LNB Triple-feed Single Monoblock LNB 13E+16E+19.2E for 90cm dish

LNB Triple-feed Single Monoblock LNB 13°E+16°E+19.2°E for 90cm dish

[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]

[Only registered and activated users can see links. Click Here To Register...]

[Only registered and activated users can see links. Click Here To Register...]

[Only registered and activated users can see links. Click Here To Register...]


[Only registered and activated users can see links. Click Here To Register...]

[Only registered and activated users can see links. Click Here To Register...]

[Only registered and activated users can see links. Click Here To Register...]

[Only registered and activated users can see links. Click Here To Register...]

[Only registered and activated users can see links. Click Here To Register...]

[Only registered and activated users can see links. Click Here To Register...]

"Frumos", ptr. publicul tinta, si mai putin initializat, e mana cereasca: mai putina bataie de cap cu multifeed-ul. Mai multa, daca vrei sa cascadezi si cu alta pozitie (1W? ptr noi din RO), o sa iti trebuiasca un diseq mai pretentions (scump). Oricum nu e gandit ptr. asta. Un pret info?

Unde-l gasim de cumparat?
pe net n-am reusit...
thanks!

am testat acest lnb impreuna cu o antena offset triax 88 Size (cm) 85x95 si pot sa va confirm ca :
receptia satelitilor astra 19,2e si hotbird 13e este foarte buna ,iar satelitul eutelsat 16a este buna in marea majoritate a frecventelor

lnb a costat 30 euro+transport din germania

salut am si eu acest lnb,intrebarea mea il pot pune in cascada cu un diseq golden4/1 protocol 2.0,sau cu un diseq optibox 8/1protocol1.1,astept un raspuns de la voi?

Eu zic ca da dar totul se bazează pe teste, deci tu trebuie să te chinui puțin și să ai răbdare

ok dar cu ce diseq cu optibox 8/1protocol 1.1?sau merge si diseq golden 4/1 protocol 2.0!

Uite un pic ce spune wiki:

"Versions and compatibility[[Only registered and activated users can see links. Click Here To Register...]]

A number of versions of DiSEqC exist:

• DiSEqC 1.0, which allows switching between up to 4 satellite sources
• DiSEqC 1.1, which allows switching between up to 16 sources
• DiSEqC 1.2, which allows switching between up to 16 sources, and control of a single axis satellite motor
• DiSEqC 2.0, which adds bi-directional communications to DiSEqC 1.0
• DiSEqC 2.1, which adds bi-directional communications to DiSEqC 1.1
• DiSEqC 2.2, which adds bi-directional communications to DiSEqC 1.2

All four^{[[Only registered and activated users can see links. Click Here To Register...] - there are 6; to which 4 does this refer?]} variations were standardized by February 1998, prior to general use of digital [Only registered and activated users can see links. Click Here To Register...]. The later versions are backwards compatible with the lower revisions, but the lower revisions are, as might be expected, not forwards compatible with the higher revision numbers. 1.x and 2.x versions are both backwards and forwards compatible.
The terms DiSEqC 1.3 and 2.3 are also often used by manufacturers and retailers to refer to the use of DiSEqC with other protocols. For example, 1.3 usually refers to a receiver which uses [Only registered and activated users can see links. Click Here To Register...] in conjunction with the DiSEqC 1.2 protocol. Such terminology has not been authorised by [Only registered and activated users can see links. Click Here To Register...].
The following table shows compatibility between the various DiSEqC versions:

	1.0 switch	1.1 switch	1.2 motor	2.0 switch	2.1 switch	2.2 motor
1.0 receiver	Yes	No	No	Yes	No	No
1.1 receiver	Yes	Yes	No	Yes	Yes	No
1.2 receiver	Yes	Yes	Yes	Yes	Yes	Yes
2.0 receiver	Yes	No	No	Yes	No	No
2.1 receiver	Yes	Yes	No	Yes	Yes	No
2.2 receiver	Yes	Yes	Yes	Yes	Yes	Yes

NOTE: a 1.x receiver will not be able to receive communication from a switch or motor. Usually this is not important, as the switch or motor can be controlled by the receiver without problems."

multumesc mult de raspuns,asta gasisem si eu pe google mai de mult.

Quote:

---

Originally Posted by mrx76 [Only registered and activated users can see links. Click Here To Register...]

salut am si eu acest lnb,intrebarea mea il pot pune in cascada cu un diseq golden4/1 protocol 2.0,sau cu un diseq optibox 8/1protocol1.1,astept un raspuns de la voi?

---

Salut,
Ai reusit pana la urma sa cascadezi cum ai zis?

vreau sa fac si eu aceeasi situatie.

Ms mult.

Buna.
Am cumparat si eu lnb-ul de mai sus, a functionat bine o perioada, apoi din cauza vantului sa dereglat antena si de atunci am tot probleme, posibil din cauza nepriceperii mele.
Antena e reglata corect, cred(nu sunt chiar sigur),am verificat cu un receptor amiko si am semnal pe toti 3 satelitii, respectiv 13, 16 si 19. As vrea sa insumez semnalul de la acest lnb cu semnalul de la o alta antena reglata pe Thor 5(Digi).
Pana acum am reusit sa fac sa functioneze doar 2 sateliti concomitent, 13 si 0.8, mai demult imi functionau toti 3 satelitii de pe lnb 3feed(acum nu merge decat unul odata), dar niciodata nu am reusit sa fac sa functioneze toti 4 odata, adica 3+1.
Folosesc DM800hd, cu diseqc 1. Banuiesc ca si DM800hd imi face probleme ptr ca imi tot dispar satelitii selectati din tuner si tot trebuie sa incarc lista noua de sateliti si de multe ori nu imi arata semnal de la sateliti. Ce trebuie sa fac sa imi functioneze toti 4 satelitii odata?

Pai, eu zic sa incepi sa elimini problemele una cate una, incepand cu receptorul, antena, comutatorul diseq, lnb. O mufare necorespunzatoare sau o selectie incorecta a satelitilor in DM, te duc la lipsa de semnal imediat. Si tu ai acolo o selectie intreaga de potentiale probleme.

@[Only registered and activated users can see links. Click Here To Register...]

salut,

Mai pune un Diseq 8+1, pe input 1 pui cablul de la 13,16,19 si pe input 2 pe cel de la thor. Apoi reglezi in receiver . Vezi ca LNB ul pentru 13,16,19 are in el deja un disec 1,0. setezi diseq 1.0 pe port A pentru 16 e, port b pt 13 si port c pentru 19. setezi diseq 1.1 pe port 1 pentru astea apoi setezi diseq 1,1 port 2 pentru thor.