Compilare oscam

Printable View

Show 20 post(s) from this thread on one page

09-04-11, 22:33
lao

Compilare oscam

Pentru cine doreste sa-si compileze propriul oscam

STEP – BY – STEP - TUTORIAL

NEVER COMPILE AS ROOT!!!

Testet and working on ubuntu 9.10 and above!

Content:
manual.pdf
make.sh
changelog.txt
oscam_config_example.pdf

Actual supported build-platforms:
– UBUNTU >= 9.10
– DEBIAN
– FEDORA >= 11
– OPENSUSE >=11.0

Actual supported host-platforms:
– ARM-COOLSTREAM
– MIPSEL-FRTIZBOX
– MIPSEL-DREAMBOX
– PPC DREAMBOX/DBOX2
– MIPSEL-DD-WRT
– SH4-DVBAPI
– SH4-STAPI
– I386/X64 PC
– NSLU2 UNSLUNG
– MIPS-FONERA/ATHEROS
– MIPSEL-AZBOX
– ARM-DOCKSTAR

[Only registered and activated users can see links. Click Here To Register...]
10-04-11, 20:10
lao

Versiune noua 0.6.8f, cea de mai sus este V 0.6.5b

v.0.6.1
- libusb-smartreader-support fixxed (many thx to thE_29)

v.0.6.1a
- pc build with libusb fixxed
- coolstream build fixxed

v.0.6.1b
- typo error-message pc-libusb fixxed

v.0.6.1c
- Makefile: "ds_opts=... -Winline -Wextra -Wall" deleted (not longer needed)
- setup correct default config-path on each platform (hopefully all correct)

v.0.6.1d
- fritzbox7390 build fixxed

v.0.6.1e
- sh4: liboscam_stapi.v0.08 added

v.0.6.2c
- libusb fixxed #2
- pcsc fixxed
- some typo's fixxed

v.0.6.2d
- svn checkout BACKUP REV 4800 added (option 1-get/update svn)

v.0.6.2e
- alternate dl-src for dreambox/ppc/ddwrt/nslu2 added

v.0.6.3
- oscam-svn online check optimized

v.0.6.3a
- oscam-svn online check optimized part2 (thx thE_29!)

v.0.6.3b
- oscam-svn online check optimized part3

v.0.6.3c
- coolstream/azbox/dockstar-pcsc typo fixxed
- oscam-svn-onlineupdate-check set back again to 'ping'

v.0.6.3d
- ddwrt-libpath default changed to '/opt/lib'
- oupdatecheck revert to wget

v.0.6.3e
- mainsetup: option 'do_onlinecheck added'
(turn on if you'll be sure oscam-svn is online and updateable!)

v.0.6.4
- onlinecheck small fix
- mainmenu: 7-7 "easy-specials/Get-oscamSVN-Backup" added

v.0.6.4a
- onlinecheck next fix
- (x)do_onlinecheck set to default: ON
- libusb fixxed again? please test

v.0.6.4b
- libusb next fix (please try!)

v.0.6.4c
- small typo fixxed

v.0.6.4d
- buildALL: PCSC build fixxed

v.0.6.4e
- oscam-http error fixxed
(will now auto get new by svn-up!)

v.0.6.4f
- redefined pcsc-warning fixxed

v.0.6.5
- easy-specials: 7-8 create MY_OSCAMS-megapack added
- some small code fixxes
- BUILD_OLD folder added
- some path/foldernames optimized

v.0.6.5a
- oupdate EasyBuild.conf Fritzbox fixxed
- some path/foldernames optimized

v.0.6.5b
- easy-script code optimized
(Folder *_OLD no longer needed, you can simply manual rm them without probs!)

