EnF70
26-12-08, 19:18
[English]
Description:
A plugin for automatically changing the video mode according to the format of the selected channel.
Install:
1) Copy AutoRes.tgz on Kathy in /tmp
2) Execute: tar zxvf /tmp/AutoRes.tgz -C /
3) Invoke "Restart GUI" from Menu
Config:
Menu -> Setup -> System -> Autoresolution...
Contribution:
I've adapted and tested this plugin for E2 Kathy. (minor changes, just to get it running)
(I've kept the original plugin as 'plugin.py.orig' for reference)
Notes:
1) "iServiceInformation.sProgressive" is not implemented in E2 rev.600 and
hence there is no difference yet between "576i" and "576p" - only one of them will work
720p and 1080i are ok as they don't have both "i" and "p".
2) "576i" cannot be selected as target by default as it's missing from
/usr/lib/enigma2/python/Plugins/SystemPlugins/Videomode/VideoHardware.py
You'll need to add this video mode manually if you want to use it:
For instance (in VideoHardware.py)
modes["HDMI"] = ["576i", "576p", "720p", "1080i", "1080p"]
widescreen_modes = set(["576i", "576p", "720p", "1080i", "1080p"])
You'll see that "576i" is not present in these two lists.
(Caution: Some TV sets don't support this video mode)
[Romana]
Se poate folosi acest plugin pentru schimbarea automata a modului video
in functie de formatul canalului selectat.
Instalare:
1) Se copiaza AutoRes.tgz pe Kathy in /tmp
2) Se executa: tar zxvf /tmp/AutoRes.tgz -C /
3) Se da "Restart GUI" din menu
Configurare:
Menu -> Setup -> System -> Autoresolution...
Am adaptat si testat acest plugin pentru E2 Kathy.
Modificari minime, cat sa functioneze bine.
(am pastrat plugin-ul original sub numele 'plugin.py.orig')
Note:
1) "iServiceInformation.sProgressive" nu este implementat in E2 rev.600 si din
acest motiv nu se poate face deocamdata distinctie intre 576i si 576p.
720p si 1080i sunt ok - pentru ca nu au si "i" si "p".
2) Pentru cine doreste "576i" in loc de "576p", acest mod trebuie adaugat in
/usr/lib/enigma2/python/Plugins/SystemPlugins/Videomode/VideoHardware.py
De exemplu (in VideoHardware.py)
modes["HDMI"] = ["576i", "576p", "720p", "1080i", "1080p"]
widescreen_modes = set(["576i", "576p", "720p", "1080i", "1080p"])
O sa vedeti ca "576i" nu apare in lista (Atentie: unele TV-uri nici nu-l suporta).
210
Description:
A plugin for automatically changing the video mode according to the format of the selected channel.
Install:
1) Copy AutoRes.tgz on Kathy in /tmp
2) Execute: tar zxvf /tmp/AutoRes.tgz -C /
3) Invoke "Restart GUI" from Menu
Config:
Menu -> Setup -> System -> Autoresolution...
Contribution:
I've adapted and tested this plugin for E2 Kathy. (minor changes, just to get it running)
(I've kept the original plugin as 'plugin.py.orig' for reference)
Notes:
1) "iServiceInformation.sProgressive" is not implemented in E2 rev.600 and
hence there is no difference yet between "576i" and "576p" - only one of them will work
720p and 1080i are ok as they don't have both "i" and "p".
2) "576i" cannot be selected as target by default as it's missing from
/usr/lib/enigma2/python/Plugins/SystemPlugins/Videomode/VideoHardware.py
You'll need to add this video mode manually if you want to use it:
For instance (in VideoHardware.py)
modes["HDMI"] = ["576i", "576p", "720p", "1080i", "1080p"]
widescreen_modes = set(["576i", "576p", "720p", "1080i", "1080p"])
You'll see that "576i" is not present in these two lists.
(Caution: Some TV sets don't support this video mode)
[Romana]
Se poate folosi acest plugin pentru schimbarea automata a modului video
in functie de formatul canalului selectat.
Instalare:
1) Se copiaza AutoRes.tgz pe Kathy in /tmp
2) Se executa: tar zxvf /tmp/AutoRes.tgz -C /
3) Se da "Restart GUI" din menu
Configurare:
Menu -> Setup -> System -> Autoresolution...
Am adaptat si testat acest plugin pentru E2 Kathy.
Modificari minime, cat sa functioneze bine.
(am pastrat plugin-ul original sub numele 'plugin.py.orig')
Note:
1) "iServiceInformation.sProgressive" nu este implementat in E2 rev.600 si din
acest motiv nu se poate face deocamdata distinctie intre 576i si 576p.
720p si 1080i sunt ok - pentru ca nu au si "i" si "p".
2) Pentru cine doreste "576i" in loc de "576p", acest mod trebuie adaugat in
/usr/lib/enigma2/python/Plugins/SystemPlugins/Videomode/VideoHardware.py
De exemplu (in VideoHardware.py)
modes["HDMI"] = ["576i", "576p", "720p", "1080i", "1080p"]
widescreen_modes = set(["576i", "576p", "720p", "1080i", "1080p"])
O sa vedeti ca "576i" nu apare in lista (Atentie: unele TV-uri nici nu-l suporta).
210