otheitis
31-03-09, 19:06
Hypercam 1.01
Version 1.01 compatible with major PPC receiver and also with some HD receivers like IPBox9000 and QBOXHD
Enjoy
--------------
Release 1.01
--------------
=> Major release. Now we are no more in 0.xx !
=> Fixed one deadlock case
=> Fixed one null pointer causing hypercam to crash on startup with log disabled
=> Experimental : now supporting other PPC based STB (http://forum.sifteam.eu/autolink.php?id=44&forumid=119&script=showthread) receivers running Enigma 1
=> Experimental : now supporting QBOX HD. Please read the README.QBOXHD for setup instructions
=> Experimental : now supporting IPBOX 9000. Please read the README.IPBOX for setup instructions
Upload-Drive : Free File Hosting (http://www.upload-drive.com/12282/Desktop_rar)
HYPERCAM on SH4 - ABCOM IP9000HD / Cuberevo Setup Instructions|
| |
================================================== ===============
INTRODUCTION
------------
Here is a brief note on installation process required on
ABCOM IP9000 HD / CUBEREVO from DGS.
For now, The hypercam version delivered is only compatible with
firmwares based on DGS images ( including NLB images), and using sbox
as GUI.
Actually, it's only able to manage the 'Live' descrambling (http://forum.sifteam.eu/autolink.php?id=110&forumid=119&script=showthread) !
Future releases will also support PIP (http://forum.sifteam.eu/autolink.php?id=182&forumid=119&script=showthread) / PVR (http://forum.sifteam.eu/autolink.php?id=192&forumid=119&script=showthread) descrambling (http://forum.sifteam.eu/autolink.php?id=110&forumid=119&script=showthread).
Hypercam has just been adapted to handle decryption operations on
this firmware / drivers. In a 'near' futur, drivers could change on the
receiver and results in hypercam no more decrypting or crashing.
You've been warned !
Also please note that this binary has IP9000 dedicated embedded settings,
so it won't work on other SH4 based STB (http://forum.sifteam.eu/autolink.php?id=44&forumid=119&script=showthread) such as QBoX or others, nor IP9000
under Enigma2 images.
Now it's up to you to use or not hypercam. Enjoy it !
================================================== ===============
SETUP INSTRUCTIONS
------------------
For now, you have to use a very simple installer.
1 - transfer the archive hypercam_1_1_cuberevo.tar into /tmp on receiver
2 - connect with telnet to cuberevo receiver
3- go into /tmp directory ==> cd /tmp
4 - untar the archive ==> tar xvf hypercam_1_1_cuberevo.tar
5 - Be sure the hyper_install.sh script is executable
if not ==> chmod 755 hyper_install.sh
6 - Execute installer
./hyper_install.sh
Confirm installation when prompted
7 - It can be necessary to configure your own settings, by editing
file /var/bin/hypercam.cfg
8 - when ready, type :
/var/bin/start_hypercam.sh
All activity reportings are, by default, written in /tmp
hypercam.peers State of connected peers
hypercam.localcards List of cards detected in smartcard (http://forum.sifteam.eu/autolink.php?id=45&forumid=119&script=showthread) readers
hypercam.cards List of all available cards (local & remote)
hypercam.schemes List of available encryption schemes
for current channel
Version 1.01 compatible with major PPC receiver and also with some HD receivers like IPBox9000 and QBOXHD
Enjoy
--------------
Release 1.01
--------------
=> Major release. Now we are no more in 0.xx !
=> Fixed one deadlock case
=> Fixed one null pointer causing hypercam to crash on startup with log disabled
=> Experimental : now supporting other PPC based STB (http://forum.sifteam.eu/autolink.php?id=44&forumid=119&script=showthread) receivers running Enigma 1
=> Experimental : now supporting QBOX HD. Please read the README.QBOXHD for setup instructions
=> Experimental : now supporting IPBOX 9000. Please read the README.IPBOX for setup instructions
Upload-Drive : Free File Hosting (http://www.upload-drive.com/12282/Desktop_rar)
HYPERCAM on SH4 - ABCOM IP9000HD / Cuberevo Setup Instructions|
| |
================================================== ===============
INTRODUCTION
------------
Here is a brief note on installation process required on
ABCOM IP9000 HD / CUBEREVO from DGS.
For now, The hypercam version delivered is only compatible with
firmwares based on DGS images ( including NLB images), and using sbox
as GUI.
Actually, it's only able to manage the 'Live' descrambling (http://forum.sifteam.eu/autolink.php?id=110&forumid=119&script=showthread) !
Future releases will also support PIP (http://forum.sifteam.eu/autolink.php?id=182&forumid=119&script=showthread) / PVR (http://forum.sifteam.eu/autolink.php?id=192&forumid=119&script=showthread) descrambling (http://forum.sifteam.eu/autolink.php?id=110&forumid=119&script=showthread).
Hypercam has just been adapted to handle decryption operations on
this firmware / drivers. In a 'near' futur, drivers could change on the
receiver and results in hypercam no more decrypting or crashing.
You've been warned !
Also please note that this binary has IP9000 dedicated embedded settings,
so it won't work on other SH4 based STB (http://forum.sifteam.eu/autolink.php?id=44&forumid=119&script=showthread) such as QBoX or others, nor IP9000
under Enigma2 images.
Now it's up to you to use or not hypercam. Enjoy it !
================================================== ===============
SETUP INSTRUCTIONS
------------------
For now, you have to use a very simple installer.
1 - transfer the archive hypercam_1_1_cuberevo.tar into /tmp on receiver
2 - connect with telnet to cuberevo receiver
3- go into /tmp directory ==> cd /tmp
4 - untar the archive ==> tar xvf hypercam_1_1_cuberevo.tar
5 - Be sure the hyper_install.sh script is executable
if not ==> chmod 755 hyper_install.sh
6 - Execute installer
./hyper_install.sh
Confirm installation when prompted
7 - It can be necessary to configure your own settings, by editing
file /var/bin/hypercam.cfg
8 - when ready, type :
/var/bin/start_hypercam.sh
All activity reportings are, by default, written in /tmp
hypercam.peers State of connected peers
hypercam.localcards List of cards detected in smartcard (http://forum.sifteam.eu/autolink.php?id=45&forumid=119&script=showthread) readers
hypercam.cards List of all available cards (local & remote)
hypercam.schemes List of available encryption schemes
for current channel