cnx-software News

Printable View

Show 20 post(s) from this thread on one page

21-06-25, 14:47
CNX

CyberT. – A BlackBerry-like Raspberry Pi CM4-based handheld Linux comp

Designed by Carbon Computers, the CyberT. is a BlackBerry-style handheld Linux computer equipped with a...

[Only registered and activated users can see links. Click Here To Register...]
21-06-25, 14:47
CNX

SONOFF iPlug S60 Zigbee Smart Plug (S60ZBTPF) review with eWelink and

At the end of 2023, CNX Software covered the SONOFF iPlug S60 Wi-Fi Smart Plug,...

[Only registered and activated users can see links. Click Here To Register...]
24-06-25, 14:52
CNX

Red Pitaya STEMlab 125-14 PRO Gen 2 is an AMD Zynq 7010/7020-based boa

The Red Pitaya board was first introduced in 2013 as an Xilinx Zynq 7010 SoC...

[Only registered and activated users can see links. Click Here To Register...]
24-06-25, 14:52
CNX

AAEON UP TWL and UP TWLS – Two credit card-sized, wide temperature Twi

AAEON UP TWL and UP TWLS are two new credit card-sized single board computers (SBCs)...

[Only registered and activated users can see links. Click Here To Register...]
24-06-25, 14:52
CNX

ST’s Human Presence Detection (HPD) solution tracks head and posture w

Back in 2022, we first saw STMicro launch the VL53L5CP ToF presence detection sensor for...

[Only registered and activated users can see links. Click Here To Register...]
24-06-25, 14:52
CNX

GEEKOM Mini IT12 2025 Edition Review – Part 1: Intel Core i7-1280P min

GEEKOM Mini IT12 2025 Edition is a mini PC with three 12th Gen Intel Alder...

[Only registered and activated users can see links. Click Here To Register...]
24-06-25, 14:52
CNX

Airgain introduces plug-and-play NimbeLink Skywire Cat 1bis embedded m

Airgain has recently launched the pre-certified NimbeLink Skywire Cat 1bis Embedded Modem, which it claims...

[Only registered and activated users can see links. Click Here To Register...]
24-06-25, 14:52
CNX

$2 development board features Puya PY32F030 Cortex-M0+ MCU with 64KB F

The Puya PY32F030 core board is a low-cost industrial development board based on the 48...

[Only registered and activated users can see links. Click Here To Register...]
27-06-25, 15:23
CNX

reComputer Mini is a compact carrier board for the NVIDIA Jetson Orin

Seeed Studio’s reComputer Mini is a small carrier board for the NVIDIA Jetson Orin Nano...

[Only registered and activated users can see links. Click Here To Register...]
27-06-25, 15:23
CNX

Improved HackRF Pro open-source SDR platform supports 100 kHz to 6 GHz

HackRF Pro is an update to the HackRF (One) open-source SDR platform first launched by...

[Only registered and activated users can see links. Click Here To Register...]
27-06-25, 15:23
CNX

Yxk S15 UItra – A thin fanless mini PC with Intel N100, 16GB RAM, 512G

The Yxk S15 Ultra is a low-cost, fanless Intel N100 mini PC with an ultra-thin...

[Only registered and activated users can see links. Click Here To Register...]
27-06-25, 15:23
CNX

Topton N18 NAS mini-ITX motherboard ships with Intel N150 or Core i3-N

Topton N18 is a mini-ITX motherboard powered by either an Intel Processor N150 Twin Lake...

[Only registered and activated users can see links. Click Here To Register...]
27-06-25, 15:23
CNX

RAKwireless Raspberry Pi CM4-based industrial gateway supports both MI

The WisGate Connect for MIOTY is an industrial-grade hybrid IoT gateway with support for both MIOTY...

[Only registered and activated users can see links. Click Here To Register...]
27-06-25, 15:23
CNX

Fairphone (Gen. 6) is a sustainable, repairable 6.31-inch Android 15 s

The Fairphone (Gen. 6) is a 6.31-inch Android 15 smartphone powered by a Qualcomm Snapdragon...

[Only registered and activated users can see links. Click Here To Register...]
27-06-25, 15:23
CNX

82 x 50mm SoM combines NXP i.MX 8M Mini SoC with 25 TOPS DEEPX DX-M1 A

Virtium Embedded Artists has just announced the launch of the iMX8M Mini DX-M1 system-on-module (SoM)...

[Only registered and activated users can see links. Click Here To Register...]

Show 20 post(s) from this thread on one page

All times are GMT +3. The time now is 23:25.