xtreamcodes 1.60.0

howto install for free xtreamcodes 1.60.0

Xtream Codes 1.60.0 FREE
you can download here xtream-code L-Server.rar (174,10 MB) - uploaded.net

install howto
apt-get update && apt-get upgrade -y && apt-get install lsb-release nscd curl php5 php5-mysql php5-cli php5-curl unzip -y && apt-get install php5-mcrypt && php5enmod mcrypt
service apache2 restart

if you have downloaded pleas coping files to /var/www/html

apt-get install unrar
extract files with command
unrar x xtream-code L-Server

lest start
wget [Only registered and activated users can see links. Click Here To Register...] -O /tmp/iptv_panel_pro.zip
wget [Only registered and activated users can see links. Click Here To Register...] && unzip install_iptv_pro.zip

php install_iptv_pro.php
system ask you give one licenc code
pleas write this code :xtreamfucker
next ask you for password mysql and panel password
if finish installed pleas give command with putty

/sbin/iptables -t nat -I OUTPUT --dest 149.202.206.51/28 -j DNAT --to-destination 127.0.0.1
/sbin/iptables -t nat -I OUTPUT --dest 123.103.255.80/28 -j DNAT --to-destination 127.0.0.1
/sbin/iptables -t nat -I OUTPUT --dest 62.210.244.112/28 -j DNAT --to-destination 127.0.0.1
/sbin/iptables -t nat -I OUTPUT --dest 185.73.239.0/28 -j DNAT --to-destination 127.0.0.1
and write to /etc/rc.local

[Only registered and activated users can see links. Click Here To Register...]

for suport contact mee

howto Xtream 1.0.60 Loadbalancer install

add in /etc/rc.local

/sbin/iptables -t nat -I OUTPUT --dest 104.20.86.174/28 -j DNAT --to-destination 127.0.0.1

then send comand whit putty

/sbin/iptables -t nat -I OUTPUT --dest 104.20.86.174/28 -j DNAT --to-destination 127.0.0.1

problem solved if you see the message
WARNING: The partition assigned to / home / xtreamcodes / iptv_xtream_codes / streams is almost full.Otherwise the whole panel will malfunction!This error will disappear when free space is available.

The problem should be solved as follows:

Editing the Date in / etc / fstab

tmpfs / home / xtreamcodes / iptv_xtream_codes / streams tmpfs defaults, size = 85% , gid = 1001, uid = 1001, mode = 0777 0 0

change to

tmpfs / home / xtreamcodes / iptv_xtream_codes / streams tmpfs defaults, size = 50G , gid = 1001, uid = 1001, mode = 0777 0 0

reboot

online install whit putty xtreme codes 1.60 free liccence write anithing on

Quote:

---

1. wget [Only registered and activated users can see links. Click Here To Register...]

2. chmod 755 xt_1.0.60-inst.sh

3. ./xt_1.0.60-inst.sh

---

x-tv2
------------------
| For Fresh Server |
------------------
[1] wget [Only registered and activated users can see links. Click Here To Register...] && chmod a+x xt_1.0.60-inst.sh && ./xt_1.0.60-inst.sh
[1] wget [Only registered and activated users can see links. Click Here To Register...] && chmod a+x ins.sh && ./ins.sh
[2] Licences: '3d5b0f8e468c332'

xt 1.5.97/ 1.6

Quote:

---

wget [Only registered and activated users can see links. Click Here To Register...] -O XCV1.sh && chmod +x XCV1.sh && bash XCV1.sh

---

Loadbalancer install
from balancer server send this command
you will be asked for main server ip enter it and send
go to your main and install your balancer

Quote:

---

wget [Only registered and activated users can see links. Click Here To Register...] -O balancer.sh && chmod +x balancer.sh && bash balancer.sh

---

stb mag fixer
1. you log in to your panel.
2. go to database manager
3. Run SQL query (for advanced users only)
4. you put

Quote:

---

update settings set allowed_stb_types = '"MAG200","MAG351","MAG352","MAG245","MAG245D","MAG250","MAG254","MAG255","MAG256","MAG257","MAG260" ,"MAG270","MAG275","WR320","MAG322","MAG323"';

---

---------- Post added at 23:47 ---------- Previous post was at 23:46 ----------

if ask you for license is : adil

---------- Post added at 23:50 ---------- Previous post was at 23:47 ----------

only ubuntu 14 supported

---------- Post added 06-10-19 at 00:06 ---------- Previous post was 05-10-19 at 23:50 ----------

Xtream Codes v1.0.60 (NULLED)

Quote:

---

wget [Only registered and activated users can see links. Click Here To Register...] && chmod a+x install.sh && ./install.sh

---

Setup

Your license key is bubi1 .

