Smargo si imaginea RSP

Introduceti acesti driveri in lib/modules :
(Copy usbserial.ko, ftdi_sio.ko in /lib/modules)

[Only registered and activated users can see links. Click Here To Register...]


Editati /var/config/start.sh in felul urmator:
(Edit /var/config/start.sh)

Code:

---

mknod /dev/ttyUSB0 c 188 0
chmod 666 /dev/ttyUSB0
insmod $MODDIR/usbserial.ko
insmod $MODDIR/ftdi_sio.ko

---

Setati Smargo cu Kernel = Normal si restul valorilor in functie de cardul folosit.

Pentru cardul TVR am setat asa:
(Smargo Settinngs: )

[Only registered and activated users can see links. Click Here To Register...]

Code:

---

<newCSconfig>
    <readers name="Phoenix"><device>
            <name>Smargo</name>
            <type>smartreader+</type>
            <mhz>369</mhz>
            <node>/dev/ttyUSB0</node>
            <parity>none</parity>
            <reset>normal</reset>
            <export>Yes</export>
            <enabled>Yes</enabled>
            <blocksa>No</blocksa>
            <blockua>No</blockua>
            <blockga>No</blockga>
            <PTShandshake>No</PTShandshake>
            <carddetect>yes</carddetect>
            <newcamd_port>12001</newcamd_port>
            <autosid>Yes</autosid>
            <Seca-PPV>no</Seca-PPV>
            <pincode>0000</pincode>
            <priority>round</priority>
        </device>
    </readers>

---

A incercat cineva Smargo + D@lce pe Rsp? Daca da, cum?

Am incercat eu, nu merge, citeste ATR si atat, nici gigel nu vrea.Hocus merge.

Ati incercat si cu Oscam ?

Cu Oscam initializeaza cardul N3 corect, dar nu deschide.Am folosit setarile puse de @romeo in alt topic cu versiunea 1566.