cnx-software News

Printable View

Show 20 post(s) from this thread on one page

16-12-25, 12:37
CNX

STEVAL-ROBKIT1 – A robot evaluation kit based on STM32H725 and STM32G0

The STEVAL-ROBKIT1 is an evaluation kit for robotics applications based on ST’s STM32H725 and STM32G0...

[Only registered and activated users can see links. Click Here To Register...]
19-12-25, 12:41
CNX

Raspberry Pi RP2350 devkit features 1.85-inch round touch display, mic

Waveshare RP2350-Touch-LCD-1.85C is a Raspberry Pi RP2350 devkit with a 1.85-inch round touchscreen display with...

[Only registered and activated users can see links. Click Here To Register...]
19-12-25, 12:41
CNX

LILYGO T-Echo Plus off-grid LoRa communicator features a climbing hook

The LILYGO T-Echo Plus is another off-grid LoRa communicator, similar to Blackout Comms, ThinkNode M2,...

[Only registered and activated users can see links. Click Here To Register...]
19-12-25, 12:41
CNX

REETLE SmartInk I – An AI-powered E-Ink phone case with voice recordin

The REETLE SmartInk I is a phone case with a touch-enabled E-Ink display and built-in...

[Only registered and activated users can see links. Click Here To Register...]
19-12-25, 12:41
CNX

NASP NeuroVoice VAD chip enables always-on voice activity detection at

POLYN Technology’s Neuromorphic Analog Signal Processor (NASP) NeuroVoice VAD is an always-on, ultra-low-power chip that...

[Only registered and activated users can see links. Click Here To Register...]
19-12-25, 12:41
CNX

Radxa Dragon Q6A Arm SBC gets official Windows 11 preview

While most people use Linux on Arm SBCs, it’s typically possible to run Windows 11...

[Only registered and activated users can see links. Click Here To Register...]
19-12-25, 12:41
CNX

Toradex Luna SL1680 – A “Pro Consumer” Raspberry Pi lookalike based on

Toradex Luna SL1680 is a credit card-sized single board computer heavily inspired by the Raspberry...

[Only registered and activated users can see links. Click Here To Register...]
19-12-25, 12:41
CNX

Fusion HAT+ Raspberry Pi expansion board targets motor and servo contr

SunFounder Fusion HAT+ for Raspberry Pi 5/4/3B+ and Zero single board computers is a motor...

[Only registered and activated users can see links. Click Here To Register...]
19-12-25, 12:41
CNX

Compact development board features a single ESP32-P4 + ESP32-C5 dual-b

Just a few months back, Wireless-Tag released the WT99P4C5-S1, which combines the ESP32-P4 with an...

[Only registered and activated users can see links. Click Here To Register...]
19-12-25, 12:41
CNX

Maxell PSB2032 35 mAh all-solid-state coin cell battery targets indust

Maxell PSB2032 is a rechargeable “all-solid-state” coin cell battery for industrial IoT devices, which more...

[Only registered and activated users can see links. Click Here To Register...]
19-12-25, 12:41
CNX

MicroPython v1.27 adds support for ESP32-C5, ESP32-P4, and STM32U5 mic

MicroPython is one of the most popular firmware for microcontrollers due to its ease of...

[Only registered and activated users can see links. Click Here To Register...]
19-12-25, 12:41
CNX

HealthyPi 6 – A portable Wi-Fi 6 biosignal acquisition device with ECG

Designed by ProtoCentral Electronics in India, the HealthyPi 6 is an open-source, portable, research-grade biosignal...

[Only registered and activated users can see links. Click Here To Register...]
22-12-25, 12:43
CNX

ESP32-S3 AIoT Basic – A learning and prototyping kit with camera, audi

The ESP32-S3 AIoT Basic is a low-cost, learning, and prototyping kit for the ESP32-S3. The...

[Only registered and activated users can see links. Click Here To Register...]
22-12-25, 12:43
CNX

Forlinx FCU3011 – An NVIDIA Jetson Orin Nano fanless industrial comput

Forlinx Embedded has recently released the FCU3011, a compact, fanless industrial AI edge computer built...

[Only registered and activated users can see links. Click Here To Register...]
22-12-25, 12:43
CNX

XIAO Soil Moisture Sensor review with Home Assistant

Seeed Studio sent us a review sample of the XIAO Soil Moisture Sensor powered by...

[Only registered and activated users can see links. Click Here To Register...]
22-12-25, 12:43
CNX

Do you need 14 USB ports on your Raspberry Pi 5?

If you do, then you’re in luck, thanks to the Suptronics X1013 expansion board for...

[Only registered and activated users can see links. Click Here To Register...]
22-12-25, 12:43
CNX

Fanless Box PC features Intel Core Ultra 5/7/9 “Arrow Lake” CPU with u

AAEON BOXER-6648-ARS is a powerful, yet fanless embedded Box PC equipped with the latest generation...

[Only registered and activated users can see links. Click Here To Register...]
22-12-25, 12:43
CNX

ESP32-P4 learning and prototyping kit features 7-inch touchscreen, com

Elecrow’s “All-in-One Starter Kit for ESP32-P4” is an open-source learning and prototyping platform based on...

[Only registered and activated users can see links. Click Here To Register...]
25-12-25, 12:58
CNX

Firefly CAM-3576 series – Tiny Rockchip RK3576 SBCs for commercial, in

Firefly Technology has introduced the CAM-3576 series of tiny (38 × 38 mm) SBCs based...

[Only registered and activated users can see links. Click Here To Register...]
25-12-25, 12:58
CNX

CrowPi 3 AI Learning Kit is powered by a Raspberry Pi 5 SBC, works wit

Elecrow CrowPi 3 is the latest CrowPi learning and development kit featuring 41 built-in modules...

[Only registered and activated users can see links. Click Here To Register...]

Show 20 post(s) from this thread on one page

All times are GMT +3. The time now is 19:04.