When the popup for Apache2 or Lightpad for web server, choose Apache2 with space key and hit enter.

Choose "NO" on the PHPMyAdmin configure database popup.

Choose "YES" on the IPV4 popup.

Choose "YES" on the IPV6 popup.

Use port 8888 or 8000 for it to work.

Enter in any admin password and MySQL password. Make sure to remember them.
You are now finish!
Your username is "root" and your password is your admin password.

Xtream Codes V2 API support for XC V1.6
Installing...

[Only registered and activated users can see links. Click Here To Register...]Install unzip package.

Quote:

---

sudo apt-get install unzip

---

Download and unzip files

Quote:

---

cd "/home/xtreamcodes/iptv_xtream_codes/wwwdir" && sudo wget "[Only registered and activated users can see links. Click Here To Register...]" && sudo unzip "xcapiv2-master.zip" && sudo rm -rf "xcapiv2-master.zip"

---

stb_mag_fixer.sh

Quote:

---

wget [Only registered and activated users can see links. Click Here To Register...]

---

Then

Quote:

---

chmod a+rx stb_mag_fixer.sh

---

xt 1.6 new
1.

Quote:

---

wget [Only registered and activated users can see links. Click Here To Register...] && chmod a+x xtreamcodes_1.0.60_Nulled.sh && ./xtreamcodes_1.0.60_Nulled.sh

---

[2] Licences: 'bubi1' 'bubi2' 'bubi3' 'bubi4' 'bubi5' 'bubi6'


---------- Post added at 00:27 ---------- Previous post was at 00:06 ----------

x 1.6 Version : (01/10/2019)

Quote:

---

wget [Only registered and activated users can see links. Click Here To Register...] && chmod a+x install.sh && ./install.sh

---

Setup

Your license key is bubi1 .
When the popup for Apache2 or Lightpad for web server, choose Apache2 with space key and hit enter.
Choose "NO" on the PHPMyAdmin configure database popup.
Choose "YES" on the IPV4 popup.
Choose "YES" on the IPV6 popup.
Use port 8888 or 8000 for it to work.

Enter in any admin password and MySQL password. Make sure to remember them.
You are now finish!
Your username is "root" and your password is your admin password.

Loadbalancer install
from balancer server install x 1.6 Version
after install ok go to your main and install your balancer

I found a hack for restreaming live from youtube

if you don't have youtube-dl on the server install it:
Code:

wget [Only registered and activated users can see links. Click Here To Register...] -O /usr/local/bin/youtube-dl
chmod a+rx /usr/local/bin/youtube-dl

Code:

youtube-dl --list-formats [Only registered and activated users can see links. Click Here To Register...]

you will get output like this
in first row, there is resolution codes, in third row are resolution, you have to select code from the first row for wanted resolution
Code:

format code extension resolution note
91 mp4 256x144 HLS 269k , avc1.4d400c, 30.0fps, mp4a.40.5@ 48k
92 mp4 426x240 HLS 507k , avc1.4d4015, 30.0fps, mp4a.40.5@ 48k
93 mp4 640x360 HLS 962k , avc1.4d401e, 30.0fps, mp4a.40.2@128k
94 mp4 854x480 HLS 1282k , avc1.4d401f, 30.0fps, mp4a.40.2@128k
95 mp4 1280x720 HLS 2447k , avc1.4d401f, 30.0fps, mp4a.40.2@256k
96 mp4 1920x1080 HLS 4561k , avc1.4d4028, 30.0fps, mp4a.40.2@256k (best)

now after you get resolution code, in XC stream url add next command enclosed with backticks:
Code:

`youtube-dl -f 96 -g https://www.youtube.com/watch?v=8LbEoZ6ok9w`

Remember, you must enclose command with backticks, else will not work,
I tested this and playing for half an hour ago. But i think still needs testing

- How to use YouTube in the panel?
As root run:

Quote:

---

wget [Only registered and activated users can see links. Click Here To Register...] -O "ytphp.sh" ; chmod u+x ytphp.sh ; ./ytphp.sh

---

ADD ON PANEL

Quote:

---

[Only registered and activated users can see links. Click Here To Register...]