v.0.6.5c
- make.sh line 25-37: there you can change default-oscam-config-paths for oscam.conf/user/server etc.
...
###########################################################
### setup here your default oscam-config paths.... ###
###########################################################
DEFAULTCONFIG="/var/keys"
DREAMBOXCONFIG="/var/keys"
AZBOXCONFIG="/var/keys"
COOLSTREAMCONFIG="/var/tuxbox/config"
DDWRTCONFIG="/usr/local/etc"
DOCKSTARCONFIG="/usr/local/etc"
FONERACONFIG="/usr/local/etc"
FRITZBOXCONFIG="/var/media/ftp/uStor01/addons/oscam"
NSLU2UNSLUNGCONFIG="/usr/local/etc"
PCCONFIG="/usr/local/etc"
PPC_DB2_DREAMCONFIG="/var/tuxbox/config"
SH4_DVBAPICONFIG="/var/keys"
SH4_STAPICONFIG="/data/keys"
###########################################################
###########################################################
...

v.0.6.5d
- 7-8 easy-specials: create megapack fixxed

v.0.6.5e
- code from v.0.6.5c (setup default conf-paths) MOVED NOW TO: ../oscam-svn/EasyBuildScript/EasyBuild.conf
(please change if needed paths than in EasyBuild.conf!)

v.0.6.5f
- onlineupdate small fix

v.0.6.5g
- onlineupdate small fix2

v.0.6.6
- onlineupdate small fix3
if you say "N" on question: "Activate DEFAULT EasyBuild.conf"... it's your own risk if not all working,
if "N" and build-error you must manual del EasyBuild.conf and restart make.sh again!

- pcsc updated to v1.7.0 (thx thE_29)
(pcsc-values can be changed to old in EasyBuild.conf:
###PCSC##########
PCSCVERSION=1.7.0
PCSCDLID=3527
CCIDVERSION=1.4.2
CCIDDLID=3518
###OLD_PCSC#######
#PCSCVERSION=1.6.4
#PCSCDLID=3337
#CCIDVERSION=1.4.0
#CCIDDLID=3333
################## )
(if "external_Libs"-folder already exists... please del them manually before you start make.sh for using new PCSC!)

- 7-8 create megapack optimized

- toolchaind dd-wrt renamed to DDWRT

- many code fixxes part1

v.0.6.6a
- many generall code fixxes part2

v.0.6.6b
- many generall code fixxes part3
- openssl revert to v.0.9.8 (most platformas actual using it!)
- all platforms now also have libcrypto.a AND libcrypto.so (thx thE_29)
(if libcrypto.so on your os allready exists: dont replace them with these *.so generated by easy-script!)
(for using old way only *.a (oscam-binary would be bigger): del *.so on "../external_libs/os/lib", an build again!)
(with *.so oscam-binary would be smaller! )
(if you have already build before.... please del "../external_libs/os" before start 1time v.0.6.6b!)

v.0.6.6c
- many generall code fixxes/optimized part4

v.0.6.6d
- (0)-OSCam-Setup-MainSetup: (x) with_libcrypto_so -libcrypto.so en/-disable-option added (default enabled)!
(x) = libcrypto.so.0.9.8 used instead of libcrypto.a (oscam binary smaller but needed libcrypto.so.0.9.8 on running platform!)
( ) = libcrypto.a used instead of libcrypto.so.0.9.8 (oscam binary bigge but NOT needed libcrypto.so.0.9.8 on running platform!)

v.0.6.7
- many generall code fixxes/optimized part5

v.0.6.7a
- many generall code fixxes/optimized part6
- ddwrt-pcsc build fixxed

v.0.6.7b
- many generall code fixxes/optimized part7
- ccid build fixxed

v.0.6.8
- TP-LINK MIPS-AR71xx platform added (thx thE_29)

v.0.6.8a
- secure check for EasyBuild.conf + .../external_LIBS is actual
- many generall code fixxes/optimized part8
- with_ssl build fixxed (now small binaries available too! (x) wit_libcrypto.so must be acvitve!)
- fritzbox 7390 outsourced to sep. folder (build(fritzbox7390, external_libs/7390) please test!

