cnx-software News

Printable View

Show 20 post(s) from this thread on one page

15-07-25, 18:14
CNX

AMobile SoM-SD520/SoM-SD720 SoM targets Edge and Generative AI with Me

Taiwanese company AMobile Solutions has launched the SoM-SD520 and SoM-SD720 system-on-modules, powered by MediaTek Genio...

[Only registered and activated users can see links. Click Here To Register...]
15-07-25, 18:14
CNX

DFRobot FireBeetle 2 ESP32-P4 is a compact board with MIPI DSI/DSI, mi

DFRobot FireBeetle 2 ESP32-P4 development board features an ESP32-C6 wireless module, two USB-C ports, GPIO...

[Only registered and activated users can see links. Click Here To Register...]
15-07-25, 18:14
CNX

Wio-LR1121 tiny LoRa module supports for sub-GHz, S-Band, and 2.4GHz f

Seeed Studio Wio-LR1121 is a tiny, multi-band LoRa module based on LR1121 RF transceiver, a...

[Only registered and activated users can see links. Click Here To Register...]
15-07-25, 18:14
CNX

Radxa E24C and E54C Rockchip RK3528A/RK3582 network computers features

Radxa E24C and E54C are mini routers and embedded boxes based on, respectively, Rockchip RK3528A...

[Only registered and activated users can see links. Click Here To Register...]
15-07-25, 18:14
CNX

Industrial IoT board based on NuMicro M467 Ethernet MCU follows Arduin

The NuMaker-UNO-M4 is an industrial-grade IoT development board powered by a Nuvoton NuMicro M467 series...

[Only registered and activated users can see links. Click Here To Register...]
15-07-25, 18:14
CNX

Waveshare SATA HAT+ adds two SATA 3.0 ports to Raspberry Pi 5

Waveshare PCIe TO 2-CH SATA HAT+ is a dual-channel PCIe FFC to SATA 3.0 HAT+...

[Only registered and activated users can see links. Click Here To Register...]
15-07-25, 18:14
CNX

Maduino Zero Wi-Fi HaLow – An 802.11ah board programmable with the Ard

Makerfabs Maduino Zero Wi-Fi HaLow is an Arduino Zero-compatible Wi-Fi HaLow (802.11ah) development board designed...

[Only registered and activated users can see links. Click Here To Register...]
15-07-25, 18:14
CNX

Renesas RA2T1 low-power Cortex-M23 MCUs target BLDC/PMSM motor applica

Renesas has recently launched the RA2T1 group of low-power motor control MCUs, built around a...

[Only registered and activated users can see links. Click Here To Register...]
15-07-25, 18:14
CNX

Review of GL.iNet Comet (GL-RM1) KVM-over-IP solution and ATX power co

GL.iNet sent me a Comet (GL-RM1) remote KVM box for review, along with a GL-ATXPC...

[Only registered and activated users can see links. Click Here To Register...]
18-07-25, 18:48
CNX

cExpress-R8 COM Express Type 6 Compact module features up to Ryzen Emb

ADLINK cExpress-R8 is a COM Express Type 6 Compact CPU module powered by a choice...

[Only registered and activated users can see links. Click Here To Register...]
18-07-25, 18:48
CNX

$14 development board features GUITION ESP32-P4 + ESP32-C6 module

While searching Aliexpress for new products, I found out about the JC-ESP32P4-M3-DEV from the Maker...

[Only registered and activated users can see links. Click Here To Register...]
18-07-25, 18:48
CNX

Rockchip unveils RK3668 10-core Arm Cortex-A730/Cortex-A530 SoC with 1

The Rockchip Developer Conference 2025 (RKDC!2025) is now taking place in Fuzhou, China, with some...

[Only registered and activated users can see links. Click Here To Register...]
18-07-25, 18:48
CNX

P250Q-M80 M.2 NVMe SSD supports one-click data destruction by software

Team Group P250Q-M80 is a PCIe Gen4 x4 M.2 SSD with up to 2TB capacity...

[Only registered and activated users can see links. Click Here To Register...]
18-07-25, 18:48
CNX

Quectel KCMA32S – A Zigbee 3.0 and BLE 5.3 module based on Silicon Lab

Quectel is better known for its GNSS, 4G LTE, and 5G cellular IoT modules, but...

[Only registered and activated users can see links. Click Here To Register...]
18-07-25, 18:48
CNX

CamThink NeoEyes NE101 – A low-power, modular ESP32-S3 Vision AI Camer

CamThink NeoEyes NE101 is a battery-powered, low-power Vision AI Camera powered by an ESP32-S3 wireless...

[Only registered and activated users can see links. Click Here To Register...]

Show 20 post(s) from this thread on one page

All times are GMT +3. The time now is 00:46.