakeidentd, false, fbset, fbsplash, fdflush, fdformat,
fdisk, fgconsole, fgrep, find, findfs, flock, fold, free, freeramdisk,
fsck, fsck.minix, fsync, ftpd, ftpget, ftpput, fuser, getopt, getty,
grep, groups, gunzip, gzip, halt, hd, hdparm, head, hexdump, hostid,
hostname, httpd, hush, hwclock, id, ifconfig, ifdown, ifenslave,
ifplugd, ifup, inetd, init, insmod, install, ionice, iostat, ip,
ipaddr, ipcalc, ipcrm, ipcs, iplink, iproute, iprule, iptunnel,
kbd_mode, kill, killall, killall5, klogd, last, less, linux32, linux64,
linuxrc, ln, loadfont, loadkmap, logger, login, logname, logread,
losetup, lpd, lpq, lpr, ls, lsattr, lsmod, lspci, lsusb, lzcat, lzma,
lzop, lzopcat, makedevs, makemime, man, md5sum, mdev, mesg, microcom,
mkdir, mkdosfs, mke2fs, mkfifo, mkfs.ext2, mkfs.minix, mkfs.vfat,
mknod, mkpasswd, mkswap, mktemp, modinfo, modprobe, more, mount,
mountpoint, mpstat, mt, mv, nameif, nbd-client, nc, netstat, nice,
nmeter, nohup, nslookup, ntpd, od, openvt, passwd, patch, pgrep, pidof,
ping, ping6, pipe_progress, pivot_root, pkill, pmap, popmaildir,
poweroff, powertop, printenv, printf, ps, pscan, pstree, pwd, pwdx,
raidautorun, rdate, rdev, readahead, readlink, readprofile, realpath,
reboot, reformime, remove-shell, renice, reset, resize, rev, rm, rmdir,
rmmod, route, rpm, rpm2cpio, rtcwake, run-parts, runlevel, runsv,
runsvdir, rx, script, scriptreplay, sed, sendmail, seq, setarch,
setconsole, setfont, setkeycodes, setlogcons, setserial, setsid,
setuidgid, sh, sha1sum, sha256sum, sha512sum, showkey, slattach, sleep,
smemcap, softlimit, sort, split, start-stop-daemon, stat, strings,
stty, su, sulogin, sum, sv, svlogd, swapoff, swapon, switch_root, sync,
sysctl, syslogd, tac, tail, tar, tcpsvd, tee, telnet, telnetd, test,
tftp, tftpd, time, timeout, top, touch, tr, traceroute, traceroute6,
true, tty, ttysize, tunctl, ubiattach, ubidetach, ubimkvol, ubirmvol,
ubirsvol, ubiupdatevol, udhcpc, udhcpd, udpsvd, umount, uname,
unexpand, uniq, unix2dos, unlzma, unlzop, unxz, unzip, uptime, users,
usleep, uudecode, uuencode, vconfig, vi, vlock, volname, wall, watch,
watchdog, wc, wget, which, who, whoami, whois, xargs, xz, xzcat, yes,
zcat, zcip
---------- Post added at 14:39 ---------- Previous post was at 13:17 ----------
Code:# ./oscam
12:38:34 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r10458 (mipsel-unknown-linux-gnu)
12:38:34 0 s (main) System name = Linux
12:38:34 0 s (main) Host name = (none)
12:38:34 0 s (main) Release = 2.6.28.10
12:38:34 0 s (main) Version = #31 PREEMPT Wed Aug 14 18:55:38 CST 2013
12:38:34 0 s (main) Machine = mips
12:38:34 0 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 923
12:38:34 0 s (main) signal handling initialized
12:38:34 54B890 h (webif) webif: decompressed 152402 bytes back into 366512 bytes
12:38:34 54B890 h (webif) HTTP Server running. ip=0.0.0.0 port=8888
12:38:34 0 s (stat) loadbalancer: can't read from file /tmp/.oscam/stat
12:38:34 0 s (main) waiting for local card init
12:38:34 0 s (main) init for all local cards done
12:38:34 0 s (emmcache) can't read emmcache from file /tmp/.oscam/oscam.emmcache
12:38:34 0 s (emmcache) can't read emmstats from file /tmp/.oscam/oscam.emmstat
12:38:34 0 s (anticasc) anti cascading disabled
12:38:34 54EEC0 c (client) plain dvbapi-client granted (anonymous, au=off)
12:38:34 54EEC0 c (dvbapi) dvbapi channelcache can't read from file /var/tuxbox/config/oscam.ccache
12:38:34 54EEC0 c (dvbapi) ERROR: Could not detect DVBAPI version.
---------- Post added at 14:42 ---------- Previous post was at 14:39 ----------
Poti sa pui server de oscam si cccam pe tv. Ramane sa se gaseasca o cale de DVB-API !
---------- Post added at 15:11 ---------- Previous post was at 14:42 ----------
Am desasamblat executabilul !
Aurora se numeste softul .
acolo-i buba... :D ...cum spuneam: dau o bere!!!.. :drinks:Quote:
Ramane sa se gaseasca o cale de DVB-API
Am descoperit cateva functii noi, metode de a face autobackup.
O sa dureze sa inteleg din IDAPro.
Am gasit si procedurile de CI, le zice ICE.
Se vad intre ele televizoarele !
Poti sa te uiti pe inregistrari intre ele.
Am pornit si WIFI-Direct.
Are suport si pt USB-Network.
Azi am intrat intr-un vestel care are procesor Broadcom dual core:
Code:# cat /proc/cpuinfo
system type : BCM97xxx Settop Platform
build target : 3548b0-smp-nand
processor : 0
cpu model : BMIPS4380 V4.4 FPU V0.1
cpu MHz : 402.43
BogoMIPS : 402.43 ( udelay_val : 201216 HZ = 1000 )
wait instruction : yes
microsecond timers : yes
tlb_entries : 32
extra interrupt vector : yes
hardware watchpoint : no
ASEs implemented : mips16
VCED exceptions : not available
VCEI exceptions : not available
RAC setting : Unknown
unaligned access : 7
rdhwr/brdhwr traps : 0 / 0
process migrations : 1414
processor : 1
cpu model : BMIPS4380 V4.4 FPU V0.1
cpu MHz : 404.48
BogoMIPS : 404.48 ( udelay_val : 202240 HZ = 1000 )
wait instruction : yes
microsecond timers : yes
tlb_entries : 32
extra interrupt vector : yes
hardware watchpoint : no
ASEs implemented : mips16
VCED exceptions : not available
VCEI exceptions : not available
RAC setting : Unknown
#
Asteptam mai multe stiri...cam ce se poate modifica, daca tot ai intrat in el , ceva noutati...
Un manual de service pentru 17MB35 gasim? Nu am nicio optiune "editabila" la panel.
In afara de resetarea "on time si st by time" nu are nimic important.
Finlux(vestel)
[Only registered and activated users can see links. Click Here To Register...][Only registered and activated users can see links. Click Here To Register...][Only registered and activated users can see links. Click Here To Register...]
Se modifica din optiunea 7 da nu e public nimic.
Nu te sfatuiesc sa umblii.
Optiunea 7 + CEC :
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
Pentru cei care nu stiau ce inseamna VESTEL:
[Only registered and activated users can see links. Click Here To Register...]
si in domeniul militar:
[Only registered and activated users can see links. Click Here To Register...]