Rog foarte mult sa ma ajutati, spun de ce. Sunt incepetor in sharring.De abia am facut rost de niste rinduri aprox 5-6,si asara cineva mi-a spart serveru oscam(lung de povestit),In afara de spart mai si pica ziua oscamu ,se opreste si gata.Ma dau afara clienti fiindca nu sunt online. M-am saturat ,asta e , si un alt motiv.
Am zis incerc cu asta daca stii ceva in legatura te rog sa-mi zici,e stabil sau nu?
Am downloadat un incubuscamd 1.21 vesiune.Va pun file-ul .conf ,ma rog sa-mi semnati acolo cu o alta culoare unde trebuie modificat.Am portul 1200 deschis,as-i vrea ,si ,sa am webinerface. Cu oscam foloseam port 8888. As-i vrea sa dau la clientii mei cu hop 3 deci sa poate sa dea mai departe. Am un zip incubuscamd 1.21.tar.gz cum sa bag la locul lui? Cum pot instala? /menu/buton verde/emu/incubuscamd 0.99 si incubuscamd config 0.99
Downloadezi cum am facut cu oscam, si dupa file-uriile sa le schimb? Daca asa fac ,nu trebuie modificari in fisiere,ip-uri,porturi,enable disable /var/key , /var/bin ,/var/ emu? Am Pkt E2 ultimul 233 usb Ipbox 910 cu hdd. (daca stii spunemi si asta,la imaginnile astea E2 Pkt cum sa modifik user pasw pt ftp,pt telnetca si asara cineva a reusit sa intra in box,banuiesc stie paswordu pentru ca nu am schimbat a ramas originalul.)La Nlb stiu cum trebe din webinterface dar din pkt nu stiu cum se modifica. Va rog nu va suparati pe mine.Dar este important ca nu o sa mai am nici o linie.
Mersii pt rabdarea acordata.
Asta e vers 1.21 care am downlodat ultima data.
##############################################################################
# incubusCamd configuration file #
# All configuration options in this file observe the same format: #
# <configuration_name>=<configuration_value> #
# #
# Each section are [<section_name>:<option_1>:<option_x>] like. #
# #
# No matter about white spaces on any place or UNIX/DOS style files #
##############################################################################
########################### general configuration ############################
[General]
