Amiko Viper 4K V20

Amiko Viper 4K V20
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
Tip receptor Full HD 1080p, Ultra HD 4K 2160p, MPEG2, MPEG4, H.264, H.265 / HEVC, Linux, DVB-S2, DVB-T2, DVB-C, Conax, Ethernet, Wireless, PVR, FTA Receptor DVB-S2X 4K UHD Multistream
Conexiune Wi-Fi 2,4 GHz încorporată și Ethernet 100 Mbps
Tuner performant de satelit S2X si T2/C Hybrid
Cpu: 1.6GHz Quad Core 64 bit CPU Hi3798MV200
Gpu: Multi-Core Mali 450MP GPU (650MHz)
Memorie RAM: 1 GB DDR3
Spațiu de stocare: 4 GB
Conexiuni USB: 1x3.0 & 1x2.0
Cititor card microSD (pana la 32Gb)
Sistem de operare Linux Enigma 2
Funcție PVR (Personal Video Recoder - înregistrare programe TV)
Funcție Timeshift (pauză/play)
Update firmware online
Youtube Video, Media Player, aplicații Android
Ieșire HDMI 2.0 type A, 4K 60p
Ieșire audio digitala S/PDIF
Spațiu de stocare: 8 GB
2 Tunere: DVB-S2 și DVB-T2/C
DiSEqC 1.0, 1.1, 1.2 și USALS
Cititor de card încorporat Conax
Telecomandă cu infraroșu
Live Streaming in reteaua locală (prin Add-on)


Ultra HD DVB-S2X+ T2/C Digital Satellite Receiver
Linux OS
1.6GHz Quad Core 64 bit CPU Hi3798MV200
High-Performance Multi-Core Mali 450 CPU
4GB EMMC
1 GB DDR3 RAM Memory
1 x USB 2.0 Port and 1 x USB 3.0 Port
100 Mbps Ethernet interface
2.4G built in WiFi
Smart Card Reader
Up to 3840 x2160@60fps, 1 0bit,H DR 1 0 Support
Tuner & Channel Decoder Satellite:
Tuner type:DVB-S2X SiLabs-Multistream decoding
Input Connector: F-type, IEC 169-24, Female Frequency Range: 950MHz ~ 2150MHz
Input Impedance: 75Ω,
Signal Level: -79 to -11dBm
LNB Power: 13/18VDC, max.400mA
22KHz Tone: (22±2)KHz, (0.7±0.2)V
DISEqC Control: V1.0/1.2/USALS Compatible
Demodulation: QPSK / 8PSK
Input Symbol Rate: 1 ~ 45 MSym/s
FEC Decoder: 1/2,3/5,2/3,3/4,4/5,5/6,7/8,8/9,9/10 (QPSK)

Tuner & Channel Decoder (DVB-T2/C hybrid emedded)
MPEG Transport Stream A/V Decoding: 3/5,2/3,3/4,4/5,5/6,8/9,9/10(8PSK)
Transport Stream: AVC/H.264(MPEG-4 part 10), MPEG-4 part2 (ISO/IEC 14496) MPEG-2 (ISO/IEC 13818-2)
Profile Level: AVC/H.264 MP and HP @L3.1(60fps) AVC/H.264 HP @L4.2(30fps) MPEG-2 MP @ ML and HL
Input Rate: Max. 80Mbit/s
Video Formats: 4:3 Letter Box, 4:3 PanScan, 16 : 9
Video Resolution: 720 x 576i, 720 x 576p, 720 x 480i, 720 x 480p 1280 x 720p, 1920 x 1080i, 1920 x 1080p
Audio Decoding: AAC LC, AAC LC+SBR Level 2, AAC+ Level 4, WMA pro, Dolby Digital, MPEG-1 Layer 1,2
Audio Mode: Streo/Mono, Dolby digital, MPEG and AAC audio
Sampling Rate: 16KHz, 32KHz, 44.1KHz and 48KHz(According to input)

Main System
Processor:Hisilicon Hi3798MV200 HuaweiQuad Core 64Bit (4x 1.6GHz) 15000 DMIPS
Memory Flash: 4GB eMMC
RAM Memory : 1GB (DDR3)

Video Decoding
Decode: MPEG-2: MP@ML MPEG-4:ASP@L5
H.265/AVC:MP@L3.2 VC-1:AP@L1
Resolution: 4K 2160P/1080p/ 1080i/720p/576p/480p/576i/480i
Video Standard: PAL/NTSC
Data Rate: Up to 15Mbits/s
Display Format: 4:3,16:9

Audio / Video & Data IN/OUT
CVBS & Audio: 3.5 mm Jack
HDMI: Video & Audio Output
RS-232C: 9 pin D-SUB (Male) type, Transfer rate 115Kbps
USB Port:1x USB 3.0, 1x USB 2.0
Ethernet: RJ45 connector, 10/100 Base
2.4G built in WiFi

