Quote:
[ 4754.216092] ata3: SATA link down (SStatus 0 SControl 300)
[ 4768.140077] ata3: link is slow to respond, please be patient (ready=0)
[ 4769.460085] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4769.472469] ata3.00: ATA-10: ADATA SU750, XA044R07, max UDMA/133
[ 4769.476947] ata3.00: 2000409264 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 4769.499811] ata3.00: Features: Dev-Sleep
[ 4769.540955] ata3.00: configured for UDMA/133
[ 4769.541151] scsi 2:0:0:0: Direct-Access ATA ADATA SU750 4R07 PQ: 0 ANSI: 5
[ 4769.541611] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 4769.541691] sd 2:0:0:0: [sdc] 2000409264 512-byte logical blocks: (1.02 TB/954 GiB)
[ 4769.541730] sd 2:0:0:0: [sdc] Write Protect is off
[ 4769.541735] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 4769.541782] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4769.541848] sd 2:0:0:0: [sdc] Preferred minimum I/O size 512 bytes
[ 4769.544826] sdc: sdc1
[ 4769.544987] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 4887.628085] ata3.00: exception Emask 0x0 SAct 0x80000 SErr 0x0 action 0x6 frozen
[ 4887.628131] ata3.00: failed command: READ FPDMA QUEUED
[ 4887.628150] ata3.00: cmd 60/08:98:80:cf:3b/00:00:77:00:00/40 tag 19 ncq dma 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 4887.628199] ata3.00: status: { DRDY }
[ 4887.628218] ata3: hard resetting link
[ 4892.980074] ata3: link is slow to respond, please be patient (ready=0)
[ 4897.660073] ata3: COMRESET failed (errno=-16)
[ 4897.660107] ata3: hard resetting link
[ 4903.012073] ata3: link is slow to respond, please be patient (ready=0)
[ 4907.692073] ata3: COMRESET failed (errno=-16)
[ 4907.692108] ata3: hard resetting link
[ 4913.044075] ata3: link is slow to respond, please be patient (ready=0)
[ 4942.748072] ata3: COMRESET failed (errno=-16)
[ 4942.748108] ata3: limiting SATA link speed to 1.5 Gbps
[ 4942.748111] ata3: hard resetting link
[ 4947.800072] ata3: COMRESET failed (errno=-16)
[ 4947.800107] ata3: reset failed, giving up
[ 4947.800123] ata3.00: disable device
[ 4947.800144] sd 2:0:0:0: [sdc] tag#19 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=91s
[ 4947.800150] sd 2:0:0:0: [sdc] tag#19 Sense Key : Not Ready [current]
[ 4947.800153] sd 2:0:0:0: [sdc] tag#19 Add. Sense: Logical unit not ready, hard reset required
[ 4947.800156] sd 2:0:0:0: [sdc] tag#19 CDB: Read(10) 28 00 77 3b cf 80 00 00 08 00
[ 4947.800158] I/O error, dev sdc, sector 2000408448 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
[ 4947.800198] ata3: EH complete
[ 4947.800294] sd 2:0:0:0: [sdc] tag#20 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ 4947.800299] sd 2:0:0:0: [sdc] tag#20 CDB: Read(10) 28 00 77 3b cf 80 00 00 08 00
[ 4947.800301] I/O error, dev sdc, sector 2000408448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 4947.800330] Buffer I/O error on dev sdc1, logical block 250050800, async page read
[ 4947.800719] sd 2:0:0:0: [sdc] tag#21 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ 4947.800726] sd 2:0:0:0: [sdc] tag#21 CDB: Read(10) 28 00 00 00 08 02 00 00 02 00
[ 4947.800728] I/O error, dev sdc, sector 2050 op 0x0:(READ) flags 0x1000 phys_seg 1 prio class 2
[ 4947.800774] EXT4-fs (sdc1): unable to read superblock
Quote:
root@debian2:~# lsblk -d -fs /dev/sdc1
NAME FSTYPE FSVER LABEL UUID FSAVAIL FSUSE% MOUNTPOINTS
sdc1 ext4 1.0 c906cd55-242f-44be-a701-26432a46ccfd
└─sdc
root@debian2:~# df -H
Filesystem Size Used Avail Use% Mounted on
udev 4.1G 0 4.1G 0% /dev
tmpfs 822M 820k 821M 1% /run
/dev/sda2 62G 2.0G 57G 4% /
tmpfs 4.2G 0 4.2G 0% /dev/shm
tmpfs 5.3M 0 5.3M 0% /run/lock
/dev/sda1 536M 6.2M 530M 2% /boot/efi
tmpfs 822M 0 822M 0% /run/user/0
/dev/sdb1 984G 26G 908G 3% /media/ssd71
root@debian2:~# mount /dev/sdc1 /media/bad/
mount: /media/bad: can't read superblock on /dev/sdc1.
dmesg(1) may have more information after failed mount system call.
/dev/sdb1 984G 26G 908G 3% /media/ssd71 este alt HDD