Noutatii pt Firmware si pt EMU!

[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]

[Only registered and activated users can see links. Click Here To Register...]

[Only registered and activated users can see links. Click Here To Register...]

Asta skin poate sa il foloseste oricine are PKT 5.0...Trebuie sa face update la panel PKT prin menu si dupa update o sa are pe versiuna PKT 5.1 care o sa contine si asta skin.Important este ca stie pe sistem de codare fiecarui canal si il afiseze

dupa ce am instalat acest skin, au disparut toti peeri din mbox, am pus innapoi hd-dream ul si e din nou ok. poate informatia ajuta la altii.

:gathering: e ca si cum ai zice ca dupa ce ai schimbat tema din windows ti-au disparut toti din lista de la Y! :lol:

au disparut = offline, eu eram vazut de ei ca fiind fara local, incearca.:oops:
( am mai instalat in paralel samba server, dar asta nu cred ca poate sa aiba de aface cu acest caz, de altfel sant o gramada de buguri care au de aface cu skin pe care-l folosesti, de ex afisare subtitraj txt in hd-dream )

IncubusCamd 0.89

release V0.89

WARNING: config file is changed a bit, now is less difficult for stupid people to configure it (i hope) and many features
are added but not completed yet

- added camd33 protocol
- added camd35 protocol
- added possibility to define .prio and SoftCam.Key file directories
- added a check on multi istances of running incubusCamd to prevent errors (i read that many people start many times
the cam and this will crash connections to servers)
- fixed cccam 2.1.2 support for check on protocol version
- now you can set priority for each provider/caid combination, by selecting if you prefer the cam will check firstly
internal emulator, card share protocol or internal card reader (not yet implemented the card reader function, it-s a future plan)
check the "check_priority" option in the config file
- now you can set card share protocol priority, check the "cs_protocol_order" option in the config file
- changed a bit the configuration file to allow you to set all protocols data inside the [Servers] section, check the config file to know more

IncubusCamd 0.89

Scuze, am uitat sa pun linkul:

[Only registered and activated users can see links. Click Here To Register...]

This README is for CubeRevo HD model series.
This document was approved on 08/Aug/2009 by the DGSTATION.

DGS release r10336: ( 08/Aug/2009)
--------------------------------------------------------------
1. Add iCubeRevo function
: If you have the iPhone(or iPod), you can operate the STB via iPhone(or iPod).
More description is attached. The file name is "iCubeRevo_manual.pdf".
2. Add streaming player function
: Bi-directional stream transmission between STB and PC is possible.
Several protocols(UDP, RTP) are supported. And Multicast or unicast are supported.
More description is attached. The file name is "MultiRoom and Streaming manual.pdf".
3. Add multiroom service function
: Several STBs can access the Server STB and see the Server's file, mp3, video player and channels.
More description is attached. The file name is "MultiRoom and Streaming manual.pdf".
4. Add M3U Player function
: M3U is a format that stores multimedia playlists.
Our M3U player can play XVID(Without GMC and Qpel), MPEG1, MPEG2, H.264.
5. Improv Nordic subtitle (Canal Film HD, Silver HD, BBC HD and so on)
: For the meantime, we didn't display subtitle without PTS or with wrong PTS.
But, at present, we support these subtitle.
6. Improve the channel navigation
: You can see the faster movement at the channel, Fav, epg list and so on.
7. Fixed incorrect aspect ratio for 4:3 channels
: For the meantime, our STB displayed PillarBox, Zoom with a little distortion.
8. Fixed subtitle overlaping on Hotbird.
: Hotbird 13E 11766 V 27500 (channel name : Rai1, Rai2, Rai3)
9. Fixed ttxt subtitle page at the specific pages(775~777)
: Hotbird 13E 11919 V 27500 (channel name : Italia 1, Canale 5, Retequattro)
10. Update russian language file by uncle fedor.
11. Update german language file by Nils.

Note.
1. When multiroom service and streaming player is running, recording and pip doesn't support.
2. Our Video player is related with CODEC, FPS(frame per second) and resolution.
As you know, even if the Filename Extension is different each other,
if the video codec is same each other, the two files work like same.
If the video file's resolution is more than 720 X 576, it will works very well.
So, we recommend below conditions.
1) resolution : 720 X 576.
2) FPS : 24, 25 and 30 fps.
3) Following video and audio codec.
Video Codec : XVID(Without GMC and Qpel), OpenDivx(less than Divx5.2), MPEG1, MPEG2, H.264
Audio Codec : MP2, MP3, AC3
When file's codec is Xvid, If you remove the GMC and Qpel, it works well.
If the file's video codec is MPEG series, it doesn't support the adjusting sync function on video player.