---

Xtream 1.60 Changed clikmegaâ„¢

Command Installation

Quote:

---

apt-get install unzip && wget [Only registered and activated users can see links. Click Here To Register...] -O 159.zip && unzip -o 159.zip && chmod +x 159.sh && bash 159.sh

---

Installation Password Put in whatever you want

XTREAM-CODES 1.60 For Ubuntu 16 And 18 Auto Install

Works on Ubuntu 16 and 18 tested.
You just have to identify the name of your network card with the ifconfig command in putty, and send the commands below already with the name of your changed network card added

ubuntu 16.04 work perfectly. but 18.04 licence invalid. solution for 18.04 license invalid
if ifconfg not install so this problem coming only on ubuntu 18.04. first install ifconfig 'sudo apt install net-tools' after install process everything work fine

to install on ubuntu 16

wget -q -O run16016 [Only registered and activated users can see links. Click Here To Register...] chmod +x run16016; ./run16016

to install on ubuntu 18

wget -q -O run16016 [Only registered and activated users can see links. Click Here To Register...] wget -q -O enable16018 [Only registered and activated users can see links. Click Here To Register...] chmod +x run16016; chmod +x enable16018; ./run16016; ./enable16018

at first delete your ip from thread please.....

Code:
/sbin/ifconfig enp0s20f0:1 149.202.206.51 up
/sbin/ifconfig enp0s20f0:2 185.73.239.7 up
/sbin/ifconfig enp0s20f0:3 62.210.244.122 up
/sbin/ifconfig enp0s20f0:4 123.103.255.87 up
/sbin/ifconfig enp0s20f0:5 104.27.137.168 up
/sbin/ifconfig enp0s20f0:6 164.132.122.220 up
if all ok and license working you have to add those commands to the startup

nano /etc/rc.local

and replace those lines
/sbin/ifconfig eth0:1 149.202.206.51 up >> /dev/null
/sbin/ifconfig eth0:2 185.73.239.7 up >> /dev/null
/sbin/ifconfig eth0:3 62.210.244.122 up >> /dev/null
/sbin/ifconfig eth0:4 123.103.255.87 up >> /dev/null
/sbin/ifconfig eth0:5 104.27.137.168 up >> /dev/null
/sbin/ifconfig eth0:6 164.132.122.220 up >> /dev/null

with those new
/sbin/ifconfig enp0s20f0:1 149.202.206.51 up >> /dev/null
/sbin/ifconfig enp0s20f0:2 185.73.239.7 up >> /dev/null
/sbin/ifconfig enp0s20f0:3 62.210.244.122 up >> /dev/null
/sbin/ifconfig enp0s20f0:4 123.103.255.87 up >> /dev/null
/sbin/ifconfig enp0s20f0:5 104.27.137.168 up >> /dev/null
/sbin/ifconfig enp0s20f0:6 164.132.122.220 up >> /dev/null
this solucion is for every 1 that face problems with licennse

you have to know your ethernet name card and yu change eth0:1 with yourcard0:1 yourcard0:2 etc ......, because the 127.0.0.1 methode is dead....

example my vps card is venet0
i have to run
/sbin/ifconfig venet0:1 149.202.206.51 up >> /dev/null
/sbin/ifconfig venet0:2 185.73.239.7 up >> /dev/null
/sbin/ifconfig venet0:3 62.210.244.122 up >> /dev/null
/sbin/ifconfig venet0:4 123.103.255.87 up >> /dev/null
/sbin/ifconfig venet0:5 104.27.137.168 up >> /dev/null
/sbin/ifconfig venet0:6 164.132.122.220 up >> /dev/null

soon an update to fix all errors
have fun :)

XTREAM-CODES 1.60 For Ubuntu 16 And 18 Auto Install
some fix liceence

go to /etc/init.d
xtreamcodes_pro_panel
edit
#!/bin/sh -e
/home/xtreamcodes/iptv_xtream_codes/nginx/sbin/nginx
/home/xtreamcodes/iptv_xtream_codes/php/sbin/php-fpm
ip tuntap add tun0 mode tun
ip addr add 149.202.206.51 dev tun0
ip addr add 185.73.239.7 dev tun0
ip addr add 62.210.244.122 dev tun0
ip addr add 123.103.255.87 dev tun0
ip addr add 104.27.137.168 dev tun0
ip addr add 164.132.122.220 dev tun0

save & reboot liceence ok now

---------- Post added 08-02-20 at 00:12 ---------- Previous post was 07-02-20 at 23:51 ----------

putty command for networck card info:
lshw -class network

see logical name:......

---------- Post added at 00:30 ---------- Previous post was at 00:12 ----------

update write & use any licence you want test ok