# Enable (1) or disable (0) background execution
# 0 - Off
# 1 - On
#
background_execution=0
# Set the nice value (priority) of the camd process
# possible values: -20 (most favorable scheduling) to 19 (least favorable).
#
nice_value=0
# This sets the level of console output for debugging:
# 0 - No debug messages, 1 - First level debug messages, 2 - Second level debug messages,
# 3 - Print all debug messages
#
debug_level=0
# This option enables (1) or disables (0) the writing of debug information to the
# console.
#
log_to_console=0
# This option enables (1) or disables (0) the writing of console output to a log file
#
log_to_file=0
# When log_to_file is set to 1, this is the path and filename to write console
# ouput to.
#
logfile_name=/var/bin/incubusCamd.log
# This is the path and filename to read SoftCam.Key file
# by default it will be searched in the /var/keys directory
#
softcamfile_name=/var/keys/SoftCam.Key
# This is the path and filename to read prio file
# by default it will be searched in the /var/bin directory, or in /etc, or in /var/keys
#
priofile_name=/var/bin/incubusCamd.prio
# This is the path and filename to read providersinfo file, used in webinterface
# by default it will be searched in the /var/bin directory
#
providerinfo_file_name=/var/bin/incubusCamd.providers
# This is the path and filename to read channelinfo file, used in webinterface
# by default it will be searched in the /var/bin directory
#
channelinfo_file_name=/var/bin/incubusCamd.channelinfo
# Used to activate on-screen messages. Username and password required if
# HTTP authentication is enabled on enigma.
# 0 - Off
# 1 - On
#
on_screen_messages_show=1
on_screen_messages_username=root
on_screen_messages_password=
on_screen_messages_key_update=0
on_screen_messages_wait_for_key_update=0
on_screen_messages_ecm=0
on_screen_messages_emm=0
# When activated, incubusCamd will listen on the specified port for connections. All
# log activity will be broadcast in real-time to connected clients.
#
console_logs_broadcast=0
console_logs_broadcast_port=666
# Enable/disable incubusCamd web interface (default port is 668).
# 0 - Disable
# 1 - Enable
#
webif=1
webif_port=668
# This is the port used to share your cards with other clients
# in other words this is the port where other clients must be connected to you if they want to
# receive your cards shared
# default is 12000
#
clients_port=12000
# This is the minimum client version required if you want to connect to the server
# with this setting you can force that clients at least use a certain version otherwise they are denied when logging in
# by default there is no minimum client version required
#
#minimum_clients_version=2.1.4
# Enable/disable a client on two hops away to send the updates to the cardserver
# 0 - Disable
# 1 - Enable
#
extra_emm_level=1
# Option to set global share limits
#
# global_limits={ caid:id(:downhops), caid:id(:downhops), ... }
#
#example:
#
#global_limits={ 0100:000080, 0622:000000:1, 0500:000000:2 }
#
# all users get no 0100:000080.
# and our 0622:000000 cards only for themself (1 hop down),
# and 0500 cards for themself plus one additional hop down.
# global limits are overridden by client specific limits (see [Clients] section)
########################### provider configuration ###########################
#
# All parameters are in hexadecimal notation.
# Each section is defined by the provider id value.
# If you don't know the provider id value then use the provider id "000000" and ca id "0000".
# On provider 000000 caid 0000 goes all provider wich are not declared. If the provider
# is declared then the cam will use the provider founded.
#
[Prov:000000:CaID:0000]
