Infinity USB Smart (dreambox)

Printable View

02-04-09, 11:07
me1960

Infinity USB Smart (dreambox)

Infinity USB Smart (dreambox)

Infinity USB Smart (suitable as an external USB card reader works the same as Smargo)

Infinity USB Smart can be used as either a Phoenix / Smartmouse programmer (3.58/3.68/6.00Mhz) or as an external USB card reader (for Linux receivers such as Dreambox) it works the same as a Smargo SmartReader+

Description:

New module based smartcard reader
The Infinity USB Smart is a new module based smartcard reader, with a new approach for ensuring a very high level of compatibility and functionality.

The core functionality is a phoenix/smartmouse interface, compatible with any Windows, Linux-based system or embedded Linux-based systems like DreamBox, Set-top boxes (STB) or other industrial controller.

This is just one of the features of the Infinity USB Smart. The module-based approach makes it possible to install new modules any other smartcard related functionality or standalone operation!

The innovative dome-shaped design with upright card insertion, makes one-hand operation possible while keeping a small footprint on the desk.

Driverless USB
Infinity USB Smart is connected to a PC using a single USB 2.0 connection (backwards compatible with USB 1.1). Since Infinity USB Smart is based on the HID standard, no custom drivers are needed, and installation is as easy as inserting the USB connector.

Up to 127 units can be installed on one single host (a PC or embedded system), and if needed a USB hub can be used to extend the number of USB connections on the host.

Phoenix/Smartmouse (VCP)
The core functionality of Infinity USB Smart is to provide Phoenix/Smartmouse compatibility through a virtual COMport (VCP). The VCP has been very thoroughly tested with most popular applications and cards. Setting up the VCP is done through the accompanying software, and all popular frequencies (3.58, 3.68 and 6.00MHz) and a boost mode can be selected.

Linux support
VCP modules are available and ready for the Linux operating system, making it possible to use the Infinity USB Smart on both Linux-based PCs, or with embedded systems. Industrial controllers, Set-top Boxes (STB) like DreamBox or any other Linux embedded system with USB host controller can be used.

Infinity USB Smart (Smart VCP module) guide for Linux

It is possible to use the Infinity USB Smart (Smart VCP module) directly on Linux, a DreamBox or other Linux based embedded systems. A serial port ('/dev/ttyusb0' or '/dev/usb/tts/0') will be created as soon as the Infinity USB Smart is connected to the USB port on the Linux based system.

This guide explains how to install the Smart VCP module and connect the Infinity USB Smart on a Linux based PC, a DreamBox or any other Linux based embedded system, for instance a set-top box (STB).

1. Set the switch on the bottom of the device to the "NORMAL" position.
2. Connect the Infinity USB Smart to a Windows PC.
3. Default drivers for Infinity USB Smart will install automatically if needed.
4. Install the Infinity USB Smart software, and run the software when done.
5. From the menu select "Tools->Install module".
6. Select the "Smart VCP 3.58MHz Smartmouse" module.
7. Press "Update".
8. A few seconds later the module will be installed.
9. Close the software and disconnect the Infinity USB Smart from the PC.
10. Set the switch on the bottom of the device to "MODULE".

Most Linux distributions and DreamBox images have USB serial drivers included. Simply connect the USB cable to the STB or PC and a serial port will be available as either '/dev/usb/tts/0' or '/dev/ttyusb0'.

Module based
Infinity USB Smart is module based, with separate firmware based modules. This means that the new firmware modules can be installed and downloaded to the hardware when new functionality is needed.
Currently modules for use with Linux embedded systems are ready for download, and more will be available later, and on user demand.
Installing a module is easy with the Infinity USB Smart software, simply choose a module and press a single button. The modules are complete selfcontained "building blocks", working completely independent from the main-module (VCP).
Choosing between the main-module and user installed modules are done with a small switch on the bottom of the Infinity USB Smart hardware.

Innovative design
The dome shaped design, with an injection-moulded casing in matte white ABS, will look good on any desk. The smartcard is inserted from the top, making one-hand operation easy, and leaving just a small footprint on the desk.
A dual-colour red/green LED indicates the different states of the programmer.

Package contains
Your Infinity USB Smart will be delivered in a box containing:

· Infinity USB Smart programmer
· Fixed transparent USB 2.0 cable (1.8m)
[Only registered and activated users can see links. Click Here To Register...] [Only registered and activated users can see links. Click Here To Register...] [Only registered and activated users can see links. Click Here To Register...] [Only registered and activated users can see links. Click Here To Register...] [Only registered and activated users can see links. Click Here To Register...]

INFINITY USB SMART SETUP SOFTWARE ( download ):

[Only registered and activated users can see links. Click Here To Register...]

INFSMARTUSERSMANUAL.PDF (download ):
[Only registered and activated users can see links. Click Here To Register...]
15-01-10, 17:57
samavi

Infinity USB Smart with dreambox 7020

Hello !