v.0.6.8b
- many generall code fixxes/optimized part8

v.0.6.8c
- many generall code fixxes/optimized part9
- ccid-ddwrt fixxed

v.0.6.8.d
- fritzbox 7390 build fixxed

v.0.6.8e
- libcrypto.off fixxed

v.0.6.8f
- ddwrt: libcrypto.off fixxed + libcrypto build fixxed

[Only registered and activated users can see links. Click Here To Register...]
28-07-11, 06:19
cancam

fix link please

Hi I am looking for exacetly this but the latest link does not work link for v0.6.8f Regards
24-08-11, 11:36
dMd

1 Attachment(s)

oscam-easy-build.v0.8.6d

Code:

v.0.6.9 - coolstream: dvbapi fixxed v.0.6.9a - coolstream: libnxp.so fixxed v.0.6.9b - ASUS-WL*** Platform added (only static, K24 ok, K26 untestet (K26 setable by Main-Setup)!!!) - many generall code fixxes/optimized part11 v.0.6.9c - buildall: fritzbox fixxed - logfiles deactivated. All output now in terminal. On error see terminal-output v.0.6.9d - coolstream: fix libnxp.so sym doublecheck v.0.7.0 - coolstream: pcsc fixxed (thx thE_29!) v.0.7.0a - fritzbox ALL update! (gcc now 4.6 so old user must del their chain(s) in "../toolchains" and also easybuild.conf and start from beginning!) v.0.7.0b - small static-build fix v.0.7.0c - with_ssl build fix v.0.7.0d - many generall code fixxes/optimized part12 v.0.7.0e - many generall code fixxes/optimized part13 - megapack: libssl added v.0.7.0f - webif OIA modfied (showing now under configuration -> files, Default are normal!) - add file /oscam-svn/EasyBuildScript/EasyScript.patch (needed for patching webif-oia!) (you also can easily put your own diff's in too if you have one ;) ) - many generall code fixxes/optimized part14 - ddwrt default without libusb/pcsc: lrt + ldl added (please test if cccam login ok now!) - oscam binary easier identifying by name: OSCAM 1.00-unstable_EasyBuild_svn build # v.0.8.0 - pcsc updated to 1.7.2 - ccid updated to 1.4.3 - EasyScript.patch updated - Show Memory in Webif now optional, for turn on set: 0-mainsetup -> (X) Show_MEM (default off) (thx gorgone) If not 1st time build: Please del "../oscam-svn/external_LIBS" folder and also del "/oscam-svn/EasyBuildScript/EasyBuild.conf" !!! than do svn-update by: 1-y-y OTHERWAY IT WON'T WORK!! v.0.8.0a - EasyScript.patch fixxed - Easyconf check updated v.0.8.0b - EasyScript.patch del (not longer needed!) v.0.8.0c - webif oscam-http.h: Headline Size corrected to 15px v.0.8.0d - globals.h: clientmaxidle-entry corrected (max 9999 default) clientimeout-entry corrected (max 99999 default) take care to set both to your preferred timeout in your config! (if nothing set 9999/99999 are default!!!!) - oscam-http.c: webif-shutdown-restart corrected (set restarttime to 5 seconds for better refresh without 404) v.0.8.0e - many generall code fixxes/optimized part14 - get toolchains dreambox+nslu2unslung fixxed. - add toolchain ppc-tuxbox-dbox2_old for: PPC Tuxbox Old (Dbox2, Dreambox 500/600) (first do: get toolchain 4-13 than build-single 2-14, 1st time chain will build-finished and that takes some time ca 20mins up to 1h)) PLEASE TEST IF BINARY WORKING ON DBOX2! v.0.8.0f - showbuild_* off on fixxed v.0.8.1 - clientmaxidle revert to 120 also clienttimeout reverted (fixed by Admin on svn, so patch no longer needed! many thx!!) - dockstar: set build to static so on openwrt+debian working v.0.8.1a - webif: optional with Logo -> 0-mainsetup (x) With_WebLogo, default OFF (NO LOGO) (x) Webif must also active for use! if you want use different logo: edit make.sh line24 -> MYWEBIFLOGO="http://your/favorite/logo" v.0.8.1b - asuwsl: build libusb/pcsc check if always there fixxed v.0.8.1c - mainsetup 0 -> (x)With Loadbalancing added, default ON! v.0.8.1d - dvbapi ON/OFF fixxed - mainsetup 0 -> (x) AntiDisconnectClient->camd35 only add, default OFF! (if activated and using camd35-proto clients stay connected, unitresting what clientmaxidle= say!) v.0.8.1e - 0-mainsetup: (x) LCD support added, default off v.0.8.2 - dynamic threads oscam svn support added. for