# ----------------------------------------------------------------------------
# this provider is a stand-in for all cards and all caid not declared previously
#
# You can select wich type of priority to assign on each caid/prov combination
# priority name available are: card,emu,cs
# card: internal card reader
# emu: internal emulator
# cs: card share protocols
# each type must be separated by a comma
#
# you can also set to use only cs and nothing more, to do it insert on each comma "cs"
# example: check_priority=cs,cs,cs # only cs in this case
# example: check_priority=card,emu,emu # no cs in this case
# obviously this is not suggested but if you prefer to disable an option you should do it in this way
# you can also declare only one type: check_priority=cs
# or two types: check_priority=cs,emu
# and so on
check_priority=cs,emu,card
# You can select wich protocol will be used first for the current caid/prov combination
# protocol name available are: newcamd,cccam,gbox,radegast,camd33,camd35,aroureos
# each protocol must be separated by a comma
#
# you can also declare only one type: cs_protocol_order=cccam
# or two types: cs_protocol_order=cccam,newcamd
# and so on
cs_protocol_order=cccam,newcamd,gbox,camd35,camd33,radegast,aroureos
# Enable (1) or disable (0) emm process when a cs protocol is used
# 0 - Off
# 1 - On
#
process_emms_on_cs_mode=0
# Enable (1) or disable (0) emm g type process
# 0 - Off
# 1 - On
#
process_emm_g=0
# Enable (1) or disable (0) emm s type process
# 0 - Off
# 1 - On
#
process_emm_s=0
# Enable (1) or disable (0) emm u type process
# 0 - Off
# 1 - On
#
process_emm_u=0
# Enable (1) or disable (0) seca 3 ecm pid handler
# when is set to On, it will try to use seca 3 ecm pid
# before try seca 2 ecm pid, otherwise seca 2 pid will
# be selected firstly
# 0 - Off
# 1 - On
#
seca3_handler=0
# This is the ChannelID wich will be used as first value
# on irdeto channels. Value "-1" means no preferred channel id will be used.
# You can use more than one pref chid, you have to separe them with a comma ',' (see example 2).
# The value is expressed as 4 digits hex value (2 bytes). Automatic change will be done.
# example: chid=0015
# example 2: chid=0015,002A
#chid=-1
# This is the max value wich will be used as comparing value
# for card's uphops. If a less or equal uphops will be found then the card will be used,
# the cards with greater uphops value will be ignored.
# The value is expressed as decimal value, by default a value equal to 5 is set by the cam
#max_check_uphops=5
#[Prov:000501:CaID:1833]
#check_priority=cs,emu,card
#cs_protocol_order=cccam,newcamd,gbox,camd35,camd33,radegast,aroureos
#process_emms_on_cs_mode=0
#process_emm_g=0
#process_emm_s=0
#process_emm_u=0
#seca3_handler=0
#chid=-1
#max_check_uphops=5
########################### servers configuration ############################
[Servers]
#
# This is the section for the multi-server configuration.
#
# URL of card-server to use, formats are as follows:
#
# newcamd://<username_31>:<password_31>@<hostname>:<port>:<caid_4>:<prov_id_6>/<des_key_14>/[EMM]/<nr_of_hops_away>
# aroureos://@<hostname>:<port>:<caid_4>:<prov_id_6>/[EMM]/<nr_of_hops_away>
# radegast://@<hostname>:<port>:<caid_4>:<prov_id_6>/[EMM]/<nr_of_hops_away>
# camd33://<username_10>:<password_10>@<hostname>:<port>:<caid_4>:<prov_id_6>/[aes_key_16]/[EMM]/<nr_of_hops_away>
# camd35://<username_32>:<password_32>@<hostname>:<port>:<caid_4>:<prov_id_6>/[EMM]/<nr_of_hops_away>
# gbox://<localhost>:<localport>:<password_8>@<peer_address>:<peer_port>:<peer_pass_8>/[EMM]
#
# cccam://<username_20>:<password_32>@<hostname>:<port>/[receive_emu_shared]/[EMM]
# where [receive_emu_shared] should assume value "yes" (without quotes, if you like to receive emus data shared by the server) or "no" (this is assumed by default)
# and it's an optional parameter.
#
# where [EMM] should assume value "EMM" (without quotes, if you like to send EMMs data to the server) or just do not add anything if you do not want EMM
#
# where <nr_of_hops_away> is the number of hopdown you want to share your card: by default is set to 1 (only one share down enabled from you)
#
# NOTE: The "EMM" suffix is optional and tells the card-server client whether
# to send EMM's to the card-server or not. Enabling or disabling this only
# has effect if the card-server is configured to accept emms from this client.
#
# NOTE 2: You can set value 0000 for caid and value 000000 for provider id on newcamd server if you want an all codifies working server
# or simply if you don't know wich value to set on, just put 0 value
#
# i.e:
#
#card_server_url=cccam://username:password@192.168.1.24:12000
#card_server_url=cccam://username:password@yourname.dyndns.org:15000
#card_server_url=gbox://yourname.dyndns.org:6666:password@hisname.dyndns.org:6666:peer_pass
#card_server_url=cccam://username:password@hostname:port/no # cccam without emu shared
#card_server_url=cccam://username:password@hostname:port/yes # cccam with emu shared
#card_server_url=cccam://username:password@hostname:port/yes/EMM # cccam with emu shared and with EMM enabled
#card_server_url=gbox://192.168.1.24:5555:password@192.168.1.32:4444:peer_pass
#card_server_url=newcamd://username:password@192.168.0.100:10550:0500:028800/0102030405060708091011121314
#card_server_url=radegast://@192.168.0.100:10550:0100:000065
#card_server_url=aroureos://@yourhostname.dyndns.org:10666:0500:007C00
#card_server_url=camd35://username:password@192.168.0.50:14150:0603:000000
#card_server_url=camd33://username:password@192.168.0.50:10550:0603:000000 # cam33 without AES encryption
#card_server_url=camd33://username:password@192.168.0.50:10500:0604:000000/01020304050607080910111213141516 # cam33 with AES encryption
#card_server_url=newcamd://username:password@192.168.0.100:10550:0500:028800/0102030405060708091011121314/EMM/2 # EMM is enabled for this server and will share this card 2 hops away from us
#card_server_url=newcamd://username:password@192.168.0.100:10551:0000:000000/0102030405060708091011121314/EMM/0 # this server will be used with all codifies because of value 0 for caid and provid, no share for this card
########################### clients configuration ############################
[Clients]