I have just received my Infinity USB Smart
i followed your tuto but i cant have it work under
Cccam 2.1.3 in dreambox 7020 ( image gemini 4.60 )

Cant you help me please in being more specific on Cccam.cfg
configuration file ?

Thank you so much !
15-01-10, 20:11
Diablo1

@samavi

SERIAL READER : /dev/usb/tts/0 infinity
SMARTCARD CLOCK FREQUENCY : /dev/usb/tts/0 6000000

mfg
26-08-10, 11:05
michael86

salut !
dupa indelungi cautari si setari nu reusesc sa pornesc acest reader in 800 cu gp 5.0 E2
[Only registered and activated users can see links. Click Here To Register...]
log din oscam cu gigi :
---------------
>> OSCam << cardserver started at Thu Aug 26 08:41:41 2010
-------------------------------------------------------------------------------
2010/08/26 8:41:41 30906 s version=0.99.4svn, build #2515, system=mips-tuxbox-linux
2010/08/26 8:41:41 30906 s max. clients=29, client max. idle=120 sec
2010/08/26 8:41:41 30906 s max. logsize=102400 Kb
2010/08/26 8:41:41 30906 s client timeout=5000 ms, fallback timeout=2000 ms, cache delay=150 ms
2010/08/26 8:41:41 30906 s shared memory initialized (size=492902, fd=5)
2010/08/26 8:41:41 30906 s auth size=4756
2010/08/26 8:41:41 30906 s services reloaded: 0 services freed, 0 services loaded
2010/08/26 8:41:41 30906 s userdb reloaded: 0 accounts freed, 1 accounts loaded, 0 expired, 0 disabled
2010/08/26 8:41:41 30906 s signal handling initialized (type=sysv)
2010/08/26 8:41:41 30906 s oscam.srvid loading failed, old format
2010/08/26 8:41:41 30906 s can't open file "/var/tuxbox/config/oscam.provid" (err=2), no provids's loaded
2010/08/26 8:41:41 30906 s 0 lengths for caid guessing loaded
2010/08/26 8:41:41 30906 s monitor: initialized (fd=10, port=xxx)
2010/08/26 8:41:41 30906 s camd 3.3x: disabled
2010/08/26 8:41:41 30906 s camd 3.5x: disabled
2010/08/26 8:41:41 30906 s cs378x: disabled
2010/08/26 8:41:41 30906 s newcamd: initialized (fd=11, port=15000, crypted)
2010/08/26 8:41:41 30906 s CAID: 1802
2010/08/26 8:41:41 30906 s provid #0: 002111
2010/08/26 8:41:41 30906 s provid #1: 000000
2010/08/26 8:41:41 30906 s cccam: disabled
2010/08/26 8:41:41 30906 s radegast: disabled
2010/08/26 8:41:41 30906 s logger started (pid=30908)
2010/08/26 8:41:41 30906 s resolver thread started
2010/08/26 8:41:41 30906 s http started (pid=30910)
2010/08/26 8:41:41 30906 s reader started (pid=30911, device=/dev/ttyUSB1, detect=cd, mhz=368, cardmhz=368)
2010/08/26 8:41:41 30906 s waiting for local card init
2010/08/26 8:41:41 30910 h HTTP Server listening on port 0
2010/08/26 8:41:41 30911 r02 ERROR opening device /dev/ttyUSB1
2010/08/26 8:41:41 30911 r02 Cannot open device: /dev/ttyUSB1
am incercat si cu setari in
device = /dev/usb/tts0
si cu altele : nu vrea !
help !
26-08-10, 12:47
Duster

DIGI si OSCAM.

Cardul digi nu merge bine nici cu Infinity nici cu Smargo celputin cu Oscam. Trebuie sa pui un reader Phoenix, ps. degeaba pui in mod phoenix celelalte 2 cititoare. Deci cu phoenix merge doar digi.
26-08-10, 18:44
michael86

readerul e un smartmouse + phoenix , are posibilitatea de a seta freq si tensiunea .
cu cardul jijinos am incercat in ambele variante si nu a vrut !
am incercat cu cardul de dolce ( pentru el am cumparat acest prod. ) si la fel
am incercat cu tvrhd la fel .
deci nu e vb de card , cred ca e o problema din setari - device sau setarile smartmouse .
other ideas ?:wellcome:
27-08-10, 17:04
Diablo1

Sal

Gp 5 are ceva probleme in Oscam + Smargo
In primul ränd vezi daca il recunoaste Dm
Deschide telnet :
ii dai comanda :
ls /dev/ttyUSB*
va trebui sa iti arate asa:

PHP Code:

************************** * * * The Gemini Project * * * ************************** OpenDreambox 5.0.0 dm800 dm800 login: root root@dm800:~# ls /dev/ttyUSB* /dev/ttyUSB0 root@dm800:~#

asta e gresit

Code:

am incercat si cu setari in device = /dev/usb/tts0

corect

Code:

device = /dev/ttyUSB0

Daca iti aratä corect smargo trebuie sa mai umbli sa seturile pentru el
in ce mod il pui am inteles ca ai putea sa scrii cu el