use set make.sh row 26/27: #MYSVN="branches/dynamic-threads" MYSVN="trunk" to MYSVN="branches/dynamic-threads" #MYSVN="trunk" NO support, no questions will be answered if using these test-branch for build! do not mixxing by svn up the normal trunk with dynamic! v.0.8.2a - check linux-packages: cvs added v.0.8.2c - sh4-stapi: libstapi v.0.8a added (>=#5773) (thx _network) v.0.8.2d - OIA build fixed v.0.8.2e - general code fixxed part 15 v.0.8.2f - create megapack: tar.gz renamed v.0.8.3 - create megapack: some small gz fix on fritzbox - fix menuentry/code against ppc-dreambox - ../EasyBuildScript/EasyBuild.info added (detailed overwiev of supportet receivers/routers etc...) (hopefully ok, if not please give me a note on streamboard @ http://streamboard.gmc.to/wbb2/thread.php?goto=firstnew&threadid=28878 ) v.0.8.3a - ppc_old dbox2/dream, ssl deactivated! won't work on these old lib*.0.9.7! v.0.8.3b - build all: dvbapi/stapi on/off first round fixxed v.0.8.3c - get nslu2unslung chain fixxed - new repository(git) for ppc_old added (old cvs.tuxbox.org down!) [thx seife!) v.0.8.3d - oscam-svn-rev > 5620 showWebLogo fixxed v.0.8.3e - oscam dynamic build fix ppc-dream v.0.8.3f - oscam dynamic build fix ppc-dream update v.0.8.3g - oscam unstable: webif-version-info size fixxed v.0.8.4 - oscam dynamic build fix i686 libusb (thx _network) v.0.8.4a - sh4 build fixxed v.0.8.4b oscam unstable: version update to 1.20 v.0.8.4c - add stable 1.10rc build: make.sh line23-29: ______________________________________________ ### dynamic-threads SVN ### #MYSVN="branches/dynamic-threads" ### unstable-trunk SVN ### MYSVN="trunk" ### stable SVN ### #MYSVN="tags/1.10" ############################################# _______________________________________________ remove "#" for your preferred build BUT DONT MIX IT! always use for each MYSVN an empty folder and place make.sh in than do 1-Y !!! v.0.8.4d - ALL: remove anti-disconnect from config (not longer working) v.0.8.4e o-update ALL: fix MYSVN= if not default! v.0.8.4f - ALL: build fixxed v.0.8.4g - ALL: build fixxed part2 v.0.8.5 - config: ipv6support (WebIf IPv6 support) added (experimental see timeline) v.0.8.5a - oscam-setup->mainsetup fixxed v.0.8.5.b - fritzbox70**/71**/72**: freetz-trunk-gcc updated from 0.9.29 to 0.9.31.1 so please del old "../oscam-svn/toolchains/freetz-trunk" also del "easybuild.conf" and "external_LIBS/Fritzbox" and rebuild! or revert on make.sh to old: # old number #FRITZGCCNUMBER="0.9.29" # new number FRITZGCCNUMBER="0.9.31.1" v.0.8.5c - fritzbox build: little cosmetic v.0.8.5d - fritzbox7390: set back to correct gcc 0.9.29 # old number #FRITZGCCNUMBER="0.9.29" # new number FRITZGCCNUMBER="0.9.31.1" FRITZGCCNUMBER7390="0.9.29" v.0.8.5e - fritzbox7390: little cosmetic v.0.8.6 - fritzbox build: seperated 7140/70 + 7240/70 + 7390 - new entry in 0-oscam-setup -> FritzboxSetup please activate there your preffered fritzbox, than 4-get_toolchains and build for them by 2-2. (note for 7240/70: take care you have also updated your Fritzbox-Firmware to actual ones(uclibc0.9.31.1)! if not oscam binary can give segfaults!) v.0.8.6a - pcsc updated to 1.7.4 - ccid updated to 1.4.4 (please del external_LIBS -folder and easybuild.conf than start make.sh again for using new pcsc/ccid) easybuild.conf: ###PCSC########## PCSCVERSION=1.7.4 PCSCDLID=3598 CCIDVERSION=1.4.4 CCIDDLID=3579 v.0.8.6b - all boxes with internal-CR "SCSI_DEV" now generally activated!(dreambox, azbox, coolstream, ppc-dreambox, ppc-old-dreambox/dbox2) v.0.8.6c - DEV_SCI SPECIAL for sh4 boxes add (see main-setup!) (if need sh4-internal-CR support activate: ONLY sh4 entry, else NOT-SH4!) on build-all for ALL sh4 SCI is off so if needed use singelbuild-option ONLY! v.0.8.6d - DEV_SCI_SH4 fixxed Orice versiune oscam-easy-build poate fi descarcata de aici : http://www.streamboard.tv/wbb2/thread.php?threadid=29019&threadview=0&hilight=&hilightuser=0&page=2 (necesita logare)
19-09-11, 18:17
dMd