#
# This is the section for the multi-client configuration.
# The port used to make other clients connected is declared in the general section like "clients_port".
#
# URL of card-client to use, formats are as follows:
#
# cccam://<username_20>:<password_32>@[hostname]/[allow_emu_shared]/[receive_EMM]/[uphops] { caid:id(:downhops), caid:id(:downhops), ... } { caid:id:sid, caid:id:sid, ... } { begintime-endtime, ... }
# where [hostname] should assume value of your client ip address if you want to make limitation on address connections for an account
# where [allow_emu_shared] should assume value "yes" (without quotes, if you like to share emus data with clients, this is assumed by default) or "no"
# where [receive_EMM] should assume value "yes" (without quotes, if you like to receive EMM data from clients, this is assumed by default) or "no"
# where [uphops] is the max number of uphops of cards that can be shared to the client
# downshare limits per share (default = no limits) and optional
# downshare limits per share based on caid:id:sid
# and optional timeslots in which share is valid (to block channels on box of children after 19:00 for instance)
# if no timeslot is defined 24 hrs a day is used
# emus are shared only one level down, even if no limits given
#
# i.e:
#
#card_client_url=cccam://username:password@192.168.1.15/yes/yes # this clients will receive emu and can send emm to us
#card_client_url=cccam://username:password@192.168.1.21/no # this client can not receive emu but can send emm to us
#card_client_url=cccam://username:password@192.168.1.20/no/no # this client can not receiver emu and can't send emm to us
#card_client_url=cccam://username:password@192.168.1.23/no/yes # this client can not receive emu but can send emm to us
#card_client_url=cccam://username:password@192.168.1.222/yes/no # this client can receive emu but can't send emm to us
#card_client_url=cccam://username:password@yourname.dyndns.org # this client will receive emu and can send emm to us
#card_client_url=cccam://username:password@ # this client will receive emu and can send emm to us and has no restriction on the hostname address, previous examples have all restriction on one address
#card_client_url=cccam://username:password@/yes/no # this client will receive emu but can't send emm to us and has no restriction on the hostname address
#card_client_url=cccam://username:password@/no/no/2 # this client can't receive emu and can't send emm to us and has no restriction on the hostname address and gets all our shares at max 2 hops from us
#card_client_url=cccam://username:password@/no/no/2 { 0100:000080, 0622:000000:1, 0500:000000:2 }
# this client can't receive emu and can't send emm to us and has no restriction on the hostname address and gets all our shares at max 2 hops from us
# gets no 0100:000080 and our 0622:000000 cards only for himself (1 hop down),
# and 0500 cards for himself plus one additional hop down.
#card_client_url=cccam://username:password@/no/no/2 { 0:0:3, 0100:000080:1 }
# this client can't receive emu and can't send emm to us and has no restriction on the hostname address and gets all our shares at max 2 hops from us
# get's to share them down two further levels beyond his own level.
# But he is not allowed to share 0100:000080 down to other users.
#card_client_url=cccam://username:password@/no/no/2 { 0:0:3, 0100:000080:1 } { 0100:000080:15df }
# this client can't receive emu and can't send emm to us and has no restriction on the hostname address and gets all our shares at max 2 hops from us
# get's to share them down two further levels beyond his own level.
# But he is not allowed to share 0100:000080 down to other users.
# He is also not allowed to view channel 0100:000080:15df
#card_client_url=cccam://username:password@/no/no/2 { } { } { 12:00-17:00, 19:00-20:00 }
# this client can't receive emu and can't send emm to us and has no restriction on the hostname address and gets all our shares at max 2 hops from us
# the share is only valid between 12:00 and 17:00 and between 19:00 and 20:00
# outside these hours the share will not give cw's to the client
########################### CaIDs tunneling configuration ############################
[CaIDTunnel]
#
# All values are in hex notation
# In this file you can configure what CAIDs/PIDs incubusCamd should tunnel to another CAID
#
# situation 1: this caid, all idents, on all channels will use the tunnel_caid
# caid:tunnel_caid
#
# situation 2: this caid/ident pair will use the tunnel_caid
# caid:tunnel_caid:ident
#
# situation 3: this caid/ident pair, on channel 'sid' will use the tunnel_caid
# caid:tunnel_caid:ident:sid
#
# i.e:
#
#1833:1702:000000:0082 # this one should tunnel premiereHD nagra3 into betacrypt cards
#1833:1702:000000:0081 # this one should tunnel premiereHD nagra3 into betacrypt cards