3. ext3 file system is slower than ext2 normally.
If you record two HD channels with ext3 at the same time, it may fail in record.

we have checked the speed as below
ext2 speed : approximately 7MB/s
ext3 speed : approximately 3MB/s

Known issues(on going).
1. Artefact with Premiere HD channels from satellite or cable.
2. The timeshift function of multiroom will release on the next.

Caution.
1. we strongly recommend to format your USB memory stick before the new image copy in it, otherwise, it may happen "ER10".
2. you should download usb_all_noboot.img into STB for improving Web interface and plugins, otherwise, the function

Pina la sfarsit de saptamina o sa apare si versiuna NLB pt r10336!Pt sifteam nu prea cunosc pt ca tot staff lui sifteam este in vacanta.In plus cu ultimul firmware de la DGS ipbox are si pe functia multiroom (mai jos dau pe manual ca sa stiti cum se seteze)In plus poate sa fie controlat si prin Iphone (dau pe manual mai jos)


MultiRoom and Streaming manual
[Only registered and activated users can see links. Click Here To Register...]

iCubeRevo manual
[Only registered and activated users can see links. Click Here To Register...]

release 0.5.5
*********************
Ok from this release you will get a nightly build image. (this means i will not support stupid options like: panels, plugins and so on)
Soon a sifteam image will be out with panel and many options enabled.
I choose this way because i want that cuberevo community increase more! Many teams are involved in E2 now, so
each one can do his choice, and sifteam images will be out with another image (obviously based on the same Nightly build image version)
I will publish also how to build your own flash image, so every team can do it.

- new bootlogo (thanks arken)
- added bulgarian language
- added autofs
- added openvpn
- added openssl library
- added 576i to AutoResolution plugin
- added ftpput
- added ftpget
- added netstat
- "fixed" signal level on tuners
- teletext exit with "exit" button on remote
- fixed aspect on screen when exiting from teletext. If watching 16:9 format, it is shrinked, so looks like 16:6 or something
- fixed positioner setup
- fixed teletext subtitles
- remapped few buttons
- fix for DVB subtitles wich were not shown on some skins
- fixed bootlogo view on SD television
- fix the issue with stopping playback while it is paused
- incorporated the new web interface version (04/06/2009)
- fixed fast forward for MP3 in MediaPlayer
- enabled forwarding the second transport stream to the decoder
- fix avi 23.976fps/24.976fps/29.976fps
- avi: fix audio track selection early support for redirecting in http streaming
- added .rec extension file support
- CI cam drivers handling should now be better
- lot of fixes on PicturePlayer
- lot of fixes on MediaPlayer
- modified epgCache load to allow the load on e2 starts (now crossEpg works perfectly)
- fix avi 23.976fps/24.976fps/29.976fps
- added estonian language
- allowed to record/stream multiple channels from the same transponder (FTA only)

- There were a bug when a freeze happen on HD and SD channels, that bug showed you a full green pixel screen or an image repeating loop,
well this is bug was really hard to find for me and i'm not sure i've found all the cases when it happens, so... let me know if it happens again.

Many people asked me to add smart card drivers made by pacco, but i've not did them, so i will not add them like part of my images.
They can be added manually by everyone and each team made the possibilty to download and install them, so i will not add them until
i will make my own version (wich i don't know when and how it will be ready, you can use the pacco's version wich is good enought)

Enjoy it! Tideglo

incubusCamd_0_93-teta
25/09/2009, V0.93-teta
- fixed (??) EMM for all known codifies (if there are any kind of problem report as usually)
- added chid value in the provid/caid section
- added logs for EMM so we can find what's and if something is wrong or not

This is a test version. Why is published? Simply because we can't test all codifies with EMM, so not so many
improvements are made, just test if you like, otherwise use at your own.
A new version will be out as soon as we discover if EMM are cause of new bugs.

• AB Enigma 2HD support software
• 2 x DVB-S2 P&P tuner embedded
• 2 x CI Slot
• 2 x Smart Card Reader (CONAX)
• 2 x USB 2.0 (1 x Front panel and 1 x Rear panel)
• 2 x Scart
• Possible installing Plugins
• PVR function with internal or external HDD

[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]

exclusiv la HDTV ROMANIA forum

Azi a aparut @mower si a confirmat ca lucreaza la mbox, care o sa are un nou source code.In plus a spus ca termina cu armata la 6 Noembrie si o sa are mai mult timp sa se ocupa cu mbox.In plus nici o data nu a renuntat la mbox.

Si de ce nu scrii la Mbox ca sa stim si noi ceilalti?:clap:

ca sa te supari.....


:gathering:

Excelenta veste ! :clap: Asteptam cu nerabdare.