1 Attachment(s)

[B] oscam-easy-build.v0.8.7 d[/B]

Code:

v.0.8.6e - WD(LX)TV LIVE Platform added, please test if binaries working on it!!! v.0.8.7 - wdtv hopefully fixxed (switched toolchain to wdtvtools-svn!) - some small code cleanup v.0.8.7a - coolstream int. Reader fixxed - wdtv chain for test linked to dmm-mipsel-toolchain (for wdtv build you must 4->get-toolchains-dm-mipsel done! static-build-wdtv only possible WITHOUT libusb!) for wdtv please del: /oscam-svn/EasyBuildScript/EasyBuild.conf /oscam-svn/BUILD/WDTV /oscam-svn/external_LIBS/WDTV - oscam.to svn-mirror added (will auto used if streamboard svn down!) v.0.8.7b - svn mirror fixxed v.0.8.7c - oscam rev# name fixed v.0.8.7d - buildall fixxed - wdtv fixxed

[Only registered and activated users can see links. Click Here To Register...]
27-11-11, 19:50
lao

oscam-easy-build.v0.8.7 e

oscam-easy-build.v0.8.7 e

Code:

v.0.8.7e - ubuntu 11.0 fix

[Only registered and activated users can see links. Click Here To Register...]
30-03-12, 13:54
Black_Angel

ar putea si mie compila o vers de Oscam

oscam-svn6576-mips-tuxbox-webif-Distribution.tar

in oscam-svn6576-mips-tuxbox-webif-Distribution.nab.tar

din pacate - nu inzeleg deloc cum se face - adica nu sunt in stare
30-03-12, 16:29
dMd

Ceea ce vrei tu este de fapt arhivare in format Nabilo, pentru autoinstalare si nu are treaba cu compilarea.
27-06-12, 17:43
lao

1 Attachment(s)

v.1.0.0
- switched to new make-gfto
- sh4-stapi not longer supportet
- azbox build default off (as it's to old gcc-3.4.2, very tricky install those old compiler to distribution)

v.1.0.0a
- 3-build-all fixxed
- switched to new coolstream-chain, it's finsihed chain so no need to build from coolie-svn (thx gorgone)

v.1.0.0b
- pcsc build fixxed

v.1.0.0.c
- some code cleanup, warnings fixxed
(please del Makefile.local, than do 1-y-y-y again)

v.1.0.0.c
- pc i686/x86_64 libusb build fixxed

v.1.0.0.e
- libusb set to 1.0.9
- readd scsi_dev(sh4) to main setup again (maybe these reacvtivate internal readers please test)

v.1.0.0.f
- show_info fixxed
27-06-12, 22:02
lao

Ai dreptate, in concluzie hai sa mai actualizam informatiile necesare si sa le completam mura-n gura:
Necesar:
- masina linux cu ubuntu, fedora, opensuse, debian (cazul meu)
- se verifica existenta pachetelor necesare:

Code:

apt-get update apt-get upgrade apt-get install build-essential apt-get install subversion apt-get install cmake dialog

Oscam pentru masina curenta se poate compila si ca root:

Code:

cd /home/lao/ svn co http://streamboard.gmc.to/svn/oscam/trunk oscam-svn

sau daca se doreste o anumita versiune

Code:

svn co http://streamboard.gmc.to/svn/oscam/trunk oscam-svn -r 6197

Apoi

Code:

cd oscam-svn/ mkdir build ./config.sh -g

Apare o fereastra in mod grafic
[Only registered and activated users can see links. Click Here To Register...]
Alegem Add-ons si apare
[Only registered and activated users can see links. Click Here To Register...]
Alegem optiunile necesare cu space bar apoi Enter
Trecem la urmatoarea
[Only registered and activated users can see links. Click Here To Register...]
De obicei alegem numai protocoalele care dorim sa le folosim
Apoi
[Only registered and activated users can see links. Click Here To Register...]
La fel, lasam selectat numai readerele pentru care avem card. Salvam iar cu Enter, ajungem in fereastra initiala, selectam Save si Enter
Apoi

Code:

cd build/ cmake -DWEBIF=1 .. make

Gasim binar-ul oscam dupa ce se termina compilarea in /home/lao/oscam-svn/build/

Va urma
28-06-12, 11:36
lao

Compilare oscam pentru receptoare, routere, etc

Necesar= acelasi

IMPORTANT
Nu compilam ca root, ne logam pe un cont de user

Code:

su lao

Descarcam si dezarhivam scriptul de compilare oscam-easy-build.v1.0.0f.zip‎
Acesta contine 4 fisiere, scriptul make.sh, 2 fisiere PDF care contin explicatii si exemple si changelog.txt
Urmatorul pas este sa verificam/modificam cate ceva in script
Deschidem cu un editor scriptul, de preferat notepad++ si incepand cu linia 1051 avem

Quote:

default oscam-config paths

Verificam daca calea default e corecta pentru device-ul nostru, daca nu, modificam

Quote:

DEFAULTCONFIG=/var/keys
DREAMBOXCONFIG=/var/keys
AZBOXCONFIG=/var/keys
COOLSTREAMCONFIG=/var/tuxbox/config
DDWRTCONFIG=/usr/local/etc
DOCKSTARCONFIG=/usr/local/etc
FONERACONFIG=/usr/local/etc
FRITZBOXCONFIG=/var/media/ftp/uStor01/addons/oscam
NSLU2UNSLUNGCONFIG=/usr/local/etc
PCCONFIG=/usr/local/etc
PPC_DREAMCONFIG=/var/tuxbox/config
PPC_DB2_DREAM_OLDCONFIG=/var/tuxbox/config
SH4_DVBAPICONFIG=/var/keys
TPLINKCONFIG=/usr/local/etc
ASUSWLCONFIG=/opt/etc
WDTVCONFIG=/etc

In cazul meu, pentru care voi continua explicatiile, mipsel Enigma2 e gresit. Asa ca modific:

Quote:

DEFAULTCONFIG=/etc/tuxbox/config
DREAMBOXCONFIG=/etc/tuxbox/config

Eu am modificat si linia 22

Quote:

MYWEBIFLOGO="http://tinyurl.com/69v5jqq"

asa, pentru ca nu-mi trebuie poze, sa am ecranul mai liber

Quote:

MYWEBIFLOGO=""

