Config oscam reader bigi N3

poate sa ma ajute cineva sa config un card bigi pe un router wl500gp v2, cititor smargo, instalat si testat cu cartela tvr hd, cu bigi nu reusesc

---------- Post added at 21:14 ---------- Previous post was at 21:09 ----------

011/05/13 11:12:10 C04 h restarting reader digi
2011/05/13 11:12:10 C04 h creating thread for device /dev/ttyUSB0
2011/05/13 11:12:10 2E007 r reader thread started (thread= 2E007, label=digi, device=/dev/ttyUSB0, detect=cd, mhz=368, cardmhz=368)
2011/05/13 11:12:10 2E007 r smargo init
2011/05/13 11:12:11 2E007 r digi card detected
2011/05/13 11:12:19 2E007 r Error activating card.
2011/05/13 11:12:27 2E007 r Error activating card.
2011/05/13 11:12:36 2E007 r Error activating card.




[reader]
label = digi
protocol = smargo
device = /dev/ttyUSB0
services = digi
fallback = 1
caid = 1802
rsakey = Dxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx27
boxkey = ExxxxxxxxxxxxxxxxxD
detect = cd
mhz = 368
cardmhz = 368
group = 1,2,3,4
emmcache = 1,3,2

NU exista protocol smartgo
poti folosi mouse sau smartreader

mai verifica odata, exista

trecel pe mouse in smargo merge cand vrea, cu toate ca scoate ecm mai mic:

[reader]
label = digi
#protocol = smargo
protocol = mouse
device = /dev/ttyUSB0
services = digi
#fallback = 1
fallback = 0
caid = 1802
rsakey = Dxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx27
boxkey = ExxxxxxxxxxxxxxxxxD
detect = cd
mhz = 368
cardmhz = 368
#group = 1,2,3,4 # ID UNIC pe reader, MultiID pui pe USERS
group = 1
emmcache = 1,3,2

da, am reusit dar am un ecm de 0.750- 1.100 , mi se pare prea mare, vreo rezolvare?

la smargo nu am facut nici un update, trebuia????


ce ecm ar trebui sa am???

Un ecm bun pentru caid-ul tau e 0.300-0.350. E ceva in neregula acolo, poate la smargo, dar vezi ce-i faci sa nu ramai fara el!!
Pune si alta versiune de oscam.....

Quote:

---

Originally Posted by costel_mcb [Only registered and activated users can see links. Click Here To Register...]

da, am reusit dar am un ecm de 0.750- 1.100 , mi se pare prea mare, vreo rezolvare?

la smargo nu am facut nici un update, trebuia????


ce ecm ar trebui sa am???

---

cauze multiple, smargo progr/fw, driverele ftdi, usb....
pentru smargo:
MODE=autoswich
FREQ=3.69
KERNEL=normal
T=1(nagra)
EGT=0
T=1

poti sa-mi dai un loink cu programu, eu am gasit ceva dar nu pot sa setez FREQ=3.69

ai incercat aici:
[Only registered and activated users can see links. Click Here To Register...]
fw V.1.3, 1.4 nu am testat, 1.5 am inteles ca e un fake
sau in google :smartreader tool

ai tot ce trebuie aici(recomandat in linux)
[Only registered and activated users can see links. Click Here To Register...]

acum am vazut ...nici nu trebuie pe 3.69 il lasi in autoswich doar in fixed ii pui FREQ

Aveti grija cu update la smargo 1.5 daca nu e original se duce!!!!!
Versiunea 1.4 e buna nu trebe 1.5

si la mine sunt probleme pe 1802, in mouse protocol nu vrea de nici un chip sa initializeze, nici pe receiver nici pe ubuntu, pe PC merge cu smartreader cu un ecm de 300 si in smargo mode dar cu un ecm de 650!!!
pe receiver daca pun in smargo initializeaza cu ecm 570-700, dar nu mai initiaza tvr care e in mouse....!
Am mutat si TVR pe smargo si acolo surpriza ecm e la 100ms.
Ca si setari singurele cu care functioneaza ambele:
[CODE[reader]
label = digi / tvr
enable = 1
protocol = smargo
device = /dev/ttyUSB0 / ttyUSB1
smargopatch = 1
#####1802##################
mhz = 480 ????
cardmhz = 368
#####TVR###################
mhz = 481
cardmhz = 357
[/CODE]
mentionez ca in sbox functioneaza cu ecm 300-350ms.
intrebarea ar fi la ce freq sa-l setez in smargo (cardul N3) pentru un ecm mai mic?
testele au fost facute cu 2 smargo unl cu fw1.3 celalalt cu 1.4,

