"HOW TO" incubus camd 0.70

mai jos o sa va explic cum setam pe incubuscamd ca client la server cccam si la server newcs la aceas timp.

Avem o carta de NOVA in newcs si doi linii pt doi diferite server CCCAM.

Config e asa

##############################################################################
# incubusCamd configuration file #
# All configuration options in this file observe the same format: #
# <configuration_name>=<configuration_value> #
# #
# Each section are [<section_name>:<option_1>:<option_x>] like. #
# #
# No matter about white spaces on any place or UNIX/DOS style files #
##############################################################################
########################### general configuration ############################
[General]
# Enable (1) or disable (0) background execution
# 0 - Off
# 1 - On
background_execution=1
# This sets the level of console output for debugging:
# 0 - No debug messages, 1 - First level debug messages, 2 - Second level debug messages,
# 3 - Print all debug messages
debug_level=3
# This option enables (1) or disables (0) the writing of debug information to the
# console.
log_to_console=1
# This option enables (1) or disables (0) the writing of console output to a log file
log_to_file=0
# When log_to_file is set to 1, this is the path and filename to write console
# ouput to.
logfile_name=/var/bin/camd.log
# Used to activate on-screen messages. Username and password required if
# HTTP authentication is enabled on enigma.
on_screen_messages_show=1
on_screen_messages_username=root
on_screen_messages_password=
on_screen_messages_key_update=1
on_screen_messages_wait_for_key_update=0
on_screen_messages_ecm=0
on_screen_messages_emm=0
#When activated, camd will listen on the specified port for connections. All
#log activity will be broadcast in real-time to connected clients.
console_logs_broadcast=1
console_logs_broadcast_port=666
############################ caid configuration ##############################
#
# First of all the cam use the incubusCamd.prio file, then use the
# configuration below.
# Sections are defined by the value of the CaID.
# You can choose the default ecm table used by the codify, this means that
# you can choose the first byte of the raw ecm that is downloaded from sat.
# If you don't know what value to insert, use "80". (all value are in hex)
# Default value for ecm_table is 0x80.
# The option "priority" tells if one caid should be selected before try
# another one with a priority value greater.
# The less is the value the greatest is the priority. Choose from "0" to any value,
# priority value is decimal.
#
[CaID:0100]
ecm_table=80
priority=1
[CaID:0500]
ecm_table=80
priority=1
[CaID:0600]
ecm_table=80
priority=1
[CaID:0919]
ecm_table=80
priority=1
[CaID:093B]
ecm_table=80
priority=1
[CaID:0B00]
ecm_table=80
priority=1
[CaID:0D00]
ecm_table=80
priority=1
[CaID:1700]
ecm_table=80
priority=1
[CaID:1800]
ecm_table=80
priority=1
[CaID:2600]
ecm_table=80
priority=1
########################### provider configuration ###########################
#
# All parameters are in hexadecimal notation.
# Each section is defined by the provider id value.
# If you don't know the provider id value then use the provider id "000000" and ca id "0000".
# On provider 000000 caid 0000 goes all provider wich are not declared. If the provider
# is declared then the cam will use the provider founded.
#
[Prov:000000:CaID:0604] #Aici la CaID trebuie sa pune ce CaID arata la newcs de exemplu pt irdeto punem 0604 pt conax 0b00.
# ----------------------------------------------------------------------------
# URL of card-server to use, formats are as follows:
#
# newcamd://<username>:<password>@<hostname>:<port>/<des_key>
# aroureos://@<hostname>:<port>
# radegast://@<hostname>:<port>
newcamd://abipbox:1234@127.0.0.1:10110/2222222222222222222222222222 #Aici trecem pe linia care avem de la newcs adica abipox e username,1234 e password iar 127.0.0.1 e adresa locala unde e cartela daca e in alte parte il punem cu xxx.dyndns.org
#
# Example:
# #newcamd://foo:bar@192.168.0.100:12345/0CE3476FF2E1C9D9A0A109B371E3
#
# Multiple card-server url's can be specified for server fail-over.
# If the emu fails to connect or fails to get valid CW's, it will try to
# connect to other servers in a round-robin fashion.
#
# Up to 16 servers can be added from index 0 to 15.
#
# You can choose also to select a cccam or gbox server, but they must be declared
# in the "servers configuration" section ( [Servers] ).
# e.g. : if you want to use a cccam server for a provider you must put it on
# the parameter card_server_url_0=cccam://
# NO MATTER the value after the double slash because server configuration is
# made in the section [Servers].
# Only for newcamd, radegast and aroureos is usefull to put correct connection
# parameters because they are provider dependent.
#
#
# Example i want to use mine card into the slot with newcs for prov 0501 on nagra3 (caid 1833)
[Prov:000000:CaID:0604] # Aici iar corectam pe CaID cu asta care are cartela noastra,fiti atenti daca punem 0000 o sa cere pt orice provider key din carta noastra si rezultatul o sa fie sa pica server.
# ----------------------------------------------------------------------------
# Multiple card-server url's can be specified for server fail-over.
# If the emu fails to connect or fails to get valid CW's, it will try to
# connect to other servers in a round-robin fashion.
#
# Up to 16 servers can be added from index 0 to 15.
#
# URL of card-server to use, formats are as follows:
#
# newcamd://<username>:<password>@<hostname>:<port>/<des_key>/[EMM]
# aroureos://@<hostname>:<port>/[EMM]
# radegast://@<hostname>:<port>/[EMM]
#
card_server_url_2=newcamd://abipbox:1234@127.0.0.1:10110/2222222222222222222222222222/EMM # aici completam iar pe username si password care avem de la newcs,daca dorim sa face update la cartela adaugam si pe /EMM si face update singura cartela fara sa fie nevoie sa folosim alte emu.Fiti atenti card_server_url_2 sa fie 2 si daca avem si alte cartele il punem cu 2,3,4,5,6 etc.
#card_server_url_1=newcamd://username:password@192.168.0.101:10551/0102030405060708091011121314/EMM
#card_server_url_2=newcamd://username:password@192.168.0.102:10552/0102030405060708091011121314/EMM
[Prov:000000:CaID:0000] # aici trebuie sa fie si Prov si CaID 0000 ca sa cere de la cccam toate cartele diferit o sa cere un anumita cartela.
# this provider is a stand-in for all cards and all caid not declared previously
#
# For example I choose to use cccam protocol on all other provider.
#
card_server_url_0=cccam://ipbox:4212@192.168.1.4:12000
card_server_url_1=cccam://mutare:palako@dolo.dyndns.com:12000 # Aici scrim pe server care avem pt cccam,primul server e local iar al doila e din alte parte.
########################### servers configuration ############################
[Servers]
#
# This is the section for the multi-server configuration.
#
# URL of card-server to use, formats are as follows:
#
# cccam://<username>:<password>@<hostname>:<port>/<receive_emu_shared>/[EMM]
# where <receive_emu_shared> should assume value "yes" (without quotes, if you like to receive emus data shared by the server) or "no" (this is assumed by default)
#
# gbox://<localhost>:<localport>:<password>@<peer_address>:<peer_port>:<peer_pass>/[EMM]
#
# NOTE: The "EMM" suffix is optional and tells the card-server client whether
# to send EMM's to the card-server or not. Enabling or disabling this only
# has effect if the card-server is configured to accept emms from this client.
#
# NOTE 2: The "card_server_url" is not the same as previously declared in the prov/caid section
# use how many server as you like
#
card_server_url=cccam://ipbox:4321@192.168.1.4:12000
card_server_url=cccam://mutare:palako@dolo.dyndns.com:12000 #Aici scrim inca o data pe servers care avem.ATENTIE mare fara numar 0,1,2,3 dupa card_server_url=cccam://