Bineinteles, puteti sa mai faceti si alte modificari, asta daca stiti exact ce trebuie :)
Acum facem pasii din postul anterior

Code:

cd /home/lao/ svn co http://streamboard.gmc.to/svn/oscam/trunk oscam-svn cd oscam-svn/ ./config.sh -g

Configuram
- Add-ons
- Protocols
- Reader
Apoi salvam
Daca va este necesar, nu uitati sa bifati Have Dvbapi
Copiem scriptul make.sh in /home/lao/oscam-svn/
ii dam atribut 755 apoi il rulam

Code:

./make.sh

Acum intram din nou in mod grafic
[Only registered and activated users can see links. Click Here To Register...]
tastam 5 si Enter
Daca e cazul, va trebui sa instalati/actualizati pachete din linux
Dupa aceea Enter pentru a reveni in meniul anterior
Tastam 4 si Enter
[Only registered and activated users can see links. Click Here To Register...]
tastam 2 pentru Dreambox mipsel enigma2 (fiecare tasteaza pentru ce are el)
incepe sa descarce fisierul de care are nevoie, e specific pentru fiecare device
Toolchain_mipsel-tuxbox-linux.Dreambox.tar.bz2
si
openssl-0.9.8.tar.gz
in /home/lao/oscam-svn/Download/
0-Oscam setup nu mai functioneaza si ne invita sa rulam:

Code:

./config.sh -g

ceea ce am facut deja
In 6 putem vedea niste informatii despre optiuni compilare
[Only registered and activated users can see links. Click Here To Register...]
in 7 mai exista niste optiuni
[Only registered and activated users can see links. Click Here To Register...]
Dar nu-s uzuale si nu prea avem treaba cu ele
tastam 2
[Only registered and activated users can see links. Click Here To Register...]
apoi 1 (cazul meu)
Incepe compilarea
fisierul binar este in /home/lao/oscam-svn/BUILD/DREAMBOX/DEFAULT/WEBIF/
sub numele oscam-svn7083-DREAMBOX-DEFAULT-WEBIF
28-06-12, 17:31
lao

Multi blameaza oscamul. Intradevar, e stufos si greu de controlat comparativ cu 3C. Dar si realizarile posibile sunt altele!
Nu am pretentia ca stiu, doar "sap", si mai gasesc cate ceva interesant prin el.
Imi cam prind urechile prin surse, totusi mai iese cate ceva bun, functional sau de fatada!
Modificand in surse inainte de compilare poti sa schimbi multe, numai ca trebuie sa stii ce faci!
Un exemplu, doar de efect...
Linie C din oscam in 3C apare asa in phpinfo din cccam
[Only registered and activated users can see links. Click Here To Register...]
sau
[Only registered and activated users can see links. Click Here To Register...]
28-06-12, 18:31
laleauaneagra

din cate stiu numa daca pui vers de 2.1.1....in alta nu merge

daca erai atent aparea si la mine cccam-laleua:)

---------- Post added at 16:31 ---------- Previous post was at 16:30 ----------

apropo iti multumesc din nou ptr acel MURA IN GURA de mai sus

ca vad ca tot dispare
03-07-12, 22:22
oldmax

oscam

Buna,am gasit si eu pe youtube cum se face.

Dar vad ca mai e pus filmul pe 2 forumuri..daca nu e voie se poate sterge(odata cu userul meu normal)
Toate cele bune
23-07-12, 07:36
dMd

Adresa Oscam a fost schimbata. Inlocuiti in URL gmc.to cu de.vu

Quote:

Exemplu:

svn co [Only registered and activated users can see links. Click Here To Register...].gmc.to/svn/oscam/trunk oscam-svn
svn co [Only registered and activated users can see links. Click Here To Register...].de.vu/svn/oscam/trunk oscam-svn
[Only registered and activated users can see links. Click Here To Register...].gmc.to/wbb2/thread.php?threadid=29019&threadview=0&hilight=&hilightuser=0&page=2
[Only registered and activated users can see links. Click Here To Register...].de.vu/wbb2/thread.php?threadid=29019&threadview=0&hilight=&hilightuser=0&page=2
23-07-12, 11:19
dMd