MODE=autoswich
FREQ=3.69
KERNEL=normal
T=1 si T=0 # testat ambele variante pe ambele smargo
EGT=0

---------- Post added at 18:43 ---------- Previous post was at 17:13 ----------

cu cat urc catre 12mhz vad ca tot scade, minim la 12mhz 390ms la 9,6mhz 435ms
exista posibilitatea sa-l bulesc la un 10 mhz pe reader smargo in protocol smargo(nu mouse)?

Salut
Am si eu un card de gigel citit de smargo pe un pc cu mandriva 2010, dar ecm-ul este mai decent decat ce ai reusit sa scoti din smargo-ul tau. Mai exact am smargo cu firmware 1.4 cu urmatoarele setari pentru gigel tv in oscam.server

protocol = smartreader
device = Serial:Reader 191
services = services1
smargopatch = 1
caid = 1802
rsakey = ************************************
boxkey = **********
detect = cd
mhz = 369
cardmhz = 357
group = 1
emmcache = 1,3,2

iar rezultatul este acesta:

2011/05/15 21:54:22 B4BB1280 c digi (1802&000000/041A/92:9A9C): found (276 ms) by smargodigi (of 1 avail 1)
2011/05/15 21:55:03 B4BB1280 c digi (1802&000000/03F5/92:4486): found (285 ms) by smargodigi (of 1 avail 1)

Sper sa iti fie de ajutor.

daca mai citesti odata ceea ce am scris sus, dar cu atentie ai sa observi ca e ca si la tine:)
adica 300ms

la mine nu deschide cardu decat in protocol smargo, in mouse si in smartreader nu vrea deloc, ce versiune de oscam aveti, am incercat cu ultimile versiuni si nu vrea cu nici una

[reader]
label = 3434343
enable = 0
protocol = smartreader
device = /dev/ttyUSB0
services = digi
caid = 1802
rsakey = D3xxxxxxxxxx27
boxkey = EjhjjxxxxxxxxD
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,3,2




2011/05/17 3:41:05 C04 h restarting reader 3434343
2011/05/17 3:41:05 C04 h creating thread for device /dev/ttyUSB0
2011/05/17 3:41:05 4C05 r reader thread started (thread= 4C05, label=3434343, device=/dev/ttyUSB0, detect=cd, mhz=368, cardmhz=368)
2011/05/17 3:41:05 4C05 r ERROR, you have specified 'protocol = smartreader' in oscam.server,
2011/05/17 3:41:05 4C05 r recompile with SmartReader support.
2011/05/17 3:41:05 4C05 r Cannot open device: /dev/ttyUSB0


in mouse


[reader]
label = digib
enable = 0
protocol = mouse
device = /dev/ttyUSB0
services = digi
showcls = 0
caid = 1802
rsakey = D3xxxxxxxxxxxxxxxxxxD27
boxkey = ExxxxxxxxxD
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,3,2

2011/05/17 3:42:47 C04 h restarting reader digib
2011/05/17 3:42:47 C04 h creating thread for device /dev/ttyUSB0
2011/05/17 3:42:47 5005 r reader thread started (thread= 5005, label=digib, device=/dev/ttyUSB0, detect=cd, mhz=368, cardmhz=368)
2011/05/17 3:42:50 5005 r digib card detected
2011/05/17 3:42:53 5005 r ATR: 00 00
2011/05/17 3:42:53 5005 r ERROR: Could not read reader->convention
2011/05/17 3:42:53 5005 r Error activating card.
2011/05/17 3:42:58 5005 r ATR: 00 00
2011/05/17 3:42:58 5005 r ERROR: Could not read reader->convention
2011/05/17 3:42:58 5005 r Error activating card.
2011/05/17 3:43:02 5005 r ATR: 00 00
2011/05/17 3:43:02 5005 r ERROR: Could not read reader->convention
2011/05/17 3:43:02 5005 r Error activating card.
2011/05/17 3:43:03 5005 r card initializing error


deschide doar in protocol smargo dar cu ecm foarte mare 0.700

testast cu 2 smargo v1.3 si v1.4

vreo solutie pt un ecm mai mic