Front / Rear Panel
Slot: 1 Smart Card slot
Display: 7-Segment - 4 Digits
Indicatiors: 1LED (Standby, Power & Remote : Dual Color)

Power Supply
Input Voltage: AC 100 ~ 250V, 50/60Hz
Type: DC ADAPTOR (12V, 2A)
Power Consumption: Max. 15W
Standby Power: Max. 0.5W
Protection: Separate Internal Fuse & Lighting protection

Physical Specification
Size (W x H x D): 210mm X 40mm X 145mm
Weight (Net): 0.6Kg
Operating Temp.: 0°C ~ +45°C
Storage Temp.: 10°C ~ +70°C
[Only registered and activated users can see links. Click Here To Register...]
pretul in ro 420 roni

cam acelasi model cu
IZIBOX ONE 4K DVB-S2X + DVB-C/T2
[Only registered and activated users can see links. Click Here To Register...]
Hitube 4K UHD Combo DVB-S2X Sat & DVB-T2/C
[Only registered and activated users can see links. Click Here To Register...]
Anadol MULTIBOX 4K UHD Combo
Maxytec MULTIBOX 4K UHD
[Only registered and activated users can see links. Click Here To Register...]
deci banuesc ca ar fii compatibile imaginile

image download:
openatv
[Only registered and activated users can see links. Click Here To Register...]

pure2
[Only registered and activated users can see links. Click Here To Register...]

Prin ce se diferențiază acest model față de versiunea anterioară?

pure2 6.5
[Only registered and activated users can see links. Click Here To Register...]

Buna seara!Cum instalam versiunile softului de mai sus (PurE2 6.5 de exemplu)?Si cum putem inregistra un program pe Amiko 4k v20 combo(pipat!e stick ).Multumesc antic

Bună seara!As dori sa știu cum instalam aceate softuri (Pure2 6.5 de exemplu).De asemenea, as vrea sa aflu cum pot înregistra o anumită emisiune pe stick(care sunt pașii,meniul fiind unul extrem de stufos).Mulțumesc anticipat!

Amiko Viper 4K V20
Openvision-10.2-r300

[Only registered and activated users can see links. Click Here To Register...]

openfix-5.4.19-viper4kv20-20210304
[Only registered and activated users can see links. Click Here To Register...]

@[Only registered and activated users can see links. Click Here To Register...]

am cautat eu in locul tau pe net

how to flash an amiko viper 4k

Download and unzip the image of your choice.

Copy the Amico folder to a FAT32 formatted USB Stick.

Turn off Receiver.

Plug it into a USB port on the receiver.

Turn on the Receiver and press the green button on the remote control several times, until the word "UPDATE" appears on the decoder display and wait until the process is complete.

traducere cu Google

Descărcați și dezarhivați imaginea la alegere.

Copiați folderul Amico pe un stick USB formatat FAT32.

Opriți receptorul.

Conectați-l la un port USB de pe receptor.

Porniți receptorul și apăsați butonul verde de pe telecomandă de mai multe ori, până când pe afișajul decodorului apare cuvântul „ACTUALIZARE” și așteptați până la finalizarea procesului.

Using the OpenATV image as an example
1. Download OpenATV image, link in topic OpenATV image for Amiko Viper 4K V20.
2. Unpack the downloaded archive openatv-6.4-viper4kv20-20210215_mmc.zip (this is the latest image and has this file name as of February 15, 2021) to your computer.
3. As a result of unpacking, we get the amiko folder, which contains the u57 subfolder with files for installing Enigma2.
4. Copy the amiko folder to the formatted USB drive (in FAT32 format), which contains the u57 subfolder with the files for installing Enigma2.
5. Disconnect the receiver from the network.
6. Insert the USB stick into the blue USB 3.0 port of the receiver (the rest of the USB ports must be free!).
7. Switch on the receiver. 8. When “MENU” appears on the display of the receiver, press the green button on the remote control. The display will show uptd and then the Enigma2 installation will begin. The installation progress will be displayed on the TV screen. Do not interrupt the installation! After installation, the receiver will reboot with the new Enigma2. Attention! It is recommended to use a UPS to avoid power outages. Original source Attention! There are times when Enigma2 won't load. Then the following clarification should be applied.
Necessary:
1. Current image of OpenATV or PurE2 (or others)
2.USB drive 4GB
3. Windows PC and DiskGenius Software Now you just need to format the USB stick with "DiskGenius" to FAT32, unzip the downloaded archive, copy the amiko folder to the USB stick and remove the USB stick with "safely eject". Power off the receiver, insert the USB stick into the blue USB port, turn on the power again, and immediately press the green button on the remote control for a few seconds. The image is installed and launched.

Un Egami 10.0 pentru acest receptor , sau 9.6 mai bine ,
are cineva ! Dau o bere ... evident virtuala !!!