1 Attachment(s)

oscam-easy-build.v1.0.1e

Quote:

v.1.0.1.a
- build fix
(please del also all in /Patches, than 1-y-y-)

v.1.0.1b
- fix 3-build all
- fix fonera showbuild on/off

v.1.0.1c
- fix internal-CR-support for mipsel+ppc+sh4, thx gfto
(not needed for activating by osd, it will auto do it!)

v.1.0.1d
- hd+ turnout fix, thx irata

v.1.0.1e
- update to new oscam/streamboard url
(please start make.sh in new empty folder, otherway it wont work!)
23-07-12, 20:06
lao
Am gasit un alt script, poate mai simplu de utilizat si am trecut pe el
Stie urmatoarele:

supported platforms

Code:

-native if compiler installed x86 x64 arm (dockstar) -dbox2, dreambox 500,500-S -dreambox 600,000,7020 -dreambox 500HD,800,800se,8000,7025 -openembedded 2.0 + new toolchain (gcc4.7 64bit build) -fritzbox 33XX -fritzbox 72XX -fritzbox 73XX -raspberry pi hard fpu -raspberry pi soft fpu -powerpc -dockstar -coolstream -sh4 -sh_4 (new toolchain gcc 4.6.3 64bit build) -tplink (1043ND) -fonera -ddwrt 2.4 -ddwrt 2.6 -openwrt 3.4.6 -openwrt 4.1.0 -arm nslu2 unslug -arm nslu2 openwrt

simplebuild 1.07

IMPORTANT
MUST INSTALL THIS PACKAGES BY HAND
1. dialog
2. uni2ascii
3. xz-utils
4. subversion
5. awk gawk or mawk (gawk is debian default)
6. lib32z1 (for 64bit)
  
  NATIVE
7. libusb-dev for libusb support
8. libssl-dev for ssl support
Code:

cd /opt mkdir simplebuild cd simplebuild wget http://ss4200.homelinux.com/oscam/simplebuild chmod 777 simplebuild ./simplebuild checksys ./simplebuild menu

Daca apare o versiune noua de script te anunta la pornire si poti face update, descarca oscam ultimul/versiune aleasa, meniuri simple si intuitive, viteza sporita la compilare

Tnx @ Gorgone (Streamboardler )
25-07-12, 19:37
lao

Se poate actualiza din script sau

Code:

wget http://ss4200.homelinux.com/oscam/simplebuild

Quote:

simplebuild 1.16
-fix typo

simplebuild 1.15
-size check changet

simplebuild 1.14
-SVN online check changet

simplebuild 1.13
-adding a little bit fun for the console users (bouncing wait coursor on build)

simplebuild 1.12
-fix build sh4 with nostapi (thanks basta2k for report)

simplebuild 1.11
-add local remote compare to skipp checkout if equal (menu version)
-change internal script structure with separate departments

simplebuild 1.10
-tryfix relinking lib path

simplebuild 1.09
-openwrt26 ddwrt410 reactivated
-small fixes on commandline mode

simplebuild 1.08
-extended "./simplebuild checksys" now all packages
27-07-12, 22:27
lao

simplebuild 1.17
-try fix relink paths in console build (latte0815 reported)

[Only registered and activated users can see links. Click Here To Register...]
30-07-12, 18:32
lao
simplebuild 1.26
please clear the toolchains/config/* if u have some trouble
-config.extra used by default
-pcsc console enable
-extra custom_suffix used on console and pack
-fixed directmenu="1" start with ./simplebuild menu
-set back to default on empty custom_suffix
-new console commands (if u have enabled on extra u can now disable on console)
1. dvbapi_on dvbapi_off
2. static_on static_off
3. stapi_on stapi_off
4. pcsc_on pcsc_off
5. usb_on usb_off
6. ssl_on ssl_off
7. pack_on pack_off

Show 20 post(s) from this thread on one page