Versione 8.6c:
[Only registered and activated users can see links. Click Here To Register...]
- GAMMA Card. Added Erase and program with .GAM file
Printable View
Versione 8.6c:
[Only registered and activated users can see links. Click Here To Register...]
- GAMMA Card. Added Erase and program with .GAM file
Daca avem G@MM@ card cu noua versiuna putem sa il programam foarte usor fara cablu serial nu mai cu cablu USB.Mai jos e toate procedura:
CAS STUDIO 8.6c and i guess future upper updates
STEPS for successfully programming
1-
open cas 3
2-
connect power usb cable of cas 3 to your pc/laptop
3-
click smart card tab
4-
choose ***** tab
5-
insert ***** chip down
(details of atr will appear if card is healthy)
6-
in the flash tab down brose the request file that you have unzipped before
7-
click/hit the write button on the right
(the card automatic will erase older file and will write/overwrite the new one)
8-
wait until you see the progress 100%
9-
DONE
close and exit
NO serial cables
NO usb to 9 pin adaptors for laptop users
NO ***** loaders