Sper ca am ajutat pe cine nu stie!La mine functioneaza perfect si amindoi server cccam si carta care e la newcs.Special carta care e la newcs acuma e mai stabila si nu pica deloc fata de combinatie mbox/newcs.

Inca nu am reusit pt ei care au doi sloturi de exemplu ipbox sa pun amindoi linii newcs sa merge.Daca vrea sa da un sfat cineva astept!

Din pacate nu am reusit sa fac update la cartela cu EMM activat.O sa alarmez pt problema asta pe baietii.

pe E2 Sifteam a incercat cineva ?

[Prov:000000:CaID:0000]

card_server_url_0=cccam://

[Servers]

card_server_url=cccam://user:pass@server1.no-ip.info:12000

card_server_url=cccam://user1:pass1@server2.no-ip.info:12000

card_server_url=cccam://user2:pass2@server3.no-ip.info:12000



asa trebuie sa arate

oke, sa inteleg ca merge bine doar cu cccam? eu am incercat cu newcamd si nu merge :( cu gbox/mbox nici nu am mai incercat ca nu avea sens :)
cccam este tata/mama emulatoarelor, sau de ce il cauta toti?

Cel putin la mine cu 3 linii cccam si o cartela din newcs merge.Dar la anumite provider pica incubus si trebuie sa il dai restart.Idea e ca suntem la drumul bun....Astept pe urmatoare versiuna!